Please select Into the mobile phone version | Continue to access the computer ver.
Ronin M Follow Focus Mount and Lens Support
877 5 2016-3-19
Uploading and Loding Picture ...(0/1)
o(^-^)o
medavidson
lvl.1
United States
Offline

When I added the mount and rods (http://store.dji.com/product/15mm-rod-set), the lens support is no longer mountable.

The problem is that the screw that came with the lens support is not long enough when the mount and rods are attached.  This seems like a simple one.

Any ideas?

Mark



2016-3-19
Use props
medavidson
lvl.1
United States
Offline

Could it be that I need this:

http://www.bhphotovideo.com/c/pr ... rt_thumb_screw.html

Mark
2016-3-19
Use props
valealvarez.s96
lvl.4
Argentina
Offline

medavidson Posted at 2016-3-19 21:40
Could it be that I need this:

http://www.bhphotovideo.com/c/product/1070614-REG/dji_cp_zm_000098_le ...

I made my own FF rod for my Dji focus on a lathe, $70 is quite expensive for that thing.
2016-3-20
Use props
medavidson
lvl.1
United States
Offline

valealvarez.s96 Posted at 2016-3-21 01:58
I made my own FF rod for my Dji focus on a lathe, $70 is quite expensive for that thing.

Im past the expensive part, now I need to get to the solution part.  This seems not only a simple fix, but one the engineers at DJI must have considered.

I can't find anything on it anywhere.
2016-3-21
Use props
valealvarez.s96
lvl.4
Argentina
Offline

medavidson Posted at 2016-3-22 07:06
Im past the expensive part, now I need to get to the solution part.  This seems not only a simple  ...

Just drill it a few milimiters and then you are good with the screw, you can use sand paper too, it's aluminium, easy to work with
2016-3-22
Use props
DJI-Adela
DJI team

Hong Kong
Offline

This issue will be reported to our relevant Dept. for review. Thanks for your feedback!
2016-3-24
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules