Hello all -

Hoping someone on here knows what to do and can solve this issue fast!

I have an Inspire v1 that was gifted to me shortly after release.  Everything worked great. I had to moth ball it for about 4 months due to life circumstances.  I recently was able to free up time and was planning on flying again.  In preparation to fly, I double checked the  craft and everything was working great, with the exception that the DJI Go app kept on bugging me about updating the firmware.  So I finally gave in and did the update.  Now, I have NO video feed.  Checking the version information in the Go app shows that everything updated correctly.  The Go app shows that I have "No Signal" in red at the center top of the app.  During the update through the Go app, I saw the video feed flicker a couple of times and then it went blank.  What can I do to resolve this issue?
The issue does not appear to be with the camera itself.  Turning on the histogram, I am able to see the graph move as I move the craft to look at different things.  This suggests that the camera is not the problem since the histogram is telling me that the camera is receiving images.  This also suggests that the craft itself is not the issue.  These two things together suggests that the latest firmware somehow broke the lightbridge on the craft.  If this is the case and because it was gifted to me, does this mean that I am SOL or will DJI fix this issue since it was a firmware update that caused this issue?

      

You stated that you saw the video flicker on the Ipad during the Update ???  I hope you had the Transmitter off while you updated the aircraft---   ***Important***

I assumed you updated this aircraft before correct, and know the procedure?
What version was on the craft when you updated?   I know you are supposed to do a sequential update in most cases.   YOU CANT GO FROM 1.2 TO 1.6 BUT YOU CAN GO 1.3 TO 1.6 .(  i ALWAYS PLY IT SAFE AND GO IN ORDER !)
  If you did the Updated correctley then Why not try and start with deleting  the go App and then Re- installing.  Also check the cable from the Transmitter to i pad.   This is very simple and is what I would do first.  IF you did the update correctly....


   

-donnie

     I am hoping you did the update like this, if not please let us know.  I hope this helps

-donnie

Yes, I've done the update before, but you are correct that I had my controller on.  Also I was unaware that I had to do sequential updates so I jumped an update or two.  How can I resolve my problem?  I've already done the suggested get rid of the Go app, and used several different connecting cables for my iPad.  I've also done the suggested reformatting of the SD card and trying the update again (repeatedly).  I've even tried to roll back to earlier versions but it still doesn't help.  Anything else I can do?

Here's the WM610_FW_RESULT_AB file info:


========== 2014.01.01 00:00:05 remo-con disconnect======
Packet: WM610_FW_V01.03.00.00.bin
Upgrading ...
Result: Success.

========== 2014.01.01 00:00:04 remo-con disconnect======
Packet: WM610_FW_V01.03.00.00.bin
Upgrading ...
Result: Success.

========== 2014.01.01 00:00:04 remo-con disconnect======
Packet: WM610_FW_V01.03.00.00.bin
Upgrading ...
Result: Success.

========== 2014.01.01 00:00:04 remo-con disconnect======
Packet: WM610_FW_V01.03.00.00.bin
Upgrading ...
Result: Success.

========== 2015.10.24 11:47:29 =====================
Packet: WM610_FW_V01.04.00.10.bin
Upgrading ...

========== 2015.10.24 11:51:15 =====================
Packet: WM610_FW_V01.04.00.10.bin
Upgrading ...

========== 2015.10.24 11:55:59 =====================
Packet: WM610_FW_V01.04.00.10.bin
Upgrading ...
Result: Success.

========== 2015.10.24 12:34:22 =====================
Packet: WM610_FW_V01.04.00.10.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

========== 2015.10.24 12:37:03 =====================
Packet: WM610_FW_V01.04.00.10.bin
Upgrading ...
Result: Success.

========== 2015.10.24 12:43:52 =====================
Packet: WM610_FW_V01.04.00.10.bin
Upgrading ...
Result: Success.

========== 2015.10.24 12:53:19 =====================
Packet: WM610_FW_V01.04.00.10.bin
Upgrading ...
Result: Success.

========== 2016.02.26 14:12:17 =====================
Packet: WM610_FW_V01.06.00.40.bin
Upgrading ...

========== 2014.01.01 00:00:07 remo-con disconnect======
Packet: WM610_FW_V01.06.00.40.bin
Upgrading ...
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2016.02.26 15:13:37 =====================
Packet: WM610_FW_V01.06.00.40.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:00:06 remo-con disconnect======
Packet: WM610_FW_V01.06.00.40.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:00:06 remo-con disconnect======
Packet: WM610_FW_V01.06.00.40.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:00:07 remo-con disconnect======
Packet: WM610_FW_V01.06.00.40.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:00:06 remo-con disconnect======
Packet: WM610_FW_V01.06.00.40.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2016.02.27 01:52:46 =====================
Packet: WM610_FW_V01.06.00.40.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:00:06 remo-con disconnect======
Packet: WM610_FW_V01.03.00.00.bin
Upgrading ...
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:00:06 remo-con disconnect======
Packet: WM610_FW_V01.05.00.30.bin
Upgrading ...
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:00:06 remo-con disconnect======
Packet: WM610_FW_V01.06.00.40.bin
Upgrading ...
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:00:07 remo-con disconnect======
Packet: WM610_FW_V01.06.00.40.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:00:07 remo-con disconnect======
Packet: WM610_FW_V01.06.00.40.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:00:07 remo-con disconnect======
Packet: WM610_FW_V01.06.00.40.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:00:07 remo-con disconnect======
Packet: WM610_FW_V01.06.00.40.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:00:07 remo-con disconnect======
Packet: WM610_FW_V01.06.00.40.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2016.02.27 03:33:41 =====================
Packet: WM610_FW_V01.06.00.40.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:00:07 remo-con disconnect======
Packet: WM610_FW_V01.06.00.40.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:00:07 remo-con disconnect======
Packet: WM610_FW_V01.06.00.40.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:00:06 remo-con disconnect======
Packet: WM610_FW_V01.06.00.40.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:00:07 remo-con disconnect======
Packet: WM610_FW_V01.06.00.40.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2016.02.27 11:22:11 =====================
Packet: WM610_FW_V01.06.00.40.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:00:06 remo-con disconnect======
Packet: WM610_FW_V01.06.00.40.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

(Ok you have to roll back in the proper order.)  never mind that for now ,  What Update do you have right now updated succesfully on the aircraft   ?   Then try to update with a fresh SD card and Fresh FIRMWARE  download of  the NEXT in order firmware.  ( Moving up the list )  Make sure NOTHING on the sd card but the BIN file of the next Firmware.  Transmitter off.  Make SURE WHEN YOU LOAD THE SD CARD THE  AIRCRAFT IS OFF THEN WITH THE SD CARD LOADED WITH THE POPER IN ORDER FIRMWARE TURN  THE AIRCRAFT ON.    give it about 25 min or until you hear d-dd   d-dd  d-dd  d-dd .  if you hear dddddddddddddddd we have a problem.


Did you Update your RC as well ? the most current in Feb 2016 is 1.5.70

1.6..0.40   LATEST
1.5.0.30
1.3.0.00
1.4  -OLDEST Not available as far as I know.  You should not havve to rollback this far anyway.
Try this. Make sure you do it like the video above.  Just in the next logical order until  we get to 1.6.0.40

cheers -donnie

ok. one huge problem is the last one that was successfully updated was 1.2 and i can not locate 1.4.  I have the other three since they are still available on DJI's website.  i am pretty sure we have a problem since no matter which version i put in, the craft updates for a little and then does the ddddddddddddddddddddd.....

with exception to the 1.4 update, i've sequentially updated the craft. each firmware ends up with the dreaded steady ddddddddddddddd sound. and i've started to notice that the logs now show that the bin file is corrupted even though it's a fresh download from DJI's website.  so there is no way to get back to "factory default" to start over again?

here's the log for 1.6.0.40:


========== 2014.01.01 00:00:05 remo-con disconnect======
Packet: WM610_FW_V01.03.00.00.bin
Upgrading ...
Result: Success.

========== 2014.01.01 00:00:04 remo-con disconnect======
Packet: WM610_FW_V01.03.00.00.bin
Upgrading ...
Result: Success.

========== 2014.01.01 00:00:04 remo-con disconnect======
Packet: WM610_FW_V01.03.00.00.bin
Upgrading ...
Result: Success.

========== 2014.01.01 00:00:04 remo-con disconnect======
Packet: WM610_FW_V01.03.00.00.bin
Upgrading ...
Result: Success.

========== 2015.10.24 11:47:29 =====================
Packet: WM610_FW_V01.04.00.10.bin
Upgrading ...

========== 2015.10.24 11:51:15 =====================
Packet: WM610_FW_V01.04.00.10.bin
Upgrading ...

========== 2015.10.24 11:55:59 =====================
Packet: WM610_FW_V01.04.00.10.bin
Upgrading ...
Result: Success.

========== 2015.10.24 12:34:22 =====================
Packet: WM610_FW_V01.04.00.10.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

========== 2015.10.24 12:37:03 =====================
Packet: WM610_FW_V01.04.00.10.bin
Upgrading ...
Result: Success.

========== 2015.10.24 12:43:52 =====================
Packet: WM610_FW_V01.04.00.10.bin
Upgrading ...
Result: Success.

========== 2015.10.24 12:53:19 =====================
Packet: WM610_FW_V01.04.00.10.bin
Upgrading ...
Result: Success.

========== 2016.02.26 14:12:17 =====================
Packet: WM610_FW_V01.06.00.40.bin
Upgrading ...

========== 2014.01.01 00:00:07 remo-con disconnect======
Packet: WM610_FW_V01.06.00.40.bin
Upgrading ...
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2016.02.26 15:13:37 =====================
Packet: WM610_FW_V01.06.00.40.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:00:06 remo-con disconnect======
Packet: WM610_FW_V01.06.00.40.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:00:06 remo-con disconnect======
Packet: WM610_FW_V01.06.00.40.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:00:07 remo-con disconnect======
Packet: WM610_FW_V01.06.00.40.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:00:06 remo-con disconnect======
Packet: WM610_FW_V01.06.00.40.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2016.02.27 01:52:46 =====================
Packet: WM610_FW_V01.06.00.40.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:00:06 remo-con disconnect======
Packet: WM610_FW_V01.03.00.00.bin
Upgrading ...
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:00:06 remo-con disconnect======
Packet: WM610_FW_V01.05.00.30.bin
Upgrading ...
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:00:06 remo-con disconnect======
Packet: WM610_FW_V01.06.00.40.bin
Upgrading ...
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:00:07 remo-con disconnect======
Packet: WM610_FW_V01.06.00.40.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:00:07 remo-con disconnect======
Packet: WM610_FW_V01.06.00.40.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:00:07 remo-con disconnect======
Packet: WM610_FW_V01.06.00.40.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:00:07 remo-con disconnect======
Packet: WM610_FW_V01.06.00.40.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:00:07 remo-con disconnect======
Packet: WM610_FW_V01.06.00.40.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2016.02.27 03:33:41 =====================
Packet: WM610_FW_V01.06.00.40.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:00:07 remo-con disconnect======
Packet: WM610_FW_V01.06.00.40.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:00:07 remo-con disconnect======
Packet: WM610_FW_V01.06.00.40.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:00:06 remo-con disconnect======
Packet: WM610_FW_V01.06.00.40.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:00:07 remo-con disconnect======
Packet: WM610_FW_V01.06.00.40.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2016.02.27 11:22:11 =====================
Packet: WM610_FW_V01.06.00.40.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:00:06 remo-con disconnect======
Packet: WM610_FW_V01.06.00.40.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:00:06 remo-con disconnect======
Packet: WM610_FW_V01.02.01.03.bin
Result: Corrupted.
Firmware bin file is corrupted, download it again from the DJI offical website.

========== 2014.01.01 00:00:07 remo-con disconnect======
Packet: WM610_FW_V01.02.01.03.bin
Result: Corrupted.
Firmware bin file is corrupted, download it again from the DJI offical website.

========== 2014.01.01 00:00:06 remo-con disconnect======
Packet: WM610_FW_V01.03.00.00.bin
Upgrading ...
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:00:06 remo-con disconnect======
Packet: WM610_FW_V01.05.00.30.bin
Upgrading ...
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:00:06 remo-con disconnect======
Packet: WM610_FW_V01.06.00.40.bin
Upgrading ...
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:00:06 remo-con disconnect======
Packet: WM610_FW_V01.06.00.40.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:00:06 remo-con disconnect======
Packet: WM610_FW_V01.02.01.03.bin
Result: Corrupted.
Firmware bin file is corrupted, download it again from the DJI offical website.

========== 2014.01.01 00:00:06 remo-con disconnect======
Packet: WM610_FW_V01.06.00.40.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

You have not succefully dowloaded the firmware if it ends in dddddddddddddddddddddddd .   You cant keep updating if the previous firmware failed. You are not actually updating.
  

It looks to me like you never really updated to 1.6.0.40  I think you are still at 1.4.  
***Only update with fresh downloads from DJI also.



****You need to  turn on the aircraft and turn on the transmitter and the go app ( Like you are going to fly ) and look on the" about tab" on the go app and WRITE DOWN WHICH FIRMWARE IS SUCCESFULLY CURRENT ON YOUR SYSTEM.  The aircraft.....The RC...... Go App....  THIS IS CRITICAL INFORMATION TO MOVE FORWARD.
Most up to date Firmware Below
Aircraft 1.600.40
RC    1.5.70
Go app  2.6.0

What does your say ?


Let us know Monday if you can - donnie

Heya -

The App shows the following under the About scrren:

App          Version 2.6.0
Aircrarft     Version 1.6.00.40
RC            Version 1.5.70
Camera      Version 1.5.00.30


To the right of the "No Signal" in red, it shows that BOTH the RC and HD Image is at FULL five bars.  The App also shows the "No SD Card" message right underneath the HD signal indicator when there is no SD card in the camera.  Finally as originally stated, the histogram shows that the camera is receiving images. In fact, I am still getting the ISO, F stop, EV, and JPEG count from the craft in camera mode.  Likewise I am getting the ISO, F stop, EV, video setting, and record time left from the craft in video recording mode.  The Camera records fine (still able to record from the app onto the SD then view the image and video clip on my computer).  However, despite all of this, I am still not getting any video signals from the craft itself.

Any other ideas?

Thanks - trung

tbui_stan.yahoo Posted at 2016-3-1 07:55
Heya -

The App shows the following under the About scrren:

You can try this combo:
Press the C1 + C2 + Trigger (photo) buttons and keep them pressed and TURN OFF the controller.
By still keeping pressed the C1 + C2 + Trigger (photo) buttons TURN ON the controller.

tbui_stan.yahoo Posted at 2016-2-29 15:55
Heya -

The App shows the following under the About scrren:

three things to try
1] Take the SD card out and try another chip... or just reseat the one you have.
2] uninstall the DJI Go App reboot and then reinstall it
3} Remote reset procedure press the C1+C2 +trigger buttons at the same time and turn on the remote.

Hope that one of these will fix the problem  

Rich

tbui_stan.yahoo Posted at 2016-3-1 07:55
Heya -

The App shows the following under the About scrren:

Can you post the hidden log files. If you've reformatted the SD card then reattempt 1.6 then post the hidden log file.
Everything is updated, we just need to see the hidden log to see if any of the modules are corrupted.

DJI-Tim Posted at 2016-2-29 20:00
You can try this combo:
Press the C1 + C2 + Trigger (photo) buttons and keep them pressed and TURN ...

sorry, No Joy.

RichJ53 Posted at 2016-2-29 20:39
three things to try
1] Take the SD card out and try another chip... or just reseat the one you hav ...

Hi Rich,

I've tried all of that and still no joy.

the following is the hidden log file. sorry, don't know how to upload it as a text file so have to copy and paste......


[00006757]========== remo-con disconnect. boot(15) ============
[00006901]Packet [C:\WM610_FW_V01.03.00.00.bin] detected, card sn [0x1890ed54].
[00006948]Packet upgrade start...

[00006994]Packet checking...
[00007026]Packet vlink 01.03.0000 <-> 01.02.0000.
[00007094]Done.

[00007138]Version checking[1]...
[00007179][01 00][00] v1.19.3422 -> v1.19.3422
[00007221][01 01][00] v0.0.0 -> v1.19.3422 need upgrade
[00007303][03 05][00] v34.1.0.5 -> v34.1.0.5
[00007383][03 06][00] v1.15.4.9 -> v2.2.6.33 need upgrade.
[00007434][04 00][00] v1.5.0.61 -> v1.26.0.3 need upgrade.
[00007503][05 00][00] v2.3.6.0 -> v3.0.6.1 need upgrade.
[00007562][08 00][00] v1.10.0.14 -> v1.14.0.25 need upgrade.
[00007617][09 00][00] v1.6.6.1 -> v1.8.0.0 need upgrade.
[00007682][11 00][00] v3.0.0.11 -> v3.7.15.9 need upgrade.
[00007782][12 00][00] v1.3.0.60 -> v1.8.0.0 need upgrade.
[00007882][12 01][00] v1.3.0.60 -> v1.8.0.0 need upgrade.
[00007982][12 02][00] v1.3.0.60 -> v1.8.0.0 need upgrade.
[00008085][12 03][00] v1.3.0.60 -> v1.8.0.0 need upgrade.
[00008189][15 00][00] v1.1.1.0 -> v1.1.2.0 need upgrade.
[00008242][17 00][00] v1.0.2.4 -> v1.1.0.4 need upgrade.
[00010841][17 01][00] v1.0.0.9 -> v2.0.0.8 need upgrade.
[00010887][19 00][00] v1.0.8.59 -> v1.0.8.96 need upgrade.
[00010925]Done.

[00012957]Waiting for user confirm...
[00022989]Timeout, start upgrade automatically.

[00023052]Firmware upgrading[1]...
[00023218][01 01] Firmware upgrade start...
[00053507][01 01] Firmware upgrade finished successfully.
[00054562][08 00] Firmware upgrade start...
[00385082][08 00] Firmware upgrade finished successfully.
[00385140][12 00] Firmware upgrade start...
[00441646][12 00] Firmware upgrade finished successfully.
[00441700][12 01] Firmware upgrade start...
[00497162][12 01] Firmware upgrade finished successfully.
[00497214][12 02] Firmware upgrade start...
[00552877][12 02] Firmware upgrade finished successfully.
[00552930][12 03] Firmware upgrade start...
[00608353][12 03] Firmware upgrade finished successfully.
[00608718][03 06] Firmware upgrade start...
[00837875][03 06] Firmware upgrade finished successfully.
[00837945][17 00] Firmware upgrade start...
[00899210][17 00] Firmware upgrade finished successfully.
[00899257][17 01] Firmware upgrade start...
[00953666][17 01] Firmware upgrade finished successfully.
[00953727][11 00] Firmware upgrade start...
[01035179][11 00] Firmware upgrade finished successfully.
[01035239][05 00] Firmware upgrade start...
[01079320][05 00] Firmware upgrade finished successfully.
[01079361][15 00] Firmware upgrade start...
[01117442][15 00] Firmware upgrade finished successfully.
[01121054][19 00] Firmware upgrade start...
[01286449][19 00] Firmware upgrade finished successfully.
[01286530][09 00] Firmware upgrade start...
[01337022][09 00] Firmware upgrade finished successfully.
[01337099][04 00] Firmware upgrade start...
[01400635][04 00] Firmware upgrade finished successfully.
[01400681]Done.

[01400720]Version checking[2]...
[01400756][01 00][00] v1.19.3422 -> v1.19.3422
[01400793][01 01][05] v1.19.3422 -> v1.19.3422
[01400873][03 05][00] v34.1.0.5 -> v34.1.0.5
[01400977][03 06][05] v2.2.6.33 -> v2.2.6.33
[01401032][04 00][05] v1.26.0.3 -> v1.26.0.3
[01401094][05 00][05] v3.0.6.1 -> v3.0.6.1
[01401142][08 00][05] v1.14.0.25 -> v1.14.0.25
[01401193][09 00][05] v1.8.0.0 -> v1.8.0.0
[01401253][11 00][05] v3.7.15.9 -> v3.7.15.9
[01401353][12 00][05] v1.8.0.0 -> v1.8.0.0
[01401434][12 01][05] v1.8.0.0 -> v1.8.0.0
[01401513][12 02][05] v1.8.0.0 -> v1.8.0.0
[01401593][12 03][05] v1.8.0.0 -> v1.8.0.0
[01401690][15 00][05] v1.1.2.0 -> v1.1.2.0
[01401754][17 00][05] v1.1.0.4 -> v1.1.0.4
[01401854][17 01][05] v2.0.0.8 -> v2.0.0.8
[01401897][19 00][05] v1.0.8.96 -> v1.0.8.96
[01401938]Packet upgrade finish successfully.



[00004775]========== remo-con disconnect. boot(15) ============
[00004819]Packet [C:\WM610_FW_V01.03.00.00.bin] detected, card sn [0x1890ed54].
[00004941]Packet upgrade start...

[00005006]Packet checking...
[00005058]Packet vlink 01.03.0000 <-> 01.02.0000.
[00005120]Record vlink 01.03.0000 <-> 01.02.0000 (flow = 0).
[00005173]Done.

[00005230]Version checking[1]...
[00005284][01 00][00] v1.19.3422 -> v1.19.3422
[00005346][01 01][00] v1.19.3422 -> v1.19.3422
[00005445][03 05][00] v34.1.0.5 -> v34.1.0.5
[00005525][03 06][00] v2.2.6.33 -> v2.2.6.33
[00005575][04 00][00] v1.26.0.3 -> v1.26.0.3
[00005645][05 00][00] v3.0.6.1 -> v3.0.6.1
[00005695][08 00][00] v1.14.0.25 -> v1.14.0.25
[00005755][09 00][00] v1.8.0.0 -> v1.8.0.0
[00005845][11 00][00] v3.0.0.11 -> v3.7.15.9 need upgrade.
[00005945][12 00][00] v1.8.0.0 -> v1.8.0.0
[00006045][12 01][00] v1.8.0.0 -> v1.8.0.0
[00006145][12 02][00] v1.8.0.0 -> v1.8.0.0
[00006244][12 03][00] v1.8.0.0 -> v1.8.0.0
[00006328][15 00][00] v1.1.2.0 -> v1.1.2.0
[00006385][17 00][00] v1.1.0.4 -> v1.1.0.4
[00006485][17 01][00] v2.0.0.8 -> v2.0.0.8
[00006560][19 00][00] v1.0.8.96 -> v1.0.8.96
[00006608]Done.

[00008652]Waiting for user confirm...
[00018691]Timeout, start upgrade automatically.

[00018771]Firmware upgrading[1]...
[00018830][11 00] Firmware upgrade start...
[00099741][11 00] Firmware upgrade finished successfully.
[00099776]Done.

[00099808]Version checking[2]...
[00099841][01 00][00] v1.19.3422 -> v1.19.3422
[00099880][01 01][00] v1.19.3422 -> v1.19.3422
[00099964][03 05][00] v34.1.0.5 -> v34.1.0.5
[00100038][03 06][00] v2.2.6.33 -> v2.2.6.33
[00100078][04 00][00] v1.26.0.3 -> v1.26.0.3
[00100138][05 00][00] v3.0.6.1 -> v3.0.6.1
[00100180][08 00][00] v1.14.0.25 -> v1.14.0.25
[00100232][09 00][00] v1.8.0.0 -> v1.8.0.0
[00100317][11 00][05] v3.7.15.9 -> v3.7.15.9
[00100398][12 00][00] v1.8.0.0 -> v1.8.0.0
[00100478][12 01][00] v1.8.0.0 -> v1.8.0.0
[00100598][12 02][00] v1.8.0.0 -> v1.8.0.0
[00100701][12 03][00] v1.8.0.0 -> v1.8.0.0
[00100805][15 00][00] v1.1.2.0 -> v1.1.2.0
[00100858][17 00][00] v1.1.0.4 -> v1.1.0.4
[00101057][17 01][00] v2.0.0.8 -> v2.0.0.8
[00101102][19 00][00] v1.0.8.96 -> v1.0.8.96
[00101138]Packet upgrade finish successfully.



[00004642]========== remo-con disconnect. boot(15) ============
[00004678]Packet [C:\WM610_FW_V01.03.00.00.bin] detected, card sn [0x1890ed54].
[00004720]Packet upgrade start...

[00004759]Packet checking...
[00004796]Packet vlink 01.03.0000 <-> 01.02.0000.
[00004837]Record vlink 01.03.0000 <-> 01.02.0000 (flow = 0).
[00004886]Done.

[00004945]Version checking[1]...
[00004995][01 00][00] v1.19.3422 -> v1.19.3422
[00005051][01 01][00] v1.19.3422 -> v1.19.3422
[00005145][03 05][00] v34.1.0.5 -> v34.1.0.5
[00005225][03 06][00] v2.2.6.33 -> v2.2.6.33
[00005269][04 00][00] v1.26.0.3 -> v1.26.0.3
[00005325][05 00][00] v3.0.6.1 -> v3.0.6.1
[00005383][08 00][00] v1.14.0.25 -> v1.14.0.25
[00005464][09 00][00] v1.8.0.0 -> v1.8.0.0
[00005524][11 00][00] v3.7.0.0 -> v3.7.15.9 need upgrade.
[00005624][12 00][00] v1.8.0.0 -> v1.8.0.0
[00005724][12 01][00] v1.8.0.0 -> v1.8.0.0
[00005824][12 02][00] v1.8.0.0 -> v1.8.0.0
[00005924][12 03][00] v1.8.0.0 -> v1.8.0.0
[00006014][15 00][00] v1.1.2.0 -> v1.1.2.0
[00011063][17 00][00] v1.1.0.4 -> v1.1.0.4
[00011163][17 01][00] v2.0.0.8 -> v2.0.0.8
[00011213][19 00][00] v1.0.8.96 -> v1.0.8.96
[00011249]Done.

[00013284]Waiting for user confirm...
[00023319]Timeout, start upgrade automatically.

[00023392]Firmware upgrading[1]...
[00023439][11 00] Firmware upgrade start...
[00104454][11 00] Firmware upgrade finished successfully.
[00104490]Done.

[00104525]Version checking[2]...
[00104561][01 00][00] v1.19.3422 -> v1.19.3422
[00104595][01 01][00] v1.19.3422 -> v1.19.3422
[00104677][03 05][00] v34.1.0.5 -> v34.1.0.5
[00104756][03 06][00] v2.2.6.33 -> v2.2.6.33
[00104802][04 00][00] v1.26.0.3 -> v1.26.0.3
[00104876][05 00][00] v3.0.6.1 -> v3.0.6.1
[00104930][08 00][00] v1.14.0.25 -> v1.14.0.25
[00104981][09 00][00] v1.8.0.0 -> v1.8.0.0
[00105056][11 00][05] v3.7.15.9 -> v3.7.15.9
[00105216][12 00][00] v1.8.0.0 -> v1.8.0.0
[00105296][12 01][00] v1.8.0.0 -> v1.8.0.0
[00105376][12 02][00] v1.8.0.0 -> v1.8.0.0
[00105496][12 03][00] v1.8.0.0 -> v1.8.0.0
[00105591][15 00][00] v1.1.2.0 -> v1.1.2.0
[00105656][17 00][00] v1.1.0.4 -> v1.1.0.4
[00105756][17 01][00] v2.0.0.8 -> v2.0.0.8
[00105806][19 00][00] v1.0.8.96 -> v1.0.8.96
[00105843]Packet upgrade finish successfully.



[00004645]========== remo-con disconnect. boot(15) ============
[00004681]Packet [C:\WM610_FW_V01.03.00.00.bin] detected, card sn [0x1890ed54].
[00004719]Packet upgrade start...

[00004759]Packet checking...
[00004797]Packet vlink 01.03.0000 <-> 01.02.0000.
[00004837]Record vlink 01.03.0000 <-> 01.02.0000 (flow = 0).
[00004883]Done.

[00004942]Version checking[1]...
[00004990][01 00][00] v1.19.3422 -> v1.19.3422
[00005049][01 01][00] v1.19.3422 -> v1.19.3422
[00005139][03 05][00] v34.1.0.5 -> v34.1.0.5
[00005218][03 06][00] v2.2.6.33 -> v2.2.6.33
[00005268][04 00][00] v1.26.0.3 -> v1.26.0.3
[00005338][05 00][00] v3.0.6.1 -> v3.0.6.1
[00005390][08 00][00] v1.14.0.25 -> v1.14.0.25
[00005473][09 00][00] v1.8.0.0 -> v1.8.0.0
[00005559][11 00][00] v3.0.0.11 -> v3.7.15.9 need upgrade.
[00005678][12 00][00] v1.8.0.0 -> v1.8.0.0
[00005778][12 01][00] v1.8.0.0 -> v1.8.0.0
[00005898][12 02][00] v1.8.0.0 -> v1.8.0.0
[00005998][12 03][00] v1.8.0.0 -> v1.8.0.0
[00006103][15 00][00] v1.1.2.0 -> v1.1.2.0
[00006157][17 00][00] v1.1.0.4 -> v1.1.0.4
[00011257][17 01][00] v2.0.0.8 -> v2.0.0.8
[00011302][19 00][00] v1.0.8.96 -> v1.0.8.96
[00011336]Done.

[00013373]Waiting for user confirm...
[00023409]Timeout, start upgrade automatically.

[00023480]Firmware upgrading[1]...
[00023531][11 00] Firmware upgrade start...
[00104629][11 00] Firmware upgrade finished successfully.
[00104664]Done.

[00104700]Version checking[2]...
[00104736][01 00][00] v1.19.3422 -> v1.19.3422
[00104774][01 01][00] v1.19.3422 -> v1.19.3422
[00104850][03 05][00] v34.1.0.5 -> v34.1.0.5
[00105011][03 06][00] v2.2.6.33 -> v2.2.6.33
[00105053][04 00][00] v1.26.0.3 -> v1.26.0.3
[00105110][05 00][00] v3.0.6.1 -> v3.0.6.1
[00105154][08 00][00] v1.14.0.25 -> v1.14.0.25
[00105201][09 00][00] v1.8.0.0 -> v1.8.0.0
[00105272][11 00][05] v3.7.15.9 -> v3.7.15.9
[00105350][12 00][00] v1.8.0.0 -> v1.8.0.0
[00105430][12 01][00] v1.8.0.0 -> v1.8.0.0
[00105530][12 02][00] v1.8.0.0 -> v1.8.0.0
[00105611][12 03][00] v1.8.0.0 -> v1.8.0.0
[00105698][15 00][00] v1.1.2.0 -> v1.1.2.0
[00105773][17 00][00] v1.1.0.4 -> v1.1.0.4
[00105869][17 01][00] v2.0.0.8 -> v2.0.0.8
[00105914][19 00][00] v1.0.8.96 -> v1.0.8.96
[00105953]Packet upgrade finish successfully.



[00005804]========== 2015.10.24 11:47:30. boot(15) ============
[00005867]Packet [C:\WM610_FW_V01.04.00.10.bin] detected, card sn [0x1890ed54].
[00005925]Packet upgrade start...

[00006002]Packet checking...
[00006067]Packet vlink 01.04.0010 <-> 01.03.0000.
[00006125]Record vlink 01.03.0000 <-> 01.02.0000 (flow = 0).
[00006184]Done.

