Please select Into the mobile phone version | Continue to access the computer ver.
how to use Zenmuse Z15-5D III HD-Auto-calibration Function with l...
907 8 2016-1-10
Uploading and Loding Picture ...(0/1)
o(^-^)o
GerryPacher
lvl.4
Flight distance : 4323622 ft
  • >>>
Switzerland
Offline

Hi

How can I activate the Zenmuse Z15-5d auto calibration function with the new lightbridge 2 and DJI controller? The mode switch (Atti / GPS) is reserved for compass calibration. Many thanks for a feedback.

Regards, Gerry


2016-1-10
Use props
GerryPacher
lvl.4
Flight distance : 4323622 ft
  • >>>
Switzerland
Offline

Hi DJI Support - do you have an answer for my question please? Thanks in advanced.
2016-1-12
Use props
Hsphoto
lvl.1

United States
Offline

Gerry I have the same problem I know that when I napped the gimbal mode to a three position switch and rocked it five or so times it calibrated
2016-1-14
Use props
Hsphoto
lvl.1

United States
Offline

But i'm currently having a trouble where the gimbal swings faces foward. Then won't take any commands afterwards. I wish I could get an answer soon also
2016-1-14
Use props
Hsphoto
lvl.1

United States
Offline

Seems we got our Wish see the support page for GCU upgrade released today 1-14-2016
2016-1-14
Use props
GerryPacher
lvl.4
Flight distance : 4323622 ft
  • >>>
Switzerland
Offline

Hi guys - thank you for your replies! I will check out the GCU upgrade! Will post a feedback afterwards. Regards, Gerry
2016-1-15
Use props
GerryPacher
lvl.4
Flight distance : 4323622 ft
  • >>>
Switzerland
Offline

Hi guys, the auto calibration of the gimbal works now! Good work DJI!

Regards, Gerry
2016-1-16
Use props
sfrederi
lvl.1
Flight distance : 200541 ft
United States
Offline

GerryPacher Posted at 2016-1-17 03:01
Hi guys, the auto calibration of the gimbal works now! Good work DJI!

Regards, Gerry

GerryPacher,

Can you provide a little more detail?  Did you have to do anything to activate the "auto" calibration, or did the gimbal calibrate on its own during its power on dance?
2016-2-7
Use props
GerryPacher
lvl.4
Flight distance : 4323622 ft
  • >>>
Switzerland
Offline

sfrederi Posted at 2016-2-7 16:12
GerryPacher,

Can you provide a little more detail?  Did you have to do anything to activate the " ...

Hi sfrederi

You have to activate the Gimbal Auto-Calibration by yourself. Turn on the controller, turn on the copter and start the DJI app. you will find the calibration function under the tab "gimbal". That's it. Hope this helps. Kind regards. Gerry
2016-2-11
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules