Dear all .
I use lightbridge with A2 om my s1000.
Software and live video is coming perfect when i use the app, but when i connect my blackpearl with external HDMI cable the app is freezing and i have no video at both screens...
Any idea please ?

Hi,
Lightbridge doesn't support an external signal output at the same time and obviously your blackpearl influences the original output.

DJI-Adela Posted at 2016-3-14 10:39
Hi,
Lightbridge doesn't support an external signal output at the same time and obviously your blackp ...

And what is the use of the HDMI port please ?

DJI-Adela Posted at 2016-3-14 10:39
Hi,
Lightbridge doesn't support an external signal output at the same time and obviously your blackp ...

And what is the use of the HDMI port please ?

nikolaospaschal Posted at 2016-3-15 02:00
And what is the use of the HDMI port please ?

Hello!
Please refer to page 9 of the Lightbridge Quick Start Guide in this webpage: http://dl.djicdn.com/downloads/l ... art_Guide_v1.06.pdf
You'll find that it states that the USB and HDMI output are mutually exclusive, the HDMI output overrides the USB output. If you use them at the same time, they may influence each other.

Yes but when i start only with HDMI i got no signal in Blackpearl screen...

Please check the HDMI cable and its connection. Can the USB port still work well separately?

Yes USB and Lightbridge app ia ok . HDMI NOT!!!

nikolaospaschal Posted at 2016-3-15 16:59
Yes USB and Lightbridge app ia ok . HDMI NOT!!!

I see...
If all the connection and cables are correct and in good condition, it should have the HDMI output.
Please check video sourcing setting. Enter DJI Lightbridge setting menu, tap "Video Source Setting" and select "HDMI/AV" as video source.

Yeap it worked finally !!!
Thanks

nikolaospaschal Posted at 2016-3-16 00:21
Yeap it worked finally !!!
Thanks

I'm glad to hear that, thanks for your positive feedback!