[00006228]Version checking[1]...
[00006280][01 00][00] v1.19.3422 -> v1.19.3422
[00006344][01 01][00] v1.19.3422 -> v1.19.3422
[00006437][03 05][00] v34.1.0.5 -> v34.1.0.5
[00006517][03 06][00] v2.2.6.33 -> v2.3.0.13 need upgrade.
[00006590][04 00][00] v1.26.0.3 -> v1.26.0.21 need upgrade.
[00006677][05 00][00] v3.0.6.1 -> v3.0.6.1
[00006781][08 00][00] v1.14.0.25 -> v1.14.0.25
[00006846][09 00][00] v1.8.0.0 -> v1.8.0.0
[00006936][11 00][00] v3.7.15.9 -> v3.7.15.10 need upgrade.
[00007036][12 00][00] v1.8.0.0 -> v1.8.0.0
[00007136][12 01][00] v1.8.0.0 -> v1.8.0.0
[00007236][12 02][00] v1.8.0.0 -> v1.8.0.0
[00007336][12 03][00] v1.8.0.0 -> v1.8.0.0
[00007472][15 00][00] v1.1.2.0 -> v1.1.2.0
[00007556][17 00][00] v1.1.0.4 -> v1.1.0.4
[00007676][17 01][00] v2.0.0.8 -> v2.0.0.8
[00007816][19 00][00] v1.0.8.96 -> v1.0.8.96
[00007881]Done.

[00009924]Waiting for user confirm...
[00019976]Timeout, start upgrade automatically.

[00020142]Firmware upgrading[1]...
[00020405][03 06] Firmware upgrade start...
[00007902]========== 2015.10.24 11:51:16. boot(15) ============
[00007957]Packet [C:\WM610_FW_V01.04.00.10.bin] detected, card sn [0x1890ed54].
[00008022]Packet upgrade start...

[00008092]Packet checking...
[00008153]Packet vlink 01.04.0010 <-> 01.03.0000.
[00008216]Record vlink 01.03.0000 <-> 01.02.0000 (flow = 0).
[00008260]Done.

[00008328]Version checking[1]...
[00008389][01 00][00] v1.19.3422 -> v1.19.3422
[00008451][01 01][00] v1.19.3422 -> v1.19.3422
[00008554][03 05][00] v34.1.0.5 -> v34.1.0.5
[00008654][03 06][00] v1.0.0.1 -> v2.3.0.13 need upgrade.
[00008732][04 00][00] v1.26.0.3 -> v1.26.0.21 need upgrade.
[00008827][05 00][00] v3.0.6.1 -> v3.0.6.1
[00008899][08 00][00] v1.14.0.25 -> v1.14.0.25
[00008971][09 00][00] v1.8.0.0 -> v1.8.0.0
[00009054][11 00][00] v3.7.15.9 -> v3.7.15.10 need upgrade.
[00021647][12 00][00] device not detected.
[00034195][12 01][00] device not detected.
[00046740][12 02][00] device not detected.
[00059283][12 03][00] device not detected.
[00059402][15 00][00] v1.1.2.0 -> v1.1.2.0
[00059471][17 00][00] v1.1.0.4 -> v1.1.0.4
[00059591][17 01][00] v2.0.0.8 -> v2.0.0.8
[00059656][19 00][00] v1.0.8.96 -> v1.0.8.96
[00059705]Done.

[00061762]Waiting for user confirm...
[00071811]Timeout, start upgrade automatically.

[00071916]Firmware upgrading[1]...
[00072205][03 06] Firmware upgrade start...
[00005722]========== 2015.10.24 11:56:00. boot(15) ============
[00005783]Packet [C:\WM610_FW_V01.04.00.10.bin] detected, card sn [0x1890ed54].
[00005843]Packet upgrade start...

[00005911]Packet checking...
[00005978]Packet vlink 01.04.0010 <-> 01.03.0000.
[00006034]Record vlink 01.03.0000 <-> 01.02.0000 (flow = 0).
[00006078]Done.

[00006117]Version checking[1]...
[00006178][01 00][00] v1.19.3422 -> v1.19.3422
[00006235][01 01][00] v1.19.3422 -> v1.19.3422
[00006309][03 05][00] v34.1.0.5 -> v34.1.0.5
[00006409][03 06][00] v1.0.0.1 -> v2.3.0.13 need upgrade.
[00006636][04 00][00] v1.26.0.3 -> v1.26.0.21 need upgrade.
[00006709][05 00][00] v3.0.6.1 -> v3.0.6.1
[00006807][08 00][00] v1.14.0.25 -> v1.14.0.25
[00006869][09 00][00] v1.8.0.0 -> v1.8.0.0
[00006930][11 00][00] v3.7.15.9 -> v3.7.15.10 need upgrade.
[00019479][12 00][00] device not detected.
[00032021][12 01][00] device not detected.
[00044566][12 02][00] device not detected.
[00057118][12 03][00] device not detected.
[00057240][15 00][00] v1.1.2.0 -> v1.1.2.0
[00057305][17 00][00] v1.1.0.4 -> v1.1.0.4
[00057425][17 01][00] v2.0.0.8 -> v2.0.0.8
[00057475][19 00][00] v1.0.8.96 -> v1.0.8.96
[00057519]Done.

[00059558]Waiting for user confirm...
[00069597]Timeout, start upgrade automatically.

[00069682]Firmware upgrading[1]...
[00069954][03 06] Firmware upgrade start...
[00306266][03 06] Firmware upgrade finished successfully.
[00306320][11 00] Firmware upgrade start...
[00387399][11 00] Firmware upgrade finished successfully.
[00387495][04 00] Firmware upgrade start...
[00457230][04 00] Firmware upgrade finished successfully.
[00457272]Done.

[00457318]Version checking[2]...
[00457358][01 00][00] v1.19.3422 -> v1.19.3422
[00457396][01 01][00] v1.19.3422 -> v1.19.3422
[00457476][03 05][00] v34.1.0.5 -> v34.1.0.5
[00457555][03 06][05] v2.3.0.13 -> v2.3.0.13
[00457601][04 00][05] v1.26.0.21 -> v1.26.0.21
[00457675][05 00][00] v3.0.6.1 -> v3.0.6.1
[00457755][08 00][00] v1.14.0.25 -> v1.14.0.25
[00457805][09 00][00] v1.8.0.0 -> v1.8.0.0
[00457875][11 00][05] v3.7.15.10 -> v3.7.15.10
[00457995][12 00][00] v1.8.0.0 -> v1.8.0.0
[00458095][12 01][00] v1.8.0.0 -> v1.8.0.0
[00458195][12 02][00] v1.8.0.0 -> v1.8.0.0
[00458295][12 03][00] v1.8.0.0 -> v1.8.0.0
[00458419][15 00][00] v1.1.2.0 -> v1.1.2.0
[00458475][17 00][00] v1.1.0.4 -> v1.1.0.4
[00458594][17 01][00] v2.0.0.8 -> v2.0.0.8
[00458650][19 00][00] v1.0.8.96 -> v1.0.8.96
[00458690]Packet upgrade finish successfully.



[00007679]========== 2015.10.24 12:34:23. boot(15) ============
[00007885]Packet [C:\WM610_FW_V01.04.00.10.bin] detected, card sn [0x1890ed54].
[00007945]Packet upgrade start...

[00008004]Packet checking...
[00008051]Packet vlink 01.04.0010 <-> 01.03.0000.
[00008108]Record vlink 01.04.0010 <-> 01.03.0000 (flow = 0).
[00008156]Done.

[00008213]Version checking[1]...
[00008275][01 00][00] v1.19.3422 -> v1.19.3422
[00008335][01 01][00] v1.19.3422 -> v1.19.3422
[00008420][03 05][00] v34.1.0.5 -> v34.1.0.5
[00008500][03 06][00] v2.3.0.13 -> v2.3.0.13
[00008571][04 00][00] v1.26.0.21 -> v1.26.0.21
[00008660][05 00][00] v3.0.6.1 -> v3.0.6.1
[00008762][08 00][00] v1.14.0.25 -> v1.14.0.25
[00008881][09 00][00] v1.8.0.0 -> v1.8.0.0
[00008987][11 00][00] v3.7.15.10 -> v3.7.15.10
[00009100][12 00][00] v1.8.0.0 -> v1.8.0.0
[00009220][12 01][00] v1.8.0.0 -> v1.8.0.0
[00009320][12 02][00] v1.8.0.0 -> v1.8.0.0
[00009420][12 03][00] v1.8.0.0 -> v1.8.0.0
[00009559][15 00][00] v1.1.2.0 -> v1.1.2.0
[00009640][17 00][00] v1.1.0.4 -> v1.1.0.4
[00009840][17 01][00] v2.0.0.8 -> v2.0.0.8
[00009894][19 00][00] v1.0.8.96 -> v1.0.8.96
[00011936]Packet upgrade cancelled at version checking.



[00005765]========== 2015.10.24 12:37:04. boot(15) ============
[00005823]Packet [C:\WM610_FW_V01.04.00.10.bin] detected, card sn [0x1890ed54].
[00005887]Packet upgrade start...

[00005960]Packet checking...
[00006023]Packet vlink 01.04.0010 <-> 01.03.0000.
[00006087]Record vlink 01.04.0010 <-> 01.03.0000 (flow = 0).
[00006140]Done.

[00006178]Version checking[1]...
[00006236][01 00][00] v1.19.3422 -> v1.19.3422
[00006296][01 01][00] v1.19.3422 -> v1.19.3422
[00006396][03 05][00] v34.1.0.5 -> v34.1.0.5
[00006497][03 06][00] v2.3.0.13 -> v2.3.0.13
[00006575][04 00][00] v1.26.0.21 -> v1.26.0.21
[00006675][05 00][00] v3.0.6.1 -> v3.0.6.1
[00006771][08 00][00] v1.14.0.25 -> v1.14.0.25
[00006840][09 00][00] v1.8.0.0 -> v1.8.0.0
[00006914][11 00][00] v3.7.15.9 -> v3.7.15.10 need upgrade.
[00007097][12 00][00] v1.8.0.0 -> v1.8.0.0
[00007197][12 01][00] v1.8.0.0 -> v1.8.0.0
[00007294][12 02][00] v1.8.0.0 -> v1.8.0.0
[00007397][12 03][00] v1.8.0.0 -> v1.8.0.0
[00007511][15 00][00] v1.1.2.0 -> v1.1.2.0
[00007575][17 00][00] v1.1.0.4 -> v1.1.0.4
[00007694][17 01][00] v2.0.0.8 -> v2.0.0.8
[00007770][19 00][00] v1.0.8.96 -> v1.0.8.96
[00007815]Done.

[00009857]Waiting for user confirm...
[00019904]Timeout, start upgrade automatically.

[00019988]Firmware upgrading[1]...
[00020043][11 00] Firmware upgrade start...
[00101165][11 00] Firmware upgrade finished successfully.
[00101214]Done.

[00101258]Version checking[2]...
[00101301][01 00][00] v1.19.3422 -> v1.19.3422
[00101342][01 01][00] v1.19.3422 -> v1.19.3422
[00101427][03 05][00] v34.1.0.5 -> v34.1.0.5
[00101507][03 06][00] v2.3.0.13 -> v2.3.0.13
[00101564][04 00][00] v1.26.0.21 -> v1.26.0.21
[00101630][05 00][00] v3.0.6.1 -> v3.0.6.1
[00101676][08 00][00] v1.14.0.25 -> v1.14.0.25
[00101759][09 00][00] v1.8.0.0 -> v1.8.0.0
[00101827][11 00][05] v3.7.15.10 -> v3.7.15.10
[00101927][12 00][00] v1.8.0.0 -> v1.8.0.0
[00102027][12 01][00] v1.8.0.0 -> v1.8.0.0
[00102127][12 02][00] v1.8.0.0 -> v1.8.0.0
[00102227][12 03][00] v1.8.0.0 -> v1.8.0.0
[00102355][15 00][00] v1.1.2.0 -> v1.1.2.0
[00102427][17 00][00] v1.1.0.4 -> v1.1.0.4
[00102527][17 01][00] v2.0.0.8 -> v2.0.0.8
[00102576][19 00][00] v1.0.8.96 -> v1.0.8.96
[00102619]Packet upgrade finish successfully.



[00005785]========== 2015.10.24 12:43:53. boot(15) ============
[00005862]Packet [C:\WM610_FW_V01.04.00.10.bin] detected, card sn [0x1890ed54].
[00005923]Packet upgrade start...

[00005995]Packet checking...
[00006052]Packet vlink 01.04.0010 <-> 01.03.0000.
[00006095]Record vlink 01.04.0010 <-> 01.03.0000 (flow = 0).
[00006152]Done.

[00006216]Version checking[1]...
[00006274][01 00][00] v1.19.3422 -> v1.19.3422
[00006322][01 01][00] v1.19.3422 -> v1.19.3422
[00006414][03 05][00] v34.1.0.5 -> v34.1.0.5
[00006674][03 06][00] v2.3.0.13 -> v2.3.0.13
[00006772][04 00][00] v1.26.0.21 -> v1.26.0.21
[00006874][05 00][00] v3.0.6.1 -> v3.0.6.1
[00006930][08 00][00] v1.14.0.25 -> v1.14.0.25
[00006988][09 00][00] v1.8.0.0 -> v1.8.0.0
[00007073][11 00][00] v3.7.15.9 -> v3.7.15.10 need upgrade.
[00007173][12 00][00] v1.8.0.0 -> v1.8.0.0
[00007254][12 01][00] v1.8.0.0 -> v1.8.0.0
[00007333][12 02][00] v1.8.0.0 -> v1.8.0.0
[00007413][12 03][00] v1.8.0.0 -> v1.8.0.0
[00007534][15 00][00] v1.1.2.0 -> v1.1.2.0
[00007593][17 00][00] v1.1.0.4 -> v1.1.0.4
[00007713][17 01][00] v2.0.0.8 -> v2.0.0.8
[00007767][19 00][00] v1.0.8.96 -> v1.0.8.96
[00007812]Done.

[00009856]Waiting for user confirm...
[00019903]Timeout, start upgrade automatically.

[00019988]Firmware upgrading[1]...
[00020047][11 00] Firmware upgrade start...
[00101185][11 00] Firmware upgrade finished successfully.
[00101233]Done.

[00101273]Version checking[2]...
[00101315][01 00][00] v1.19.3422 -> v1.19.3422
[00101359][01 01][00] v1.19.3422 -> v1.19.3422
[00101426][03 05][00] v34.1.0.5 -> v34.1.0.5
[00101486][03 06][00] v2.3.0.13 -> v2.3.0.13
[00101544][04 00][00] v1.26.0.21 -> v1.26.0.21
[00101606][05 00][00] v3.0.6.1 -> v3.0.6.1
[00101666][08 00][00] v1.14.0.25 -> v1.14.0.25
[00101715][09 00][00] v1.8.0.0 -> v1.8.0.0
[00101786][11 00][05] v3.7.15.10 -> v3.7.15.10
[00101866][12 00][00] v1.8.0.0 -> v1.8.0.0
[00101946][12 01][00] v1.8.0.0 -> v1.8.0.0
[00102026][12 02][00] v1.8.0.0 -> v1.8.0.0
[00102126][12 03][00] v1.8.0.0 -> v1.8.0.0
[00102247][15 00][00] v1.1.2.0 -> v1.1.2.0
[00102306][17 00][00] v1.1.0.4 -> v1.1.0.4
[00102426][17 01][00] v2.0.0.8 -> v2.0.0.8
[00102479][19 00][00] v1.0.8.96 -> v1.0.8.96
[00102530]Packet upgrade finish successfully.



[00005806]========== 2015.10.24 12:53:20. boot(15) ============
[00005879]Packet [C:\WM610_FW_V01.04.00.10.bin] detected, card sn [0x1890ed54].
[00005951]Packet upgrade start...

[00006022]Packet checking...
[00006189]Packet vlink 01.04.0010 <-> 01.03.0000.
[00006261]Record vlink 01.04.0010 <-> 01.03.0000 (flow = 0).
[00006306]Done.

[00006371]Version checking[1]...
[00006441][01 00][00] v1.19.3422 -> v1.19.3422
[00006505][01 01][00] v1.19.3422 -> v1.19.3422
[00006607][03 05][00] v34.1.0.5 -> v34.1.0.5
[00006707][03 06][00] v2.3.0.13 -> v2.3.0.13
[00006795][04 00][00] v1.26.0.21 -> v1.26.0.21
[00006887][05 00][00] v3.0.6.1 -> v3.0.6.1
[00006954][08 00][00] v1.14.0.25 -> v1.14.0.25
[00007016][09 00][00] v1.8.0.0 -> v1.8.0.0
[00007086][11 00][00] v3.7.15.9 -> v3.7.15.10 need upgrade.
[00007188][12 00][00] v1.8.0.0 -> v1.8.0.0
[00007286][12 01][00] v1.8.0.0 -> v1.8.0.0
[00007386][12 02][00] v1.8.0.0 -> v1.8.0.0
[00007509][12 03][00] v1.8.0.0 -> v1.8.0.0
[00007647][15 00][00] v1.1.2.0 -> v1.1.2.0
[00007726][17 00][00] v1.1.0.4 -> v1.1.0.4
[00007847][17 01][00] v2.0.0.8 -> v2.0.0.8
[00007903][19 00][00] v1.0.8.96 -> v1.0.8.96
[00007953]Done.

[00010015]Waiting for user confirm...
[00020058]Timeout, start upgrade automatically.

[00020152]Firmware upgrading[1]...
[00020208][11 00] Firmware upgrade start...
[00101378][11 00] Firmware upgrade finished successfully.
[00101424]Done.

[00101468]Version checking[2]...
[00101512][01 00][00] v1.19.3422 -> v1.19.3422
[00101557][01 01][00] v1.19.3422 -> v1.19.3422
[00101619][03 05][00] v34.1.0.5 -> v34.1.0.5
[00101699][03 06][00] v2.3.0.13 -> v2.3.0.13
[00101777][04 00][00] v1.26.0.21 -> v1.26.0.21
[00101859][05 00][00] v3.0.6.1 -> v3.0.6.1
[00101916][08 00][00] v1.14.0.25 -> v1.14.0.25
[00101973][09 00][00] v1.8.0.0 -> v1.8.0.0
[00102059][11 00][05] v3.7.15.10 -> v3.7.15.10
[00102159][12 00][00] v1.8.0.0 -> v1.8.0.0
[00102239][12 01][00] v1.8.0.0 -> v1.8.0.0
[00102319][12 02][00] v1.8.0.0 -> v1.8.0.0
[00102419][12 03][00] v1.8.0.0 -> v1.8.0.0
[00102547][15 00][00] v1.1.2.0 -> v1.1.2.0
[00102620][17 00][00] v1.1.0.4 -> v1.1.0.4
[00102733][17 01][00] v2.0.0.8 -> v2.0.0.8
[00102788][19 00][00] v1.0.8.96 -> v1.0.8.96
[00102916]Packet upgrade finish successfully.



[00005236]========== 2016.02.26 14:12:17. boot(15) ============
[00005283]Packet [C:\WM610_FW_V01.06.00.40.bin] detected, card sn [0x1890ed54].
[00005340]Packet upgrade start...

[00005395]Packet checking...
[00005453]Packet vlink 01.06.0040 <-> 01.05.0030.
[00005499]Record vlink 01.04.0010 <-> 01.03.0000 (flow = 0).
[00005552]Done.

[00005600]Version checking[1]...
[00005672][01 00][00] v1.19.3422 -> v2.47.4492 need upgrade
[00005754][01 01][00] v1.19.3422 -> v2.47.4492 need upgrade
[00005870][03 05][00] v34.1.0.5 -> v34.1.0.5
[00005970][03 06][00] v2.3.0.13 -> v2.4.10.7 need upgrade.
[00006060][04 00][00] v1.26.0.21 -> v1.29.0.51 need upgrade.
[00006132][05 00][00] v3.0.6.1 -> v3.0.6.2 need upgrade.
[00006204][08 00][00] v1.14.0.25 -> v2.14.9.35 need upgrade.
[00006294][09 00][00] v1.8.0.0 -> v1.8.0.0
[00006393][11 00][00] v3.8.15.4 -> v3.8.15.4
[00006533][12 00][00] v1.8.0.0 -> v1.11.0.0 need upgrade.
[00006650][12 01][00] v1.8.0.0 -> v1.11.0.0 need upgrade.
[00006750][12 02][00] v1.8.0.0 -> v1.11.0.0 need upgrade.
[00006851][12 03][00] v1.8.0.0 -> v1.11.0.0 need upgrade.
[00006974][15 00][00] v1.1.2.0 -> v1.1.2.0
[00007051][17 00][00] v1.1.0.4 -> v1.1.0.4
[00007171][17 01][00] v2.0.0.8 -> v2.0.1.2 need upgrade.
[00007239][19 00][00] v1.0.8.96 -> v1.0.8.96
[00007289]Done.

[00009345]Waiting for user confirm...
[00019399]Timeout, start upgrade automatically.

[00019493]Firmware upgrading[1]...
[00037613][01 00] Firmware upgrade start...
[00022184][01 00] Firmware upgrade finished successfully.
[00022352]Done.

[00022457]Packet [C:\WM610_FW_V01.06.00.40.bin] resumed, card sn [0x1890ed54].
[00022527]Packet vlink 01.06.0040 <-> 01.05.0030.
[00022581]Record vlink 01.04.0010 <-> 01.03.0000 (flow = 0).
[00022658]Version checking[2]...
[00022760][01 00][05] v2.47.4492 -> v2.47.4492
[00022868][01 01][00] v1.19.3422 -> v2.47.4492 need upgrade
[00022966][03 05][00] v34.1.0.5 -> v34.1.0.5
[00023167][03 06][00] v2.3.0.13 -> v2.4.10.7 need upgrade.
[00023230][04 00][00] v1.26.0.21 -> v1.29.0.51 need upgrade.
[00023309][05 00][00] v3.0.6.1 -> v3.0.6.2 need upgrade.
[00023372][08 00][00] v1.14.0.25 -> v2.14.9.35 need upgrade.
[00023435][09 00][00] v1.8.0.0 -> v1.8.0.0
[00023509][11 00][00] v3.8.15.4 -> v3.8.15.4
[00023606][12 00][00] v1.8.0.0 -> v1.11.0.0 need upgrade.
[00023714][12 01][00] v1.8.0.0 -> v1.11.0.0 need upgrade.
[00023846][12 02][00] v1.8.0.0 -> v1.11.0.0 need upgrade.
[00023946][12 03][00] v1.8.0.0 -> v1.11.0.0 need upgrade.
[00024738][15 00][00] v1.1.2.0 -> v1.1.2.0
[00024806][17 00][00] v1.1.0.4 -> v1.1.0.4
[00024906][17 01][00] v2.0.0.8 -> v2.0.1.2 need upgrade.
[00024977][19 00][00] v1.0.8.96 -> v1.0.8.96
[00025019]Done.

[00025064]Firmware upgrading[2]...
[00025163][01 01] Firmware upgrade start...
[00035472][01 01] Firmware upgrade finished successfully.
[00036134][08 00] Firmware upgrade start...
[00007068]========== remo-con disconnect. boot(15) ============
[00007198]Packet [C:\WM610_FW_V01.06.00.40.bin] detected, card sn [0x1890ed54].
[00007328]Packet upgrade start...

[00007449]Packet checking...
[00007552]Packet vlink 01.06.0040 <-> 01.05.0030.
[00007596]Record vlink 01.04.0010 <-> 01.03.0000 (flow = 0).
[00007683]Done.

[00007804]Version checking[1]...
[00007849][01 00][00] v2.47.4492 -> v2.47.4492
[00007897][01 01][00] v2.47.4492 -> v2.47.4492
[00008001][03 05][00] v34.1.0.5 -> v34.1.0.5
[00008101][03 06][00] v2.3.0.13 -> v2.4.10.7 need upgrade.
[00008164][04 00][00] v1.26.0.21 -> v1.29.0.51 need upgrade.
[00008239][05 00][00] v3.0.6.1 -> v3.0.6.2 need upgrade.
[00020781][08 00][00] device not detected.
[00020838][09 00][00] v1.8.0.0 -> v1.8.0.0
[00020918][11 00][00] v3.8.15.4 -> v3.8.15.4
[00021018][12 00][00] v1.8.0.0 -> v1.11.0.0 need upgrade.
[00021118][12 01][00] v1.8.0.0 -> v1.11.0.0 need upgrade.
[00021218][12 02][00] v1.8.0.0 -> v1.11.0.0 need upgrade.
[00021298][12 03][00] v1.8.0.0 -> v1.11.0.0 need upgrade.
[00033932][15 00][00] device not detected.
[00034017][17 00][00] v1.1.0.4 -> v1.1.0.4
[00034137][17 01][00] v2.0.0.8 -> v2.0.1.2 need upgrade.
[00034203][19 00][00] v1.0.8.96 -> v1.0.8.96
[00034247]Done.

[00037798]Waiting for user confirm...
[00047841]Timeout, start upgrade automatically.

[00047929]Firmware upgrading[1]...
[00047985][12 00] Firmware upgrade start...
[00087210][12 00] Firmware upgrade finished successfully.
[00087263][12 01] Firmware upgrade start...
[00125426][12 01] Firmware upgrade finished successfully.
[00125476][12 02] Firmware upgrade start...
[00163804][12 02] Firmware upgrade finished successfully.
[00163861][12 03] Firmware upgrade start...
[00202222][12 03] Firmware upgrade finished successfully.
[00202342][03 06] Firmware upgrade start...
[00419823][03 06] Firmware upgrade finished successfully.
[00419870][17 01] Firmware upgrade start...
[00453580][17 01] Firmware upgrade finished successfully.
[00453631][05 00] Firmware upgrade start...
[00478599][05 00] Firmware upgrade finished successfully.
[00478662][04 00] Firmware upgrade start...
[00525627][04 00] Firmware upgrade finished successfully.
[00525669]Done.

[00525712]Version checking[2]...
[00525762][01 00][00] v2.47.4492 -> v2.47.4492
[00525803][01 01][00] v2.47.4492 -> v2.47.4492
[00525877][03 05][00] v34.1.0.5 -> v34.1.0.5
[00525958][03 06][05] v2.4.10.7 -> v2.4.10.7
[00526007][04 00][05] v1.29.0.51 -> v1.29.0.51
[00526098][05 00][05] v3.0.6.2 -> v3.0.6.2
[00538640][08 00][00] device not detected.
[00538692][09 00][00] v1.8.0.0 -> v1.8.0.0
[00538777][11 00][00] v3.8.15.4 -> v3.8.15.4
[00538857][12 00][05] v1.11.0.0 -> v1.11.0.0
[00538957][12 01][05] v1.11.0.0 -> v1.11.0.0
[00539057][12 02][05] v1.11.0.0 -> v1.11.0.0
[00539157][12 03][05] v1.11.0.0 -> v1.11.0.0
[00551705][15 00][00] device not detected.
[00551796][17 00][00] v1.1.0.4 -> v1.1.0.4
[00551896][17 01][05] v2.0.1.2 -> v2.0.1.2
[00552047][19 00][00] v1.0.8.96 -> v1.0.8.96
[00552095]Packet upgrade failed at version checking.



[00007033]========== 2016.02.26 15:13:37. boot(15) ============
[00007205]Packet [C:\WM610_FW_V01.06.00.40.bin] detected, card sn [0x1890ed54].
[00007330]Packet upgrade start...

[00007476]Packet checking...
[00007620]Packet vlink 01.06.0040 <-> 01.05.0030.
[00007723]Record vlink 01.04.0010 <-> 01.03.0000 (flow = 0).
[00007768]Done.

[00007892]Version checking[1]...
[00007971][01 00][00] v2.47.4492 -> v2.47.4492
[00008024][01 01][00] v2.47.4492 -> v2.47.4492
[00008114][03 05][00] v34.1.0.5 -> v34.1.0.5
[00008195][03 06][00] v2.4.10.7 -> v2.4.10.7
[00008244][04 00][00] v1.29.0.51 -> v1.29.0.51
[00008314][05 00][00] v3.0.6.2 -> v3.0.6.2
[00020864][08 00][00] device not detected.
[00020923][09 00][00] v1.8.0.0 -> v1.8.0.0
[00020994][11 00][00] v3.8.15.4 -> v3.8.15.4
[00021093][12 00][00] v1.11.0.0 -> v1.11.0.0
[00021193][12 01][00] v1.11.0.0 -> v1.11.0.0
[00021293][12 02][00] v1.11.0.0 -> v1.11.0.0
[00021393][12 03][00] v1.11.0.0 -> v1.11.0.0
[00033941][15 00][00] device not detected.
[00034015][17 00][00] v1.1.0.4 -> v1.1.0.4
[00034132][17 01][00] v2.0.1.2 -> v2.0.1.2
[00034192][19 00][00] v1.0.8.96 -> v1.0.8.96
[00036235]Packet upgrade failed at version checking.



[00007109]========== remo-con disconnect. boot(15) ============
[00007217]Packet [C:\WM610_FW_V01.06.00.40.bin] detected, card sn [0x1890ed54].
[00007371]Packet upgrade start...

[00007538]Packet checking...
[00007636]Packet vlink 01.06.0040 <-> 01.05.0030.
[00007726]Record vlink 01.04.0010 <-> 01.03.0000 (flow = 0).
[00007818]Done.

[00007933]Version checking[1]...
[00007980][01 00][00] v2.47.4492 -> v2.47.4492
[00008027][01 01][00] v2.47.4492 -> v2.47.4492
[00008108][03 05][00] v34.1.0.5 -> v34.1.0.5
[00008188][03 06][00] v2.4.10.7 -> v2.4.10.7
[00008258][04 00][00] v1.29.0.51 -> v1.29.0.51
[00008328][05 00][00] v3.0.6.2 -> v3.0.6.2
[00020876][08 00][00] device not detected.
[00021021][09 00][00] v1.8.0.0 -> v1.8.0.0
[00021108][11 00][00] v3.8.15.4 -> v3.8.15.4
[00021208][12 00][00] v1.11.0.0 -> v1.11.0.0
[00021308][12 01][00] v1.11.0.0 -> v1.11.0.0
[00021408][12 02][00] v1.11.0.0 -> v1.11.0.0
[00021508][12 03][00] v1.11.0.0 -> v1.11.0.0
[00034052][15 00][00] device not detected.
[00034126][17 00][00] v1.1.0.4 -> v1.1.0.4
[00034246][17 01][00] v2.0.1.2 -> v2.0.1.2
[00034306][19 00][00] v1.0.8.96 -> v1.0.8.96
[00036357]Packet upgrade failed at version checking.



[00007307]========== remo-con disconnect. boot(15) ============
[00007455]Packet [C:\WM610_FW_V01.06.00.40.bin] detected, card sn [0x9908df01].
[00007616]Packet upgrade start...

[00007680]Packet checking...
[00007766]Packet vlink 01.06.0040 <-> 01.05.0030.
[00007880]Record vlink 01.04.0010 <-> 01.03.0000 (flow = 0).
[00007929]Done.

[00007985]Version checking[1]...
[00008034][01 00][00] v2.47.4492 -> v2.47.4492
[00008085][01 01][00] v2.47.4492 -> v2.47.4492
[00008177][03 05][00] v34.1.0.5 -> v34.1.0.5
[00008256][03 06][00] v2.4.10.7 -> v2.4.10.7
[00008317][04 00][00] v1.29.0.51 -> v1.29.0.51
[00008396][05 00][00] v3.0.6.2 -> v3.0.6.2
[00020960][08 00][00] device not detected.
[00021020][09 00][00] v1.8.0.0 -> v1.8.0.0
[00021095][11 00][00] v3.8.15.4 -> v3.8.15.4
[00021196][12 00][00] v1.11.0.0 -> v1.11.0.0
[00021296][12 01][00] v1.11.0.0 -> v1.11.0.0
[00021376][12 02][00] v1.11.0.0 -> v1.11.0.0
[00021476][12 03][00] v1.11.0.0 -> v1.11.0.0
[00034023][15 00][00] device not detected.
[00034115][17 00][00] v1.1.0.4 -> v1.1.0.4
[00034235][17 01][00] v2.0.1.2 -> v2.0.1.2
[00034305][19 00][00] v1.0.8.96 -> v1.0.8.96
[00036351]Packet upgrade failed at version checking.



