As you can see in the following pictures the camera is like pointing to a side. What could be the problem and the cause? Is there any solution?

Thanks in Advance! {:3_60:}

#1

#2

#3

#4

Look at that front rubber bushing it looks funky, Looks like it needs to be replaced.

My Channel
https://www.youtube.com/channel/UC6fqGgjRbBF83v1MF-TqfHA

hd_ultra@msn.co Posted at 2014-9-25 09:11
Look at that front rubber bushing it looks funky,

What you mean by that? sorry

simonfeaugas@gm Posted at 2014-9-25 09:13
What you mean by that? sorry

Looks like the white rubber isolator is broken. Between the camera and body.  

hd_ultra@msn.co Posted at 2014-9-25 09:16
Looks like the white rubber isolator is broken. Between the camera and body.

the one on the left, right?

simonfeaugas@gm Posted at 2014-9-25 09:19
the one on the left, right?

Facing the camera on the left. Check to see if it is in place.

hd_ultra@msn.co Posted at 2014-9-25 09:20
Facing the camera on the left. Check to see if it is in place.

Thanks!! Indeed it's broken, i have to change it.

simonfeaugas@gm Posted at 2014-9-25 09:24
Thanks!! Indeed it's broken, i have to change it.

No problem my friend. Always glad to help where I can. Those things tear real easy. When you put it through the whole use your fingers to pull it thru. Using a screwdriver to poke it through will tear the rubber very easy.

Good Luck.

hd_ultra@msn.co Posted at 2014-9-25 09:32
No problem my friend. Always glad to help where I can. Those things tear real easy. When you put i ...

Hey Ultra! I Have a question. When I change the rubber taking out the plastic security is not easy, I think the i have to "break" the plastic and put a new one. it's that right?

More than likely it will break. I did got mine off without breaking it. I used needle nose plyers, and gentle push downward, force to it. And they came off. There are extras in your little silver bag.

hd_ultra@msn.co Posted at 2014-9-26 04:02
More than likely it will break. I did get mine off without breaking it. I used needle nose plyers, a ...

Yeah I thought so, I just change them anyway I bought a pair more just for the next time! Thanks!

FromAdronesEye Posted at 2014-9-26 04:10
Yeah I thought so, I just change them anyway I bought a pair more just for the next time! Thanks!

Anytime my friend.

It looks like u have not removed the cap on the camera lens. The extra weight of the cap will cause the camera to tilt downwards.

It's  not the lens cap. his rubber ioslater was broken

hd_ultra@msn.co Posted at 2014-9-26 04:17
Anytime my friend.

Hey HD! I'm uploading some pic after changing the rubber but I think the camera it pointing sidesway, let me know if you know how to solve this.

Thanks in advance

Here are the picture, I dont know why this happend and how to repair it

If anyone out there can help I really appreciate it!{:2_27:}

Like fadeawaychen said, remove the lens protector.
It's hard on the gimbal motors to run them with it left on the camera when the airframe is energized.
With everything as it should be, see if your camera still leans.

The isolation damper didn't tear itself...
perhaps a flip over or a rough landing?
Leaving the lens protector on...
not a common thing, I hope?
The gimbal is a fragile mechanism.
Even minor mistreatment could be the root of your problem.

Can you send a pic that is in the right orientation.And with the cam in the up direction.

Thanks Buddy

hd_ultra@msn.co Posted at 2014-9-27 03:25
Can you send a pic that is in the right orientation.And with the cam in the up direction.

Thanks B ...

Uploading now!

Here you one, let me know if they work

I see it now a lot better.
You could try and fly it and bounce right to left hard a few times while your in the air. And see if it's not level.

After that if it's not level:

A full IMU recalibration in the software assistant may cure it.

See if this works for you. If not there are 2 other ways if it is a real problem for you.

hd_ultra@msn.co Posted at 2014-9-27 07:07
I see it now a lot better.
You could try and fly it and bounce right to left hard a few times while  ...

Thanks! I'll try that and i let you know!