Is it possible to change the settings to FCC from CE? I need to boost the range of my P3S and i dont want the after market accessories to do that.

To my knowledge it isn't. FCC and CE is based on GPS, I think the whole Europe is in CE. Sweden is at least. I can get about 400-500 meters close to city and about 800-900 when I am in the outskirts.

Larsaunitz Posted at 2016-4-25 18:41
To my knowledge it isn't. FCC and CE is based on GPS, I think the whole Europe is in CE. Sweden is a ...

Phantom 2 vision plus has the option to switch on the controller.Other models are as you described

You could always buy the P3A or P3P which are marketed for hobbyists and professional with the greater range. The P3S is for beginners and has a shorter range and performance to match. It is best to read the specs before parting with the money.

anything new here? read a thread where they changed some code in linux, some worked others bricked the controller...

No you cannot change the FCC/CE settings.
The Advanced uses Lightbridge and would give you way for range than the Standard.

DJI-Ken Posted at 2016-7-11 20:12
No you cannot change the FCC/CE settings.
The Advanced uses Lightbridge and would give you way for r ...

thats true, but then again i still wonder, if the advanced/pro has 3,5km while CE compliant why is the standard limited to 500 when its original range is 1km (1,2km for the 4k)?!

You cant hence the regulations, when the same class drone has many times the range?

Mariuss Posted at 2016-7-12 02:52
thats true, but then again i still wonder, if the advanced/pro has 3,5km while CE compliant why is ...

It's based on regulations, the Standard and 3 4k are normal WiFi and that's what they are regulated to. The other aircraft use Lightbridge technology so it's not limited like those two.

DJI-Ken Posted at 2016-7-11 21:22
It's based on regulations, the Standard and 3 4k are normal WiFi and that's what they are regulate ...

thanks Ken!

Mariuss Posted at 2016-7-12 05:45
thanks Ken!

No problem at all.

Test CE to FCC: