s.gravit
lvl.4
Flight distance : 43074 ft
Canada
Offline
|
Hi , I have a phantom 3 standard for repairing.
custumer has broke the original camera appaired with remote on his phantom 3 standard
so we buy a new spare camera and instal on the drone. all the cable and antenna are correct
It 's not possible to bind the camera with the repeter inside the remote control.
the led on the remote stay red and donT go green proving that the camera has been paired with the repeater.
there is a new mac adress on the camera who is not connected to the repeter.
so is there a way to bind this new camera to the repeater.
on vision 2+ we can do than with no problem
on the dji go app it indiced to connect the camera and nacelle not linked....
I see that there is an ftp on the repeter 192.168.1.1, but it's not possible to get inside without the pass and the id.
maybe there is something to do with putty and ssh
Another thing , When I put back the old camera, the comunication work i have the image but the guimball donT move cause it's brocken.
something strange too , on the radio it seem impossible to do the wifi reset with the switching of s2 and right guimball button.I change the wifi setting with go app , the network change off name and pass , corect but the reset to the defaut setting is not working no big beep if succes...
even I cant bind the 5.8 ghz rc link to to the phantom
please dji is there a solution to change a camera on the phantom 3 std
thanks |
|
|