Hi all
since I slowly get allright with the fact that I would have to buy a plenty of TB47s / TB48s i noticed, that the purchase of the "SRW-60G " will also be mandatory if the m600 will be combined with the ronin mx (which is by the way the only combination that justifyes to buy the m600 imo)...

BUT: Has anybod a guess in which pricerange this SRW-60G could be?
Will it be a few hundrets or another 2000 to 3000 Dollars we would have to spend...
Do you see other upcoming costs if purchasing the m600 in Combo with the Ronin MX or are we done then?

Cheers Florian

DJI is still working with some things on the SRW-60G BUT the M600 has a HDMI cable that would input the video from the camera on the MX. You just wouldn't have 360 degree pans.

DJI-Ken Posted at 2016-5-9 16:39
DJI is still working with some things on the SRW-60G BUT the M600 has a HDMI cable that would input  ...

Thank you Ken - this helps a lot!
In fact this means that it would also be a Option to use a hdmi converter and send the V-Signal with a 10mw Transmitter / Receiver up to the M600 to Close the lag until the SRW-60G is released...
I also got the "rumor" that it will be arround 300$ which would be a fair deal...
Cheers Florian

Heliflo Posted at 2016-5-10 03:27
Thank you Ken - this helps a lot!
In fact this means that it would also be a Option to use a hdmi  ...

There really is no video lag with Lightbridge2. You can also have 2 video sources. The main gimbal camera and a FPV camera.

DJI-Ken Posted at 2016-5-9 15:33
There really is no video lag with Lightbridge2. You can also have 2 video sources. The main gimbal ...

Hi Ken, what about how to mount on the Matrice 600 the Zenmuses X5/X3 or XT, any news?

leoamartinez@gm Posted at 2016-5-24 05:22
Hi Ken, what about how to mount on the Matrice 600 the Zenmuses X5/X3 or XT, any news?

No word on pricing or availability yet but it should be soon. here's some photos of a production unit courtesy of Bladestrike.

DJI-Ken Posted at 2016-5-23 17:34
No word on pricing or availability yet but it should be soon. here's some photos of a production un ...

Thank you, another question, if i want to assemble a Matrice 600, tu use an XT when the base its available, do i need a lightbridge or it comes ready to flight?

leoamartinez@gm Posted at 2016-5-24 05:45
Thank you, another question, if i want to assemble a Matrice 600, tu use an XT when the base its a ...

It comes with everything to fly, you just need your phone/tablet. Aircraft, R/C,  Lightbridge2, A3 flight controller, 6 batteries, and two charging hubs are included.

DJI-Ken Posted at 2016-5-23 17:49
It comes with everything to fly, you just need your phone/tablet. Aircraft, R/C,  Lightbridge2, A3 ...

Thank you!!! Will following DJi page for future products.

Regards,

Leo Martinez

leoamartinez@gm Posted at 2016-5-24 05:50
Thank you!!! Will following DJi page for future products.

Regards,

No problem at all. If you do get one just make sure you follow the instructions. most importantly is the arms/motors are positioned correctly. with CW and CCW positioning.

DJI-Ken Posted at 2016-5-23 17:58
No problem at all. If you do get one just make sure you follow the instructions. most importantly  ...

Mine its on its way, thanks for the suggestion!

leoamartinez@gm Posted at 2016-5-24 05:59
Mine its on its way, thanks for the suggestion!

That's awesome. Congratulations, you are going to be pleasantly surprised how incredible is.

DJI-Ken Posted at 2016-5-23 18:08
That's awesome. Congratulations, you are going to be pleasantly surprised how incredible is.

All accessories on sale now, excellent technology!!!

leoamartinez@gm Posted at 2016-6-10 20:22
All accessories on sale now, excellent technology!!!

I think it's great that an extra set of batteries is $799

what about the second Controller (for the camera Operator to controll the Ronin MX) - I was assuming that a spare inspire remote would work - seems that it will NOT work...
Does it really make sense to configure the M600 / Ronin MX Bundle WITHOUT a REMOTE for the Camera Operator...I think it should be clear for anybody that I will fly a Setup like this not by my own as a single Operator....

Heliflo Posted at 2016-6-23 05:29
what about the second Controller (for the camera Operator to controll the Ronin MX) - I was assuming ...

Because the M600 uses Lightbridge 2, you would need a Lightbridge 2 RC. I know it does not seem much, but the SDI output does make a difference.