[00007040]========== remo-con disconnect. boot(15) ============
[00007213]Packet [C:\WM610_FW_V01.06.00.40.bin] detected, card sn [0x9908df01].
[00007347]Packet upgrade start...

[00007460]Packet checking...
[00007587]Packet vlink 01.06.0040 <-> 01.05.0030.
[00007862]Record vlink 01.04.0010 <-> 01.03.0000 (flow = 0).
[00007910]Done.

[00007963]Version checking[1]...
[00008020][01 00][00] v2.47.4492 -> v2.47.4492
[00008078][01 01][00] v2.47.4492 -> v2.47.4492
[00008158][03 05][00] v34.1.0.5 -> v34.1.0.5
[00008254][03 06][00] v2.4.10.7 -> v2.4.10.7
[00008314][04 00][00] v1.29.0.51 -> v1.29.0.51
[00008454][05 00][00] v3.0.6.2 -> v3.0.6.2
[00021007][08 00][00] device not detected.
[00021083][09 00][00] v1.8.0.0 -> v1.8.0.0
[00021153][11 00][00] v3.8.15.4 -> v3.8.15.4
[00021252][12 00][00] v1.11.0.0 -> v1.11.0.0
[00021352][12 01][00] v1.11.0.0 -> v1.11.0.0
[00021452][12 02][00] v1.11.0.0 -> v1.11.0.0
[00021552][12 03][00] v1.11.0.0 -> v1.11.0.0
[00034101][15 00][00] device not detected.
[00034212][17 00][00] v1.1.0.4 -> v1.1.0.4
[00034331][17 01][00] v2.0.1.2 -> v2.0.1.2
[00034401][19 00][00] v1.0.8.96 -> v1.0.8.96
[00036452]Packet upgrade failed at version checking.



[00007322]========== remo-con disconnect. boot(15) ============
[00007479]Packet [C:\WM610_FW_V01.06.00.40.bin] detected, card sn [0x9908df01].
[00007615]Packet upgrade start...

[00007771]Packet checking...
[00007824]Packet vlink 01.06.0040 <-> 01.05.0030.
[00007954]Record vlink 01.04.0010 <-> 01.03.0000 (flow = 0).
[00008057]Done.

[00008115]Version checking[1]...
[00008162][01 00][00] v2.47.4492 -> v2.47.4492
[00008214][01 01][00] v2.47.4492 -> v2.47.4492
[00008316][03 05][00] v34.1.0.5 -> v34.1.0.5
[00008416][03 06][00] v2.4.10.7 -> v2.4.10.7
[00008474][04 00][00] v1.29.0.51 -> v1.29.0.51
[00008579][05 00][00] v3.0.6.2 -> v3.0.6.2
[00021155][08 00][00] device not detected.
[00021261][09 00][00] v1.8.0.0 -> v1.8.0.0
[00021356][11 00][00] v3.8.15.4 -> v3.8.15.4
[00021456][12 00][00] v1.11.0.0 -> v1.11.0.0
[00021556][12 01][00] v1.11.0.0 -> v1.11.0.0
[00021656][12 02][00] v1.11.0.0 -> v1.11.0.0
[00021758][12 03][00] v1.11.0.0 -> v1.11.0.0
[00034307][15 00][00] device not detected.
[00034395][17 00][00] v1.1.0.4 -> v1.1.0.4
[00034595][17 01][00] v2.0.1.2 -> v2.0.1.2
[00034701][19 00][00] v1.0.8.96 -> v1.0.8.96
[00036751]Packet upgrade failed at version checking.



[00006930]========== 2016.02.27 01:52:47. boot(15) ============
[00007098]Packet [C:\WM610_FW_V01.06.00.40.bin] detected, card sn [0x9908df01].
[00007241]Packet upgrade start...

[00007452]Packet checking...
[00007584]Packet vlink 01.06.0040 <-> 01.05.0030.
[00007706]Record vlink 01.04.0010 <-> 01.03.0000 (flow = 0).
[00007843]Done.

[00007895]Version checking[1]...
[00007943][01 00][00] v2.47.4492 -> v2.47.4492
[00007990][01 01][00] v2.47.4492 -> v2.47.4492
[00008083][03 05][00] v34.1.0.5 -> v34.1.0.5
[00008164][03 06][00] v2.4.10.7 -> v2.4.10.7
[00008216][04 00][00] v1.29.0.51 -> v1.29.0.51
[00008323][05 00][00] v3.0.6.2 -> v3.0.6.2
[00020870][08 00][00] device not detected.
[00020931][09 00][00] v1.8.0.0 -> v1.8.0.0
[00021002][11 00][00] v3.8.15.4 -> v3.8.15.4
[00021102][12 00][00] v1.11.0.0 -> v1.11.0.0
[00021203][12 01][00] v1.11.0.0 -> v1.11.0.0
[00021303][12 02][00] v1.11.0.0 -> v1.11.0.0
[00021403][12 03][00] v1.11.0.0 -> v1.11.0.0
[00033951][15 00][00] device not detected.
[00034021][17 00][00] v1.1.0.4 -> v1.1.0.4
[00034141][17 01][00] v2.0.1.2 -> v2.0.1.2
[00034201][19 00][00] v1.0.8.96 -> v1.0.8.96
[00036248]Packet upgrade failed at version checking.



[00007342]========== remo-con disconnect. boot(15) ============
[00007494]Packet [C:\WM610_FW_V01.03.00.00.bin] detected, card sn [0x9908df01].
[00007590]Packet upgrade start...

[00007729]Packet checking...
[00007781]Packet vlink 01.03.0000 <-> 01.02.0000.
[00007955]Record vlink 01.04.0010 <-> 01.03.0000 (flow = 1).
[00008008]Done.

[00008065]Version checking[1]...
[00008114][01 00][00] v2.47.4492 -> v1.19.3422
[00008168][01 01][00] v2.47.4492 -> v1.19.3422
[00008239][03 05][00] v34.1.0.5 -> v34.1.0.5
[00008321][03 06][00] v2.4.10.7 -> v2.2.6.33 need upgrade.
[00008385][04 00][00] v1.29.0.51 -> v1.26.0.3 need upgrade.
[00008560][05 00][00] v3.0.6.2 -> v3.0.6.1
[00021137][08 00][00] device not detected.
[00021202][09 00][00] v1.8.0.0 -> v1.8.0.0
[00021279][11 00][00] v3.8.15.4 -> v3.7.15.9
[00021379][12 00][00] v1.11.0.0 -> v1.8.0.0
[00021479][12 01][00] v1.11.0.0 -> v1.8.0.0
[00021579][12 02][00] v1.11.0.0 -> v1.8.0.0
[00021679][12 03][00] v1.11.0.0 -> v1.8.0.0
[00034229][15 00][00] device not detected.
[00034317][17 00][00] v1.1.0.4 -> v1.1.0.4
[00034437][17 01][00] v2.0.1.2 -> v2.0.0.8 need upgrade.
[00034501][19 00][00] v1.0.8.96 -> v1.0.8.96
[00034554]Done.

[00038114]Waiting for user confirm...
[00048169]Timeout, start upgrade automatically.

[00048278]Firmware upgrading[1]...
[00048405][03 06] Firmware upgrade start...
[00259656][03 06] Firmware upgrade finished successfully.
[00259721][17 01] Firmware upgrade start...
[00293313][17 01] Firmware upgrade finished successfully.
[00293387][04 00] Firmware upgrade start...
[00336139][04 00] Firmware upgrade finished successfully.
[00336194]Done.

[00336255]Version checking[2]...
[00336303][01 00][00] v2.47.4492 -> v1.19.3422
[00336357][01 01][00] v2.47.4492 -> v1.19.3422
[00336434][03 05][00] v34.1.0.5 -> v34.1.0.5
[00336513][03 06][05] v2.2.6.33 -> v2.2.6.33
[00336579][04 00][05] v1.26.0.3 -> v1.26.0.3
[00336653][05 00][00] v3.0.6.2 -> v3.0.6.1
[00349202][08 00][00] device not detected.
[00349267][09 00][00] v1.8.0.0 -> v1.8.0.0
[00349352][11 00][00] v3.8.15.4 -> v3.7.15.9
[00349451][12 00][00] v1.11.0.0 -> v1.8.0.0
[00349551][12 01][00] v1.11.0.0 -> v1.8.0.0
[00349651][12 02][00] v1.11.0.0 -> v1.8.0.0
[00349751][12 03][00] v1.11.0.0 -> v1.8.0.0
[00362308][15 00][00] device not detected.
[00362391][17 00][00] v1.1.0.4 -> v1.1.0.4
[00362531][17 01][05] v2.0.0.8 -> v2.0.0.8
[00362601][19 00][00] v1.0.8.96 -> v1.0.8.96
[00362658]Packet upgrade failed at version checking.



[00007350]========== remo-con disconnect. boot(15) ============
[00007494]Packet [C:\WM610_FW_V01.05.00.30.bin] detected, card sn [0x9908df01].
[00007744]Packet upgrade start...

[00007885]Packet checking...
[00007948]Packet vlink 01.05.0030 <-> 01.04.0010.
[00007998]Record vlink 01.04.0010 <-> 01.03.0000 (flow = 0).
[00008057]Done.

[00008117]Version checking[1]...
[00020677][08 00][00] device not detected.
[00020726][01 00][00] v2.47.4492 -> v2.47.4492
[00020785][01 01][00] v2.47.4492 -> v2.47.4492
[00020854][03 05][00] v34.1.0.5 -> v34.1.0.5
[00020934][03 06][00] v2.2.6.33 -> v2.4.0.5 need upgrade.
[00020996][04 00][00] v1.26.0.3 -> v1.29.0.51 need upgrade.
[00021093][05 00][00] v3.0.6.2 -> v3.0.6.2
[00021154][09 00][00] v1.8.0.0 -> v1.8.0.0
[00021234][11 00][00] v3.8.15.4 -> v3.8.15.4
[00021354][12 00][00] v1.11.0.0 -> v1.11.0.0
[00021454][12 01][00] v1.11.0.0 -> v1.11.0.0
[00021554][12 02][00] v1.11.0.0 -> v1.11.0.0
[00021655][12 03][00] v1.11.0.0 -> v1.11.0.0
[00034203][15 00][00] device not detected.
[00034292][17 00][00] v1.1.0.4 -> v1.1.0.4
[00034412][17 01][00] v2.0.0.8 -> v2.0.1.2 need upgrade.
[00034488][19 00][00] v1.0.8.96 -> v1.0.8.96
[00034539]Done.

[00038108]Waiting for user confirm...
[00048155]Timeout, start upgrade automatically.

[00048268]Firmware upgrading[1]...
[00048403][03 06] Firmware upgrade start...
[00267511][03 06] Firmware upgrade finished successfully.
[00267573][17 01] Firmware upgrade start...
[00297236][17 01] Firmware upgrade finish without reboot.
[00307287][17 01] Firmware upgrade finished successfully.
[00307365][04 00] Firmware upgrade start...
[00355187][04 00] Firmware upgrade finished successfully.
[00355237]Done.

[00355297]Version checking[2]...
[00367846][08 00][00] device not detected.
[00367902][01 00][00] v2.47.4492 -> v2.47.4492
[00367951][01 01][00] v2.47.4492 -> v2.47.4492
[00368046][03 05][00] v34.1.0.5 -> v34.1.0.5
[00368147][03 06][05] v2.4.0.5 -> v2.4.0.5
[00368211][04 00][05] v1.29.0.51 -> v1.29.0.51
[00368306][05 00][00] v3.0.6.2 -> v3.0.6.2
[00368367][09 00][00] v1.8.0.0 -> v1.8.0.0
[00368527][11 00][00] v3.8.15.4 -> v3.8.15.4
[00368627][12 00][00] v1.11.0.0 -> v1.11.0.0
[00368766][12 01][00] v1.11.0.0 -> v1.11.0.0
[00368866][12 02][00] v1.11.0.0 -> v1.11.0.0
[00368966][12 03][00] v1.11.0.0 -> v1.11.0.0
[00381521][15 00][00] device not detected.
[00381605][17 00][00] v1.1.0.4 -> v1.1.0.4
[00381744][17 01][05] v2.0.1.2 -> v2.0.1.2
[00381805][19 00][00] v1.0.8.96 -> v1.0.8.96
[00381862]Packet upgrade failed at version checking.



[00007380]========== remo-con disconnect. boot(15) ============
[00007550]Packet [C:\WM610_FW_V01.06.00.40.bin] detected, card sn [0x9908df01].
[00007652]Packet upgrade start...

[00007710]Packet checking...
[00007858]Packet vlink 01.06.0040 <-> 01.05.0030.
[00007914]Record vlink 01.04.0010 <-> 01.03.0000 (flow = 0).
[00007966]Done.

[00008021]Version checking[1]...
[00008078][01 00][00] v2.47.4492 -> v2.47.4492
[00008135][01 01][00] v2.47.4492 -> v2.47.4492
[00008234][03 05][00] v34.1.0.5 -> v34.1.0.5
[00008353][03 06][00] v2.4.0.5 -> v2.4.10.7 need upgrade.
[00008419][04 00][00] v1.29.0.51 -> v1.29.0.51
[00008533][05 00][00] v3.0.6.2 -> v3.0.6.2
[00021091][08 00][00] device not detected.
[00021165][09 00][00] v1.8.0.0 -> v1.8.0.0
[00021233][11 00][00] v3.8.15.4 -> v3.8.15.4
[00021333][12 00][00] v1.11.0.0 -> v1.11.0.0
[00021433][12 01][00] v1.11.0.0 -> v1.11.0.0
[00021533][12 02][00] v1.11.0.0 -> v1.11.0.0
[00021613][12 03][00] v1.11.0.0 -> v1.11.0.0
[00034171][15 00][00] device not detected.
[00034251][17 00][00] v1.1.0.4 -> v1.1.0.4
[00034371][17 01][00] v2.0.1.2 -> v2.0.1.2
[00034434][19 00][00] v1.0.8.96 -> v1.0.8.96
[00034487]Done.

[00038063]Waiting for user confirm...
[00048118]Timeout, start upgrade automatically.

[00048228]Firmware upgrading[1]...
[00048364][03 06] Firmware upgrade start...
[00269930][03 06] Firmware upgrade finished successfully.
[00269985]Done.

[00270037]Version checking[2]...
[00270089][01 00][00] v2.47.4492 -> v2.47.4492
[00270227][01 01][00] v2.47.4492 -> v2.47.4492
[00270333][03 05][00] v34.1.0.5 -> v34.1.0.5
[00270440][03 06][05] v2.4.10.7 -> v2.4.10.7
[00270505][04 00][00] v1.29.0.51 -> v1.29.0.51
[00270572][05 00][00] v3.0.6.2 -> v3.0.6.2
[00283130][08 00][00] device not detected.
[00283202][09 00][00] v1.8.0.0 -> v1.8.0.0
[00283292][11 00][00] v3.8.15.4 -> v3.8.15.4
[00283392][12 00][00] v1.11.0.0 -> v1.11.0.0
[00283492][12 01][00] v1.11.0.0 -> v1.11.0.0
[00283612][12 02][00] v1.11.0.0 -> v1.11.0.0
[00283732][12 03][00] v1.11.0.0 -> v1.11.0.0
[00296297][15 00][00] device not detected.
[00296370][17 00][00] v1.1.0.4 -> v1.1.0.4
[00296490][17 01][00] v2.0.1.2 -> v2.0.1.2
[00296562][19 00][00] v1.0.8.96 -> v1.0.8.96
[00296618]Packet upgrade failed at version checking.



[00007023]========== remo-con disconnect. boot(15) ============
[00007183]Packet [C:\WM610_FW_V01.06.00.40.bin] detected, card sn [0x9908df01].
[00007360]Packet upgrade start...

