alan_hunter1664
New
United Kingdom
Offline
|
I have been given a Phantom 2 vision. All systems work other that i'm struggling to get the Phantom to connect to my iPhone These are the observations and actions i've taken.
Observations
1. Camera switched to Wi-Fi and green light on (but not flashing)
2. Iphone connected to Phantom range extender 'Phantom_xxxxx'
3. Camera bound to range extender in DJI Vision App. As I didn't have the box with the QDI code so I had to scan the Phantom_xxxxx network to display the camera netwok mac address which it did so I'm assuming the Camera Wi-Fi ('F200_xxxxx') is working although not visible on any of my computers.
4. When I select camera through the DJI app the Range extender icon is highlighed blue but all other functions are disabled with the message 'Connection to Phantom Failed'.
5. I've tried two different iphones, ipad and an android device with the same results so don't think it is the app.
6. Camera will record when manually selected on the camera.
7. I can access the camera internal web page address 192.168.1.2 through my wi-fi scanner and everything looks normal.
8. Tried different switch on sequences but no difference.
9. Camera firmware updated to latest version.
10. Phantom firmwate updated to latest version (however, if I try and re-update it tells me it has failed but on re-boot everything looks ok and reports firmware at latest version)
The system is old so isn't realy cost effective to repair, i can get a functioning second hand one on ebay for the cost of a new camera, but I would be grateful if anyone has any ideas or suggestions prior to me giving up.
Alan
|
|