I have a major problem with Ronin M after doing the most recent updates:
Software Assist v2.2 Firmware IMU v1.4 GCU v1.2
After doing the update, power cycling the Ronin and restoring to Default values, my Ronin will not pan or tilt smoothly at all. The Ronin hesistates before panning or tilting, and there are pauses during pans/tilts and as the Ronin returns to center. The pauses are dramatically worse when using the thumb controller (it starts and stops during pans/tilts and when returning to center). I double checked my balance, tried dozens of setting options, reverted to Default settings, Fine Tuning and System Calibration multiple times, but the problem remains. BTW, I tried to re-apply the firmware update, but the Ronin app won't let me as it says everything is up to date. At this point, I will not be able to use my Ronin until I get this sorted out. I wish I could revert back to the older firmware, but I doubt this is an option. My Ronin M has worked flawlessly since I got it, and I now regret doing the update. I did the update as I wanted to order one of the new batteries as a backup, and the firmware suggested the update would require it.
Here is a video link that demonstrates the problems I am experiencing: https://youtu.be/BW3C7Jh2kKc
Any suggestions about how to fix this would be greatly appreciated! I have an shoot coming up, and need to get this fixed ASAP. |