martin
New
Sweden
Offline
|
Hi!
I´ve just made a swap, my Ronin-M to a Ronin.
After packing it out and doing a perfect balance of the camera, BMPCC + Sigma 18-35, the app says that the camera is unbanalced and needs to be rebalanced.
Pan and tilt has low values but the roll is always the problem where I get high motor readings, causing the Ronin to shut down after a while.
If turn down the stiffness on the roll motor it starts acting weared.
The pan and tilt motor moves freely but I can feel and hear a slight resistence in the roll motor.
Which I thinks is the problem.
The Ronin is updated with the latest firmware.
Any idea what´s causing the problem?
Thanks!
/Martin
|
|