[00007421]Packet checking...
[00007570]Packet vlink 01.06.0040 <-> 01.05.0030.
[00007625]Record vlink 01.04.0010 <-> 01.03.0000 (flow = 0).
[00007686]Done.

[00007744]Version checking[1]...
[00007797][01 00][00] v2.47.4492 -> v2.47.4492
[00007858][01 01][00] v2.47.4492 -> v2.47.4492
[00007971][03 05][00] v34.1.0.5 -> v34.1.0.5
[00008070][03 06][00] v2.4.10.7 -> v2.4.10.7
[00008134][04 00][00] v1.29.0.51 -> v1.29.0.51
[00008270][05 00][00] v3.0.6.2 -> v3.0.6.2
[00020826][08 00][00] device not detected.
[00020899][09 00][00] v1.8.0.0 -> v1.8.0.0
[00021009][11 00][00] v3.8.15.4 -> v3.8.15.4
[00021129][12 00][00] v1.11.0.0 -> v1.11.0.0
[00021248][12 01][00] v1.11.0.0 -> v1.11.0.0
[00021348][12 02][00] v1.11.0.0 -> v1.11.0.0
[00021450][12 03][00] v1.11.0.0 -> v1.11.0.0
[00034003][15 00][00] device not detected.
[00034089][17 00][00] v1.1.0.4 -> v1.1.0.4
[00036710][17 01][00] v2.0.1.2 -> v2.0.1.2
[00036783][19 00][00] v1.0.8.96 -> v1.0.8.96
[00038835]Packet upgrade failed at version checking.



[00007023]========== remo-con disconnect. boot(15) ============
[00007207]Packet [C:\WM610_FW_V01.06.00.40.bin] detected, card sn [0x9908df01].
[00007353]Packet upgrade start...

[00007413]Packet checking...
[00007570]Packet vlink 01.06.0040 <-> 01.05.0030.
[00007627]Record vlink 01.04.0010 <-> 01.03.0000 (flow = 0).
[00007687]Done.

[00007747]Version checking[1]...
[00007800][01 00][00] v2.47.4492 -> v2.47.4492
[00007860][01 01][00] v2.47.4492 -> v2.47.4492
[00007956][03 05][00] v34.1.0.5 -> v34.1.0.5
[00008055][03 06][00] v2.4.10.7 -> v2.4.10.7
[00008125][04 00][00] v1.29.0.51 -> v1.29.0.51
[00008235][05 00][00] v3.0.6.2 -> v3.0.6.2
[00020804][08 00][00] device not detected.
[00020880][09 00][00] v1.8.0.0 -> v1.8.0.0
[00020994][11 00][00] v3.8.15.4 -> v3.8.15.4
[00021115][12 00][00] v1.11.0.0 -> v1.11.0.0
[00021215][12 01][00] v1.11.0.0 -> v1.11.0.0
[00021315][12 02][00] v1.11.0.0 -> v1.11.0.0
[00021415][12 03][00] v1.11.0.0 -> v1.11.0.0
[00033970][15 00][00] device not detected.
[00034054][17 00][00] v1.1.0.4 -> v1.1.0.4
[00034173][17 01][00] v2.0.1.2 -> v2.0.1.2
[00034238][19 00][00] v1.0.8.96 -> v1.0.8.96
[00036289]Packet upgrade failed at version checking.



[00007119]========== remo-con disconnect. boot(15) ============
[00007299]Packet [C:\WM610_FW_V01.06.00.40.bin] detected, card sn [0x9908df01].
[00007476]Packet upgrade start...

[00007539]Packet checking...
[00007685]Packet vlink 01.06.0040 <-> 01.05.0030.
[00007745]Record vlink 01.04.0010 <-> 01.03.0000 (flow = 0).
[00007804]Done.

[00007864]Version checking[1]...
[00007916][01 00][00] v2.47.4492 -> v2.47.4492
[00007977][01 01][00] v2.47.4492 -> v2.47.4492
[00008091][03 05][00] v34.1.0.5 -> v34.1.0.5
[00008191][03 06][00] v2.4.10.7 -> v2.4.10.7
[00008267][04 00][00] v1.29.0.51 -> v1.29.0.51
[00008392][05 00][00] v3.0.6.2 -> v3.0.6.2
[00020946][08 00][00] device not detected.
[00021017][09 00][00] v1.8.0.0 -> v1.8.0.0
[00021108][11 00][00] v3.8.15.4 -> v3.8.15.4
[00021308][12 00][00] v1.11.0.0 -> v1.11.0.0
[00021408][12 01][00] v1.11.0.0 -> v1.11.0.0
[00021548][12 02][00] v1.11.0.0 -> v1.11.0.0
[00021648][12 03][00] v1.11.0.0 -> v1.11.0.0
[00034207][15 00][00] device not detected.
[00034307][17 00][00] v1.1.0.4 -> v1.1.0.4
[00034427][17 01][00] v2.0.1.2 -> v2.0.1.2
[00034517][19 00][00] v1.0.8.96 -> v1.0.8.96
[00036572]Packet upgrade failed at version checking.



[00007156]========== remo-con disconnect. boot(15) ============
[00007310]Packet [C:\WM610_FW_V01.06.00.40.bin] detected, card sn [0x9908df01].
[00007428]Packet upgrade start...

[00007496]Packet checking...
[00007670]Packet vlink 01.06.0040 <-> 01.05.0030.
[00007729]Record vlink 01.04.0010 <-> 01.03.0000 (flow = 0).
[00007790]Done.

[00007848]Version checking[1]...
[00007904][01 00][00] v2.47.4492 -> v2.47.4492
[00007967][01 01][00] v2.47.4492 -> v2.47.4492
[00008070][03 05][00] v34.1.0.5 -> v34.1.0.5
[00008170][03 06][00] v2.4.10.7 -> v2.4.10.7
[00008241][04 00][00] v1.29.0.51 -> v1.29.0.51
[00008350][05 00][00] v3.0.6.2 -> v3.0.6.2
[00020907][08 00][00] device not detected.
[00020983][09 00][00] v1.8.0.0 -> v1.8.0.0
[00021089][11 00][00] v3.8.15.4 -> v3.8.15.4
[00021188][12 00][00] v1.11.0.0 -> v1.11.0.0
[00021291][12 01][00] v1.11.0.0 -> v1.11.0.0
[00021388][12 02][00] v1.11.0.0 -> v1.11.0.0
[00021509][12 03][00] v1.11.0.0 -> v1.11.0.0
[00034066][15 00][00] device not detected.
[00034149][17 00][00] v1.1.0.4 -> v1.1.0.4
[00034268][17 01][00] v2.0.1.2 -> v2.0.1.2
[00034337][19 00][00] v1.0.8.96 -> v1.0.8.96
[00036390]Packet upgrade failed at version checking.



[00007120]========== remo-con disconnect. boot(15) ============
[00007281]Packet [C:\WM610_FW_V01.06.00.40.bin] detected, card sn [0x9908df01].
[00007451]Packet upgrade start...

[00007517]Packet checking...
[00007656]Packet vlink 01.06.0040 <-> 01.05.0030.
[00007736]Record vlink 01.04.0010 <-> 01.03.0000 (flow = 0).
[00007798]Done.

[00007855]Version checking[1]...
[00007998][01 00][00] v2.47.4492 -> v2.47.4492
[00008064][01 01][00] v2.47.4492 -> v2.47.4492
[00008164][03 05][00] v34.1.0.5 -> v34.1.0.5
[00008263][03 06][00] v2.4.10.7 -> v2.4.10.7
[00008355][04 00][00] v1.29.0.51 -> v1.29.0.51
[00008443][05 00][00] v3.0.6.2 -> v3.0.6.2
[00021003][08 00][00] device not detected.
[00021082][09 00][00] v1.8.0.0 -> v1.8.0.0
[00021163][11 00][00] v3.8.15.4 -> v3.8.15.4
[00021282][12 00][00] v1.11.0.0 -> v1.11.0.0
[00021382][12 01][00] v1.11.0.0 -> v1.11.0.0
[00021482][12 02][00] v1.11.0.0 -> v1.11.0.0
[00021582][12 03][00] v1.11.0.0 -> v1.11.0.0
[00034140][15 00][00] device not detected.
[00034221][17 00][00] v1.1.0.4 -> v1.1.0.4
[00034361][17 01][00] v2.0.1.2 -> v2.0.1.2
[00034430][19 00][00] v1.0.8.96 -> v1.0.8.96
[00036489]Packet upgrade failed at version checking.



[00007058]========== 2016.02.27 03:33:41. boot(15) ============
[00007202]Packet [C:\WM610_FW_V01.06.00.40.bin] detected, card sn [0x9908df01].
[00007356]Packet upgrade start...

[00007561]Packet checking...
[00007749]Packet vlink 01.06.0040 <-> 01.05.0030.
[00007862]Record vlink 01.04.0010 <-> 01.03.0000 (flow = 0).
[00007915]Done.

[00007968]Version checking[1]...
[00008023][01 00][00] v2.47.4492 -> v2.47.4492
[00008079][01 01][00] v2.47.4492 -> v2.47.4492
[00008153][03 05][00] v34.1.0.5 -> v34.1.0.5
[00008232][03 06][00] v2.4.10.7 -> v2.4.10.7
[00008306][04 00][00] v1.29.0.51 -> v1.29.0.51
[00008392][05 00][00] v3.0.6.2 -> v3.0.6.2
[00020947][08 00][00] device not detected.
[00021015][09 00][00] v1.8.0.0 -> v1.8.0.0
[00021131][11 00][00] v3.8.15.4 -> v3.8.15.4
[00021231][12 00][00] v1.11.0.0 -> v1.11.0.0
[00021351][12 01][00] v1.11.0.0 -> v1.11.0.0
[00021452][12 02][00] v1.11.0.0 -> v1.11.0.0
[00021552][12 03][00] v1.11.0.0 -> v1.11.0.0
[00034105][15 00][00] device not detected.
[00034190][17 00][00] v1.1.0.4 -> v1.1.0.4
[00034330][17 01][00] v2.0.1.2 -> v2.0.1.2
[00034394][19 00][00] v1.0.8.96 -> v1.0.8.96
[00036530]Packet upgrade failed at version checking.



[00007215]========== remo-con disconnect. boot(15) ============
[00007406]Packet [C:\WM610_FW_V01.06.00.40.bin] detected, card sn [0x9908df01].
[00007531]Packet upgrade start...

[00007618]Packet checking...
[00007782]Packet vlink 01.06.0040 <-> 01.05.0030.
[00007852]Record vlink 01.04.0010 <-> 01.03.0000 (flow = 0).
[00007912]Done.

[00007977]Version checking[1]...
[00008044][01 00][00] v2.47.4492 -> v2.47.4492
[00008113][01 01][00] v2.47.4492 -> v2.47.4492
[00008190][03 05][00] v34.1.0.5 -> v34.1.0.5
[00008290][03 06][00] v2.4.10.7 -> v2.4.10.7
[00008378][04 00][00] v1.29.0.51 -> v1.29.0.51
[00008470][05 00][00] v3.0.6.2 -> v3.0.6.2
[00021033][08 00][00] device not detected.
[00021119][09 00][00] v1.8.0.0 -> v1.8.0.0
[00021210][11 00][00] v3.8.15.4 -> v3.8.15.4
[00021332][12 00][00] v1.11.0.0 -> v1.11.0.0
[00021431][12 01][00] v1.11.0.0 -> v1.11.0.0
[00021570][12 02][00] v1.11.0.0 -> v1.11.0.0
[00021670][12 03][00] v1.11.0.0 -> v1.11.0.0
[00034227][15 00][00] device not detected.
[00034328][17 00][00] v1.1.0.4 -> v1.1.0.4
[00034448][17 01][00] v2.0.1.2 -> v2.0.1.2
[00034516][19 00][00] v1.0.8.96 -> v1.0.8.96
[00036570]Packet upgrade failed at version checking.



[00007027]========== remo-con disconnect. boot(15) ============
[00007221]Packet [C:\WM610_FW_V01.06.00.40.bin] detected, card sn [0x9908df01].
[00007392]Packet upgrade start...

[00007457]Packet checking...
[00007611]Packet vlink 01.06.0040 <-> 01.05.0030.
[00007673]Record vlink 01.04.0010 <-> 01.03.0000 (flow = 0).
[00007736]Done.

[00007794]Version checking[1]...
[00007856][01 00][00] v2.47.4492 -> v2.47.4492
[00007921][01 01][00] v2.47.4492 -> v2.47.4492
[00008017][03 05][00] v34.1.0.5 -> v34.1.0.5
[00008117][03 06][00] v2.4.10.7 -> v2.4.10.7
[00008196][04 00][00] v1.29.0.51 -> v1.29.0.51
[00008316][05 00][00] v3.0.6.2 -> v3.0.6.2
[00020890][08 00][00] device not detected.
[00020970][09 00][00] v1.8.0.0 -> v1.8.0.0
[00021157][11 00][00] v3.8.15.4 -> v3.8.15.4
[00021257][12 00][00] v1.11.0.0 -> v1.11.0.0
[00021357][12 01][00] v1.11.0.0 -> v1.11.0.0
[00021457][12 02][00] v1.11.0.0 -> v1.11.0.0
[00021558][12 03][00] v1.11.0.0 -> v1.11.0.0
[00034116][15 00][00] device not detected.
[00034215][17 00][00] v1.1.0.4 -> v1.1.0.4
[00036835][17 01][00] v2.0.1.2 -> v2.0.1.2
[00036907][19 00][00] v1.0.8.96 -> v1.0.8.96
[00038963]Packet upgrade failed at version checking.



[00006990]========== remo-con disconnect. boot(15) ============
[00007190]Packet [C:\WM610_FW_V01.06.00.40.bin] detected, card sn [0x00009d20].
[00007289]Packet upgrade start...

[00007381]Packet checking...
[00007513]Packet vlink 01.06.0040 <-> 01.05.0030.
[00007581]Record vlink 01.04.0010 <-> 01.03.0000 (flow = 0).
[00007634]Done.

[00007692]Version checking[1]...
[00007750][01 00][00] v2.47.4492 -> v2.47.4492
[00007817][01 01][00] v2.47.4492 -> v2.47.4492
[00007901][03 05][00] v34.1.0.5 -> v34.1.0.5
[00007981][03 06][00] v2.4.10.7 -> v2.4.10.7
[00008042][04 00][00] v1.29.0.51 -> v1.29.0.51
[00008120][05 00][00] v3.0.6.2 -> v3.0.6.2
[00020699][08 00][00] device not detected.
[00020773][09 00][00] v1.8.0.0 -> v1.8.0.0
[00020859][11 00][00] v3.8.15.4 -> v3.8.15.4
[00020959][12 00][00] v1.11.0.0 -> v1.11.0.0
[00021059][12 01][00] v1.11.0.0 -> v1.11.0.0
[00021160][12 02][00] v1.11.0.0 -> v1.11.0.0
[00021260][12 03][00] v1.11.0.0 -> v1.11.0.0
[00033812][15 00][00] device not detected.
[00033899][17 00][00] v1.1.0.4 -> v1.1.0.4
[00034019][17 01][00] v2.0.1.2 -> v2.0.1.2
[00034082][19 00][00] v1.0.8.96 -> v1.0.8.96
[00036137]Packet upgrade failed at version checking.



[00007073]========== remo-con disconnect. boot(15) ============
[00007226]Packet [C:\WM610_FW_V01.06.00.40.bin] detected, card sn [0x00009d20].
[00007300]Packet upgrade start...

[00007397]Packet checking...
[00007532]Packet vlink 01.06.0040 <-> 01.05.0030.
[00007588]Record vlink 01.04.0010 <-> 01.03.0000 (flow = 0).
[00007722]Done.

[00007779]Version checking[1]...
[00007843][01 00][00] v2.47.4492 -> v2.47.4492
[00007899][01 01][00] v2.47.4492 -> v2.47.4492
[00007995][03 05][00] v34.1.0.5 -> v34.1.0.5
[00008075][03 06][00] v2.4.10.7 -> v2.4.10.7
[00008167][04 00][00] v1.29.0.51 -> v1.29.0.51
[00008256][05 00][00] v3.0.6.2 -> v3.0.6.2
[00020818][08 00][00] device not detected.
[00020888][09 00][00] v1.8.0.0 -> v1.8.0.0
[00020994][11 00][00] v3.8.15.4 -> v3.8.15.4
[00021094][12 00][00] v1.11.0.0 -> v1.11.0.0
[00021195][12 01][00] v1.11.0.0 -> v1.11.0.0
[00021295][12 02][00] v1.11.0.0 -> v1.11.0.0
[00021395][12 03][00] v1.11.0.0 -> v1.11.0.0
[00033951][15 00][00] device not detected.
[00034034][17 00][00] v1.1.0.4 -> v1.1.0.4
[00034155][17 01][00] v2.0.1.2 -> v2.0.1.2
[00034217][19 00][00] v1.0.8.96 -> v1.0.8.96
[00036270]Packet upgrade failed at version checking.



[00007056]========== 2016.02.27 11:22:11. boot(15) ============
[00007229]Packet [C:\WM610_FW_V01.06.00.40.bin] detected, card sn [0x9908df01].
[00007413]Packet upgrade start...

[00007526]Packet checking...
[00007651]Packet vlink 01.06.0040 <-> 01.05.0030.
[00007718]Record vlink 01.04.0010 <-> 01.03.0000 (flow = 0).
[00007781]Done.

[00007845]Version checking[1]...
[00007914][01 00][00] v2.47.4492 -> v2.47.4492
[00007977][01 01][00] v2.47.4492 -> v2.47.4492
[00008070][03 05][00] v34.1.0.5 -> v34.1.0.5
[00008171][03 06][00] v2.4.10.7 -> v2.4.10.7
[00008282][04 00][00] v1.29.0.51 -> v1.29.0.51
[00008390][05 00][00] v3.0.6.2 -> v3.0.6.2
[00020954][08 00][00] device not detected.
[00021024][09 00][00] v1.8.0.0 -> v1.8.0.0
[00021116][11 00][00] v3.8.15.4 -> v3.8.15.4
[00021230][12 00][00] v1.11.0.0 -> v1.11.0.0
[00021330][12 01][00] v1.11.0.0 -> v1.11.0.0
[00021450][12 02][00] v1.11.0.0 -> v1.11.0.0
[00021550][12 03][00] v1.11.0.0 -> v1.11.0.0
[00034112][15 00][00] device not detected.
[00034208][17 00][00] v1.1.0.4 -> v1.1.0.4
[00034328][17 01][00] v2.0.1.2 -> v2.0.1.2
[00034508][19 00][00] v1.0.8.96 -> v1.0.8.96
[00036577]Packet upgrade failed at version checking.



[00007159]========== remo-con disconnect. boot(15) ============
[00007284]Packet [C:\WM610_FW_V01.06.00.40.bin] detected, card sn [0x9908df01].
[00007394]Packet upgrade start...

[00007508]Packet checking...
[00007670]Packet vlink 01.06.0040 <-> 01.05.0030.
[00007740]Record vlink 01.04.0010 <-> 01.03.0000 (flow = 0).
[00007803]Done.

[00007872]Version checking[1]...
[00007945][01 00][00] v2.47.4492 -> v2.47.4492
[00008006][01 01][00] v2.47.4492 -> v2.47.4492
[00008106][03 05][00] v34.1.0.5 -> v34.1.0.5
[00008226][03 06][00] v2.4.10.7 -> v2.4.10.7
[00008318][04 00][00] v1.29.0.51 -> v1.29.0.51
[00008426][05 00][00] v3.0.6.2 -> v3.0.6.2
[00020989][08 00][00] device not detected.
[00021069][09 00][00] v1.8.0.0 -> v1.8.0.0
[00021146][11 00][00] v3.8.15.4 -> v3.8.15.4
[00021266][12 00][00] v1.11.0.0 -> v1.11.0.0
[00021368][12 01][00] v1.11.0.0 -> v1.11.0.0
[00021486][12 02][00] v1.11.0.0 -> v1.11.0.0
[00021606][12 03][00] v1.11.0.0 -> v1.11.0.0
[00034166][15 00][00] device not detected.
[00036746][17 00][00] v1.1.0.4 -> v1.1.0.4
[00036864][17 01][00] v2.0.1.2 -> v2.0.1.2
[00036946][19 00][00] v1.0.8.96 -> v1.0.8.96
[00039004]Packet upgrade failed at version checking.



[00007386]========== remo-con disconnect. boot(15) ============
[00007497]Packet [C:\WM610_FW_V01.02.01.03.bin] detected, card sn [0x9c097ec9].
[00007604]Packet upgrade start...

[00007784]Packet checking...
[00007856]Packet upgrade failed at packet checking.



[00007133]========== remo-con disconnect. boot(15) ============
[00007291]Packet [C:\WM610_FW_V01.02.01.03.bin] detected, card sn [0x9c097ec9].
[00007368]Packet upgrade start...

[00007474]Packet checking...
[00007630]Packet upgrade failed at packet checking.



[00007378]========== remo-con disconnect. boot(15) ============
[00007498]Packet [C:\WM610_FW_V01.03.00.00.bin] detected, card sn [0x9c097ec9].
[00007772]Packet upgrade start...

[00007851]Packet checking...
[00007920]Packet vlink 01.03.0000 <-> 01.02.0000.
[00007987]Record vlink 01.04.0010 <-> 01.03.0000 (flow = 1).
[00008064]Done.

[00008129]Version checking[1]...
[00008205][01 00][00] v2.47.4492 -> v1.19.3422
[00008272][01 01][00] v2.47.4492 -> v1.19.3422
[00008401][03 05][00] v34.1.0.5 -> v34.1.0.5
[00008501][03 06][00] v2.4.10.7 -> v2.2.6.33 need upgrade.
[00008597][04 00][00] v1.29.0.51 -> v1.26.0.3 need upgrade.
[00008682][05 00][00] v3.0.6.2 -> v3.0.6.1
[00021248][08 00][00] device not detected.
[00021325][09 00][00] v1.8.0.0 -> v1.8.0.0
[00021423][11 00][00] v3.8.15.4 -> v3.7.15.9
[00021527][12 00][00] v1.11.0.0 -> v1.8.0.0
[00021661][12 01][00] v1.11.0.0 -> v1.8.0.0
[00021781][12 02][00] v1.11.0.0 -> v1.8.0.0
[00021881][12 03][00] v1.11.0.0 -> v1.8.0.0
[00034442][15 00][00] device not detected.
[00037019][17 00][00] v1.1.0.4 -> v1.1.0.4
[00037159][17 01][00] v2.0.1.2 -> v2.0.0.8 need upgrade.
[00037239][19 00][00] v1.0.8.96 -> v1.0.8.96
[00037298]Done.

[00040865]Waiting for user confirm...
[00050932]Timeout, start upgrade automatically.

[00051068]Firmware upgrading[1]...
[00051203][03 06] Firmware upgrade start...
[00262278][03 06] Firmware upgrade finished successfully.
[00262354][17 01] Firmware upgrade start...
[00324680][17 01] Firmware upgrade finish failed (step = 5, err = 0xaa, sum = 0x153c).
[00334764][04 00] Firmware upgrade start...
[00377576][04 00] Firmware upgrade finished successfully.
[00377641]Done.

[00377719]Version checking[2]...
[00377785][01 00][00] v2.47.4492 -> v1.19.3422
[00377847][01 01][00] v2.47.4492 -> v1.19.3422
[00377953][03 05][00] v34.1.0.5 -> v34.1.0.5
[00378059][03 06][05] v2.2.6.33 -> v2.2.6.33
[00378129][04 00][05] v1.26.0.3 -> v1.26.0.3
[00378233][05 00][00] v3.0.6.2 -> v3.0.6.1
[00390797][08 00][00] device not detected.
[00390871][09 00][00] v1.8.0.0 -> v1.8.0.0
[00390951][11 00][00] v3.8.15.4 -> v3.7.15.9
[00391131][12 00][00] v1.11.0.0 -> v1.8.0.0
[00391231][12 01][00] v1.11.0.0 -> v1.8.0.0
[00391331][12 02][00] v1.11.0.0 -> v1.8.0.0
[00391470][12 03][00] v1.11.0.0 -> v1.8.0.0
[00404035][15 00][00] device not detected.
[00404130][17 00][00] v0.0.0.0 -> v1.1.0.4 need upgrade.
[00404230][17 01][00] v0.0.0.0 -> v2.0.0.8 need upgrade.
[00404310][19 00][00] v1.0.8.96 -> v1.0.8.96
[00404373]Done.

[00404434]Firmware upgrading[2]...
[00404512][17 00] Firmware upgrade start...
[00437185][17 00] Firmware upgrade finished successfully.
[00437276][17 01] Firmware upgrade start...
[00470922][17 01] Firmware upgrade finished successfully.
[00470993]Done.

[00471056]Version checking[3]...
[00471120][01 00][00] v2.47.4492 -> v1.19.3422
[00471189][01 01][00] v2.47.4492 -> v1.19.3422
[00471284][03 05][00] v34.1.0.5 -> v34.1.0.5
[00471405][03 06][05] v2.2.6.33 -> v2.2.6.33
[00471477][04 00][05] v1.26.0.3 -> v1.26.0.3
[00471565][05 00][00] v3.0.6.2 -> v3.0.6.1
[00484135][08 00][00] device not detected.
[00484224][09 00][00] v1.8.0.0 -> v1.8.0.0
[00484304][11 00][00] v3.8.15.4 -> v3.7.15.9
[00484424][12 00][00] v1.11.0.0 -> v1.8.0.0
[00484546][12 01][00] v1.11.0.0 -> v1.8.0.0
[00484644][12 02][00] v1.11.0.0 -> v1.8.0.0
[00484746][12 03][00] v1.11.0.0 -> v1.8.0.0
[00497307][15 00][00] device not detected.
[00497403][17 00][05] v1.1.0.4 -> v1.1.0.4
[00497522][17 01][05] v2.0.0.8 -> v2.0.0.8
[00497622][19 00][00] v1.0.8.96 -> v1.0.8.96
[00497690]Packet upgrade failed at version checking.



[00007461]========== remo-con disconnect. boot(15) ============
[00007575]Packet [C:\WM610_FW_V01.05.00.30.bin] detected, card sn [0x9c097ec9].
[00007681]Packet upgrade start...

[00007844]Packet checking...
[00007913]Packet vlink 01.05.0030 <-> 01.04.0010.
[00007982]Record vlink 01.04.0010 <-> 01.03.0000 (flow = 0).
[00008049]Done.

[00008127]Version checking[1]...
[00020692][08 00][00] device not detected.
[00020754][01 00][00] v2.47.4492 -> v2.47.4492
[00020908][01 01][00] v2.47.4492 -> v2.47.4492
[00021009][03 05][00] v34.1.0.5 -> v34.1.0.5
[00021109][03 06][00] v2.2.6.33 -> v2.4.0.5 need upgrade.
[00021184][04 00][00] v1.26.0.3 -> v1.29.0.51 need upgrade.
[00021289][05 00][00] v3.0.6.2 -> v3.0.6.2
[00021363][09 00][00] v1.8.0.0 -> v1.8.0.0
[00021469][11 00][00] v3.8.15.4 -> v3.8.15.4
[00021570][12 00][00] v1.11.0.0 -> v1.11.0.0
[00021690][12 01][00] v1.11.0.0 -> v1.11.0.0
[00021790][12 02][00] v1.11.0.0 -> v1.11.0.0
[00021909][12 03][00] v1.11.0.0 -> v1.11.0.0
[00034477][15 00][00] device not detected.
[00034569][17 00][00] v1.1.0.4 -> v1.1.0.4
[00034730][17 01][00] v2.0.0.8 -> v2.0.1.2 need upgrade.
[00034802][19 00][00] v1.0.8.96 -> v1.0.8.96
[00034867]Done.

[00038434]Waiting for user confirm...
[00048498]Timeout, start upgrade automatically.

[00048635]Firmware upgrading[1]...
[00048794][03 06] Firmware upgrade start...
[00267646][03 06] Firmware upgrade finished successfully.
[00267724][17 01] Firmware upgrade start...
[00301463][17 01] Firmware upgrade finished successfully.
[00301546][04 00] Firmware upgrade start...
[00349012][04 00] Firmware upgrade finished successfully.
[00349070]Done.

[00349139]Version checking[2]...
[00361701][08 00][00] device not detected.
[00361767][01 00][00] v2.47.4492 -> v2.47.4492
[00361837][01 01][00] v2.47.4492 -> v2.47.4492
[00361942][03 05][00] v34.1.0.5 -> v34.1.0.5
[00362042][03 06][05] v2.4.0.5 -> v2.4.0.5
[00362113][04 00][05] v1.29.0.51 -> v1.29.0.51
[00362202][05 00][00] v3.0.6.2 -> v3.0.6.2
[00362296][09 00][00] v1.8.0.0 -> v1.8.0.0
[00362382][11 00][00] v3.8.15.4 -> v3.8.15.4
[00362501][12 00][00] v1.11.0.0 -> v1.11.0.0
[00362601][12 01][00] v1.11.0.0 -> v1.11.0.0
[00362741][12 02][00] v1.11.0.0 -> v1.11.0.0
[00362842][12 03][00] v1.11.0.0 -> v1.11.0.0
[00375407][15 00][00] device not detected.
[00375500][17 00][00] v1.1.0.4 -> v1.1.0.4
[00375621][17 01][05] v2.0.1.2 -> v2.0.1.2
[00375729][19 00][00] v1.0.8.96 -> v1.0.8.96
[00375880]Packet upgrade failed at version checking.



[00007683]========== remo-con disconnect. boot(15) ============
[00007827]Packet [C:\WM610_FW_V01.06.00.40.bin] detected, card sn [0x9c097ec9].
[00007904]Packet upgrade start...

[00007982]Packet checking...
[00008055]Packet vlink 01.06.0040 <-> 01.05.0030.
[00008137]Record vlink 01.04.0010 <-> 01.03.0000 (flow = 0).
[00008202]Done.

[00008270]Version checking[1]...
[00008350][01 00][00] v2.47.4492 -> v2.47.4492
[00008450][01 01][00] v2.47.4492 -> v2.47.4492
[00008559][03 05][00] v34.1.0.5 -> v34.1.0.5
[00008700][03 06][00] v2.4.0.5 -> v2.4.10.7 need upgrade.
[00008780][04 00][00] v1.29.0.51 -> v1.29.0.51
[00008879][05 00][00] v3.0.6.2 -> v3.0.6.2
[00021458][08 00][00] device not detected.
[00021539][09 00][00] v1.8.0.0 -> v1.8.0.0
[00021625][11 00][00] v3.8.15.4 -> v3.8.15.4
[00021739][12 00][00] v1.11.0.0 -> v1.11.0.0
[00021839][12 01][00] v1.11.0.0 -> v1.11.0.0
[00021939][12 02][00] v1.11.0.0 -> v1.11.0.0
[00022039][12 03][00] v1.11.0.0 -> v1.11.0.0
[00034605][15 00][00] device not detected.
[00034724][17 00][00] v1.1.0.4 -> v1.1.0.4
[00034858][17 01][00] v2.0.1.2 -> v2.0.1.2
[00034937][19 00][00] v1.0.8.96 -> v1.0.8.96
[00035008]Done.

[00038578]Waiting for user confirm...
[00048665]Timeout, start upgrade automatically.

[00048801]Firmware upgrading[1]...
[00048952][03 06] Firmware upgrade start...
[00270638][03 06] Firmware upgrade finished successfully.
[00270700]Done.

[00270772]Version checking[2]...
[00270837][01 00][00] v2.47.4492 -> v2.47.4492
[00270904][01 01][00] v2.47.4492 -> v2.47.4492
[00270999][03 05][00] v34.1.0.5 -> v34.1.0.5
[00271118][03 06][05] v2.4.10.7 -> v2.4.10.7
[00271198][04 00][00] v1.29.0.51 -> v1.29.0.51
[00271299][05 00][00] v3.0.6.2 -> v3.0.6.2
[00283863][08 00][00] device not detected.
[00283950][09 00][00] v1.8.0.0 -> v1.8.0.0
[00284038][11 00][00] v3.8.15.4 -> v3.8.15.4
[00284158][12 00][00] v1.11.0.0 -> v1.11.0.0
[00284358][12 01][00] v1.11.0.0 -> v1.11.0.0
[00284498][12 02][00] v1.11.0.0 -> v1.11.0.0
[00284618][12 03][00] v1.11.0.0 -> v1.11.0.0
[00297188][15 00][00] device not detected.
[00297297][17 00][00] v1.1.0.4 -> v1.1.0.4
[00297417][17 01][00] v2.0.1.2 -> v2.0.1.2
[00297503][19 00][00] v1.0.8.96 -> v1.0.8.96
[00297573]Packet upgrade failed at version checking.



[00007527]========== remo-con disconnect. boot(15) ============
[00007648]Packet [C:\WM610_FW_V01.06.00.40.bin] detected, card sn [0x9c097ec9].
[00007756]Packet upgrade start...

[00007921]Packet checking...
[00007999]Packet vlink 01.06.0040 <-> 01.05.0030.
[00008070]Record vlink 01.04.0010 <-> 01.03.0000 (flow = 0).
[00008146]Done.

[00008223]Version checking[1]...
[00008302][01 00][00] v2.47.4492 -> v2.47.4492
[00008374][01 01][00] v2.47.4492 -> v2.47.4492
[00008514][03 05][00] v34.1.0.5 -> v34.1.0.5
[00008631][03 06][00] v2.4.10.7 -> v2.4.10.7
[00008706][04 00][00] v1.29.0.51 -> v1.29.0.51
[00008814][05 00][00] v3.0.6.2 -> v3.0.6.2
[00021377][08 00][00] device not detected.
[00021466][09 00][00] v1.8.0.0 -> v1.8.0.0
[00021571][11 00][00] v3.8.15.4 -> v3.8.15.4
[00021731][12 00][00] v1.11.0.0 -> v1.11.0.0
[00021851][12 01][00] v1.11.0.0 -> v1.11.0.0
[00021971][12 02][00] v1.11.0.0 -> v1.11.0.0
[00022111][12 03][00] v1.11.0.0 -> v1.11.0.0
[00034683][15 00][00] device not detected.
[00034769][17 00][00] v1.1.0.4 -> v1.1.0.4
[00034910][17 01][00] v2.0.1.2 -> v2.0.1.2
[00034989][19 00][00] v1.0.8.96 -> v1.0.8.96
[00037057]Packet upgrade failed at version checking.



[00007530]========== remo-con disconnect. boot(15) ============
[00007676]Packet [C:\WM610_FW_V01.02.01.03.bin] detected, card sn [0x9c097ec9].
[00007794]Packet upgrade start...

[00007959]Packet checking...
[00008031]Packet upgrade failed at packet checking.



[00007629]========== remo-con disconnect. boot(15) ============
[00007769]Packet [C:\WM610_FW_V01.06.00.40.bin] detected, card sn [0x9c097ec9].
[00007996]Packet upgrade start...

[00008077]Packet checking...
[00008151]Packet vlink 01.06.0040 <-> 01.05.0030.
[00008233]Record vlink 01.04.0010 <-> 01.03.0000 (flow = 0).
[00008304]Done.

[00008379]Version checking[1]...
[00008465][01 00][00] v2.47.4492 -> v2.47.4492
[00008593][01 01][00] v2.47.4492 -> v2.47.4492
[00008692][03 05][00] v34.1.0.5 -> v34.1.0.5
[00008805][03 06][00] v2.4.10.7 -> v2.4.10.7
[00008888][04 00][00] v1.29.0.51 -> v1.29.0.51
[00008985][05 00][00] v3.0.6.2 -> v3.0.6.2
[00021566][08 00][00] device not detected.
[00021648][09 00][00] v1.8.0.0 -> v1.8.0.0
[00021765][11 00][00] v3.8.15.4 -> v3.8.15.4
[00021885][12 00][00] v1.11.0.0 -> v1.11.0.0
[00022005][12 01][00] v1.11.0.0 -> v1.11.0.0
[00022124][12 02][00] v1.11.0.0 -> v1.11.0.0
[00022244][12 03][00] v1.11.0.0 -> v1.11.0.0
[00034812][15 00][00] device not detected.
[00034904][17 00][00] v1.1.0.4 -> v1.1.0.4
[00035044][17 01][00] v2.0.1.2 -> v2.0.1.2
[00035124][19 00][00] v1.0.8.96 -> v1.0.8.96
[00037192]Packet upgrade failed at version checking.



[00007134]========== remo-con disconnect. boot(15) ============
[00007207]Packet [C:\WM610_FW_V01.06.00.40.bin] detected, card sn [0x1890ed54].
[00007283]Packet upgrade start...

[00007359]Packet checking...
[00007438]Packet vlink 01.06.0040 <-> 01.05.0030.
[00007506]Record vlink 01.04.0010 <-> 01.03.0000 (flow = 0).
[00007581]Done.

[00007652]Version checking[1]...
[00007728][01 00][00] v2.47.4492 -> v2.47.4492
[00007805][01 01][00] v2.47.4492 -> v2.47.4492
[00007915][03 05][00] v34.1.0.5 -> v34.1.0.5
[00008035][03 06][00] v2.4.10.7 -> v2.4.10.7
[00008113][04 00][00] v1.29.0.51 -> v1.29.0.51
[00008215][05 00][00] v3.0.6.2 -> v3.0.6.2
[00020790][08 00][00] device not detected.
[00020873][09 00][00] v1.8.0.0 -> v1.8.0.0
[00020993][11 00][00] v3.8.15.4 -> v3.8.15.4
[00021114][12 00][00] v1.11.0.0 -> v1.11.0.0
[00021254][12 01][00] v1.11.0.0 -> v1.11.0.0
[00021374][12 02][00] v1.11.0.0 -> v1.11.0.0
[00021614][12 03][00] v1.11.0.0 -> v1.11.0.0
[00034202][15 00][00] device not detected.
[00034313][17 00][00] v1.1.0.4 -> v1.1.0.4
[00034453][17 01][00] v2.0.1.2 -> v2.0.1.2
[00034543][19 00][00] v1.0.8.96 -> v1.0.8.96
[00036618]Packet upgrade failed at version checking.

tbui_stan.yahoo Posted at 2016-3-1 17:08
Hi Rich,

I've tried all of that and still no joy.

oh.. maybe you will have to be sending your drone to the DJI support center

tbui_stan.yahoo Posted at 2016-3-1 03:14
the following is the hidden log file. sorry, don't know how to upload it as a text file so have to c ...

     I am sorry to tell you this,  Your device will have to be sent in Now.  Whenever you see on lines  08 00 and 15 00  " Device Not Detected ' This in every situation I have encountered means the Video Transmission Board is Damaged ( Not sure Exact term for VTB).  Or severely corrupted.  The Transmitter being on during update may have corrupted the file badly . I am not sure.  Check all off the wiring from the Camera to the Gimbal  and make sure no pins are damaged where the  Camera and Gimbal Meet.

Sorry about this.  Check the above before sending in.  Keep us updated.

-Donnie



   

Donnie Posted at 2016-3-1 16:02
I am sorry to tell you this,  Your device will have to be sent in Now.  Whenever you see on li ...

Heips.

i have same problem. One think i do not understand. There is still link between I1 and Rc. I can start motors and gimbal is moving etc. But,  Ipad or many other tablets i have does not ask " do you trust..".  When failure start i could not update rc. I was able to go camera view, but there was message "disconnect". I tried update but i could not do it. And finally i could not even camera view in Dji go. I think HDMI module is kaput..

teknohile Posted at 2016-3-1 11:05
Heips.

i have same problem. One think i do not understand. There is still link between I1 and Rc. ...

Do the suggestions in Red first before anything else .  I think your Cable is bad !
I will do my best to help , but having a bit of trouble understanding your writing , ( Sorry)
Are you saying you cannot update your RC  Transmitter ?  Please list what Firmware  versions you have currently on the Aircraft- RC and Go App.

Remember your RC Does not always get an Update, sometimes it is only the aircraft.  Your firmware should look like this:
Aircraft  1.6.00.40
RC         1.5.70
App (Go)   2.6.0




***Uninsstall the DJI go app on your I pad, then Reinstall it .  This solves alot of problems and then I will know this is not the source of you problem.  This is simple.


Have you tried a different cable from Transmitter to the RC.  If not please do this,  GET a Good Quality APPLE CABLE  I think that is the message you are getting is saying the cable is not original apple and it may not be from a "Trusted " vendor.

Lets start with which firmware you have ?
Do you have Video Transmitting to I pad ?

Let me know -donnie

Donnie Posted at 2016-3-1 06:02
I am sorry to tell you this,  Your device will have to be sent in Now.  Whenever you see on li ...

Thanks.... not exactly what I was hoping to hear but at least it's something.

now

tbui_stan.yahoo Posted at 2016-3-1 11:51
Thanks.... not exactly what I was hoping to hear but at least it's something.

now

     Did you get a chance to check those cables, and Gimbal pins ? ( Whee the camera screws into gimbal, those pins get bent sometimes)  that is the only other thing I can think of.  I think when you inadvertently left that transmitter on it corrupted the  aircraft Firmware.  I have seen this before.  I think they should have some sort of RESET for the aircraft but unfortunately there is not anything.   

When you send it in, let me know the result please.  I am really sorry about this.  

Good Luck- donnie

hey donnie -

yeh, i checked the pins and cables.  I do think the firmware got corrupted because the RC was on.  Reached out to the support center in the US. Hopeful that this can be resolved.  Will keep you posted.

teknohile Posted at 2016-3-2 01:05
Heips.

i have same problem. One think i do not understand. There is still link between I1 and Rc. ...

I have exactly the same problem, excepting in going to camera view!  It shows to me the message "How to Connect" in the DJI GO, however I can still control the gimbal, start the engines and have full control of it basically.
It's so frustrated, how can DJI release a firmware that just brick you bird!! We're not talking about a 60 dollars quad! Please, DJI, take care about the issue!

rdsbira@gmail.c Posted at 2016-3-5 11:10
I have exactly the same problem, excepting in going to camera view!  It shows to me the message "H ...

When you did your Update was the Transmitter ON?  Let me know the exact problem and I will try to help you.  What aircraft as well?

-donnie

HI

DJI I have the same problem. I downloaded the software 1.60.40. Unzip to the original dji sd card. I put the camera and turned inspire 1. The remote controller was switched off. After 20 minutes, I heard dddddddddddddddddddddddd. Now I haven't the camera video. Before upgrading everything worked properly. HELP



[00007432]========== 2016.03.06 22:27:00. boot(15) ============
[00007601]Packet [C:\WM610_FW_V01.06.00.40.bin] detected, card sn [0x80ce04a6].
[00007686]Packet upgrade start...

[00007867]Packet checking...
[00007948]Packet vlink 01.06.0040 <-> 01.05.0030.
[00008033]Record vlink 01.04.0010 <-> 01.03.0000 (flow = 0).
[00008116]Done.

[00008205]Version checking[1]...
[00008290][01 00][00] v2.47.4492 -> v2.47.4492
[00008403][01 01][00] v2.47.4492 -> v2.47.4492
[00008535][03 05][00] v34.1.0.5 -> v34.1.0.5
[00008653][03 06][00] v2.4.10.7 -> v2.4.10.7
[00008753][04 00][00] v1.29.0.51 -> v1.29.0.51
[00008872][05 00][00] v3.0.6.2 -> v3.0.6.2
[00021450][08 00][00] device not detected.
[00021542][09 00][00] v1.8.0.0 -> v1.8.0.0
[00021652][11 00][00] v3.8.15.4 -> v3.8.15.4
[00021792][12 00][00] v1.11.0.0 -> v1.11.0.0
[00021932][12 01][00] v1.11.0.0 -> v1.11.0.0
[00022052][12 02][00] v1.11.0.0 -> v1.11.0.0
[00022171][12 03][00] v1.11.0.0 -> v1.11.0.0
[00034745][15 00][00] device not detected.
[00034850][17 00][00] v1.1.0.4 -> v1.1.0.4
[00034992][17 01][00] v2.0.1.2 -> v2.0.1.2
[00035085][19 00][00] v1.0.8.96 -> v1.0.8.96
[00037160]Packet upgrade failed at version checking.

mateuszczesak@g Posted at 2016-3-6 17:10
HI

DJI I have the same problem. I downloaded the software 1.60.40. Unzip to the original dji sd car ...

  I hate to tell you this ,  Your Aircraft must be sent in for service.  When the lines 0800 and 1500 say signal not detected it means the Video Transmission Logic Board failed.  I have never seen it recover without DJI Intervention.

Did you skip any updartes?  Say from like 1.3 to 1.6 ?   The transmitter being on can sometimes cause this but I know you said yours was off.  Please let me know of anything strange that May have occured so I can make a list of possible causes, then DJI can maybe have a soloution .  Thanks, and Sorry
You can jump   updates like 1.3 to 1.6  , play it smart and do them   ALL  in order !

I am sorry -  Good Luck   - Donnie

teknohile Posted at 2016-3-2 01:05
Heips.

i have same problem. One think i do not understand. There is still link between I1 and Rc. ...

When you get 8 and 15 you will have no video but you will still have RC control.
I am sorry and hopefully you have already contacted support.

rdsbira@gmail.c Posted at 2016-3-6 01:10
I have exactly the same problem, excepting in going to camera view!  It shows to me the message "H ...

If it says 'How to Connect" then that means your RC is not seeing the app. Try a different USB cable or different device. And if nothing else works than it could be a bad USB port on the RC.
If your using Android, you may need to enable developer options.

mateuszczesak@g Posted at 2016-3-7 07:10
HI

DJI I have the same problem. I downloaded the software 1.60.40. Unzip to the original dji sd car ...

Yes, you are getting the same corrupted video transmission module.
Try downgrading to 1.5 and see if it works. Then go back to 1.6 and if it still has 8 & 15 Device Not Detected then you will need to contact support.

DJI-Ken Posted at 2016-3-7 03:57
Yes, you are getting the same corrupted video transmission module.
Try downgrading to 1.5 and see  ...

I'm sorry but it does not work. Downgrade to 1.5 fails.

To my happened to me was the same and that the camera was broken.
I hope you can solve quickly. I spent two weeks and received a new camera.
Cheers

Donnie Posted at 2016-3-5 16:58
When you did your Update was the Transmitter ON?  Let me know the exact problem and I will try to h ...

Hi Donnie, the RC was off. Now I'm trying to go to firmware WM610_FW_V01.07.00.90.
My aircraft is Inspire 1.
hour later: the aircraft was updated successfully, but the DJI GO still not showing the video.

Result: Success.

========== 2014.01.01 00:00:03 remo-con disconnect======
Packet: WM610_FW_V01.04.00.10.bin
Upgrading ...
Result: Success.

========== 2014.01.01 00:00:06 remo-con disconnect======
Packet: WM610_FW_V01.06.00.40.bin
Upgrading ...
Result: Success.

========== 2014.01.01 00:00:08 remo-con disconnect======
Packet: WM610_FW_V01.06.00.40.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

========== 2014.01.01 00:00:07 remo-con disconnect======
Packet: WM610_FW_V01.05.00.30.bin
Upgrading ...
Result: Success.

========== 2014.01.01 00:00:07 remo-con disconnect======
Packet: WM610_FW_V01.07.00.90.bin
Upgrading ...
Result: Success.


This is ridiculous. I will never run a DJI update again.

Why DJI doesn't assume the responsibility of this bad firmware release? So frustrated, I will give up of DJI products.