s900 & GH4 Combo, System Frequency
2618 10 2015-1-2
Uploading and Loding Picture ...(0/1)
o(^-^)o
Elevate
lvl.4
Flight distance : 296427 ft
  • >>>
United Kingdom
Offline

Hello guys! So we are using the s900/GH4 combo which is marvelous, however we've come across a slight issue to do with the System Frequency.

So after a few test shoots/flights we wanted to start shooting true 4k. So to shoot true 4k you need to set your frequnecy to 24.00Hz (Cinema), however when we power on with this as the setting we get a white screen and no image on our monitor (Black Pearl), previously we were using 50.00Hz (PAL) and it worked everytime no problem. To overcome the issue we have to set the camera to 50.00Hz, start up the drone, then while its on switch back to the 24.00Hz so we can shoot in true 4k.

Ideally we would like to be able to power on while in 24.00Hz to avoid this messing around. Anyone else experienced this or has any resolutions?


With thanks,

Dan
2015-1-2
Use props
DJI-Dboy
lvl.3

China
Offline

What's your video transmitting system? LightBridge?
2015-1-7
Use props
Elevate
lvl.4
Flight distance : 296427 ft
  • >>>
United Kingdom
Offline

DJI-Dboy Posted at 2015-1-8 10:35
What's your video transmitting system? LightBridge?

Hey!

I think its just the standard 5.8ghz Immersion transmitter, nothing special at the moment!

Dan
2015-1-13
Use props
Elevate
lvl.4
Flight distance : 296427 ft
  • >>>
United Kingdom
Offline

Anyone else able to look at this? Thanks!!!
2015-1-26
Use props
DJI-Jackson
lvl.3
Flight distance : 51243 ft
  • >>>
China
Offline

Elevate Posted at 2015-1-27 03:25
Anyone else able to look at this? Thanks!!!

Hi, Elevate.

How about change another monitor?  It seems would be some kinds of problem with this monitor.

2015-1-27
Use props
Elevate
lvl.4
Flight distance : 296427 ft
  • >>>
United Kingdom
Offline

Hi Jackson,

Thanks for the reply and suggestions. The screen works perfectly fine on 50 ghz and again when we switch between the two it somtimes comes on - odd. I've set it up at Cinema mode for 4k filming and have both a new pair of goggles and screen on, the IOSD comes up however the image is just white on both.

Dan


2015-1-27
Use props
DJI-Jackson
lvl.3
Flight distance : 51243 ft
  • >>>
China
Offline

Elevate Posted at 2015-1-27 22:21
Hi Jackson,

Thanks for the reply and suggestions. The screen works perfectly fine on 50 ghz and aga ...

Hi, Elevate.

I confirm this problem with our engineer and I was told that GH4 can only support 4K in 50Hz but 4K in cinema mode ,because the resolution ratio of 4K in cinema mode is higher than 4K in 50Hz.
2015-1-28
Use props
DJI-Jackson
lvl.3
Flight distance : 51243 ft
  • >>>
China
Offline

Elevate Posted at 2015-1-27 22:21
Hi Jackson,

Thanks for the reply and suggestions. The screen works perfectly fine on 50 ghz and aga ...

And I'm sorry about that.
2015-1-28
Use props
Elevate
lvl.4
Flight distance : 296427 ft
  • >>>
United Kingdom
Offline

DJI-Jackson Posted at 2015-1-28 20:02
Hi, Elevate.

I confirm this problem with our engineer and I was told that GH4 can only support 4K ...

Hi Jackson,

Yes, we are fully aware of this, hence why we are wanting to film in cinema mode to achieve true 4k resolution.

The issue we are having is that when we power up the s900 and GH4 combo that we just get a white screen - shown above (when in the cinema GHz)

Thanks
2015-1-28
Use props
t.callander91.g
New

United Kingdom
Offline

Elevate Posted at 2015-1-29 00:48
Hi Jackson,

Yes, we are fully aware of this, hence why we are wanting to film in cinema mode to  ...

Elevate

Did you ever get to the bottom of the white screen issue with your S900?

I have recently bought a S900 and I only get live video out my black pearl monitor very occasionally.

Any thoughts?

Thanks,
Tom
2015-5-19
Use props
Elevate
lvl.4
Flight distance : 296427 ft
  • >>>
United Kingdom
Offline

t.callander91.g Posted at 2015-5-20 01:56
Elevate

Did you ever get to the bottom of the white screen issue with your S900?

Nah we didn't, no-one could offer the advice needed. We can only shoot in 3800 res rather than true 4k, give that a go and let me know how you get on?

2015-5-21
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules