Please select Into the mobile phone version | Continue to access the computer ver.
Find old firmware versions for rc?
1611 16 2016-4-26
Uploading and Loding Picture ...(0/1)
o(^-^)o
andi0047
lvl.1

Denmark
Offline

Hi there...


i have a problem upgrading my rc to newest version..
it has not been out of its box since i bought it and its now a little bit over a year old.. and it wont update to the newest firmware or do anything...


Does anyone know where to find old firmware versions so i can try to update it one version at a time to see if that will solve it..

i dont know what version it is currently on as the dji go app will not connect to it because the rc is before it was called "DJI GO"

Hope any one knows a solution..
2016-4-26
Use props
terrylewis
First Officer
Flight distance : 3517287 ft
  • >>>
United States
Offline

The upgrades are enumerated in the release notes here:
Inspire Release Notes

The RC upgrades were included with the aircraft firmware up through v1.3.0.00. That's why this firmware is still available on the Downloads page.

You should be able to upgrade to this version without stepping through the earlier versions.

After 1.3.0.00, the aircraft firmware no longer includes the RC firmware as it is updated via the GO app after 1.3.0.00...
2016-4-26
Use props
andi0047
lvl.1

Denmark
Offline

Ok, but i have tried updating my rc with 1.3.0.00 and it does not beep, give an output to th usb flash drive or anything else..
2016-4-26
Use props
DJI-BladeStrike
Second Officer
Flight distance : 872694 ft
  • >>>
United States
Offline

andi0047@gmail. Posted at 2016-4-26 10:04
Ok, but i have tried updating my rc with 1.3.0.00 and it does not beep, give an output to th usb fla ...

Make sure the bin is extracted to the root and usb drive is formatted in fat32
2016-4-26
Use props
Donnie
First Officer
Flight distance : 3636782 ft
United States
Offline

andi0047@gmail. Posted at 2016-4-26 12:04
Ok, but i have tried updating my rc with 1.3.0.00 and it does not beep, give an output to th usb fla ...

You must be using the correct 1.3 file did you use the 1.3 file with the C1 in front of it ?  This is the file you must get to before youc an use go app.

Here, try mine, it is for RC only. Let me know if it works, respond to me in the Reply please.

http://hypedphoto.com/dronevideo ... _FW_V01.03.0020.zip

2016-4-26
Use props
andi0047
lvl.1

Denmark
Offline

Donnie Posted at 2016-4-26 23:59
You must be using the correct 1.3 file did you use the 1.3 file with the C1 in front of it ?  This  ...

The USB is fat32, and i extract directly to the usb drive with the file you provided.. and it still just lights red and nothing happens... :-(

And also the RC is more than a year old and has not been used before now.. and it has never been linked to any AC... Is there some FW Version i need to go to before i can go to 1.3?
2016-4-26
Use props
andi0047
lvl.1

Denmark
Offline

See above...
2016-4-26
Use props
Donnie
First Officer
Flight distance : 3636782 ft
United States
Offline

andi0047@gmail. Posted at 2016-4-27 00:43
The USB is fat32, and i extract directly to the usb drive with the file you provided.. and it still ...

Are  you using a Mac by any chance ?  These are notorious for not formatting the SD card correctly.  If you do own a MAC device my best advise is to format on the SD card on a PC and then load my file, it should work .
To answer you question , this is the file 1.3 you need before you can update using the go app and do future updates to the RC, we must get this to work.  

You have the A model RC transmitter correct ?  

Let me know- donnie
2016-4-27
Use props
jasonmsitz
lvl.2

United States
Offline

Donnie Posted at 2016-4-27 05:59
You must be using the correct 1.3 file did you use the 1.3 file with the C1 in front of it ?  This  ...

I need your help one min of your time I'm even having trouble sending out a post,I'm having trouble rolling back my rc. 904 514 0188 jason thanks I'm holding my phone
2016-4-27
Use props
Donnie
First Officer
Flight distance : 3636782 ft
United States
Offline

jasonmsitz@gmai Posted at 2016-4-27 16:15
I need your help one min of your time I'm even having trouble sending out a post,I'm having troubl ...

Calling now

donnie
2016-4-27
Use props
terrylewis
First Officer
Flight distance : 3517287 ft
  • >>>
United States
Offline


The only version I can locate prior to v1.3.0 is this:

Updated -> Inspire 1 v1.2.1.06 All-in-one, includes RC

2016-4-28
Use props
Donnie
First Officer
Flight distance : 3636782 ft
United States
Offline

terrylewis Posted at 2016-4-28 08:27
The only version I can locate prior to v1.3.0 is this:
Inspire 1 v1.2.1.06 All-In-One, includes RC ...

I could not open that  link ( Or get the file )  Terry, I was going to save the file.  Just a FYI my man.
Am I missing something ....

donnie
2016-4-28
Use props
terrylewis
First Officer
Flight distance : 3517287 ft
  • >>>
United States
Offline

Donnie Posted at 2016-4-28 21:53
I could not open that  link ( Or get the file )  Terry, I was going to save the file.  Just a FYI m ...

Sorry, fat fingers..... updated link...
2016-4-28
Use props
DJI-BladeStrike
Second Officer
Flight distance : 872694 ft
  • >>>
United States
Offline

Please use another USB drive if you access to it. You do need to load .30 only
2016-4-28
Use props
Donnie
First Officer
Flight distance : 3636782 ft
United States
Offline

terrylewis Posted at 2016-4-28 09:49
Sorry, fat fingers..... updated link...

Thanks, I just want to keep it for my record's in case someone needs it.

Stay well My friend- donnie
2016-4-28
Use props
Donnie
First Officer
Flight distance : 3636782 ft
United States
Offline

Did you get it working?

donnie
2016-4-28
Use props
andi0047
lvl.1

Denmark
Offline

Sorry for not getting back on this... Totally forgot..


But I send it in to DJI for repair, and they did infact find a broken board inside..(which explains why it would not download any firmware from either usb or sd) And replaced the whole unit :-)
2016-7-15
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules