david.wardell Posted at 2016-5-16 01:42
You can add me to those who can't connect with just one iOS device. Can connect with iPhone 6s, iPad ...

If you can please get a video clip of this it would help.
And I'm sorry you are having difficulties connecting.

david.wardell Posted at 2016-5-16 02:06
I tried to connect with Phantom when it had previous firmware (1.6 something plus equivalent RC upda ...

Can you post a video like I've asked others to do.

joakim Posted at 2016-5-16 04:27
DJI-KEN

I hope you can help me. I have since todays morning trying to get my two days old DJI P3 Pr ...

Your issue is different than the others are having, you can still connect to the app but the firmware is not matched from your aircraft to your RC. If you updated the aircraft and it's on 1.8 and the app is asking you to update the RC to 1.6, then please update the RC to 1.6 then you will have full control.And I cannot view your screenshots. To post a photo, use the advanced tab then chose the photo icon.

joakim Posted at 2016-5-15 22:27
DJI-KEN

I hope you can help me. I have since todays morning trying to get my two days old DJI P3 Pr ...

DJI-Ken
I have uploaded the pictures one by one. My problem is that the app doesnt tells me to upgrade nor showing firmvare version as you can see at the pictures.


I think there is something wrong with the DJI Go version. Is there anya chance to try with an older version and get the app telling me to upgrade?

DJI Ken, here's the video showing what happens when following your instructions. Everything seems to be in place except you don't get the 'Camera' button.

My C1 screencapture

Now here's weird thing. Read this on the inspire pilots forum -
curso88 said: ↑
This bug has detected in the APP DJI GO & GO GEO Beta using the Inspire 1 V2, the Phantom 3 Profesional and the DJI OSMO using the App in the iPad Air 2, iPad 4 and two iPhone 6 Plus with IOS 9.3.1 and the current version from App Store DJI GO v2.8.1 and the current release of DJI GO GEO Beta
Bug description
If you has updated the app DJI GO & GO GEO from previous app installed this bug not appear, but if you delete the app DJI GO & GO GEO Beta and re install, the app indicates “unknown version” in the About section.
Tested with two iPad and two iPhone 6 Plus with IOs 9.3.1 and the current DJI GO v2.8.1 from the app store

And a reply -
Make sure the App is connected to the Internet. Then have the Aircraft, RC powered up and allow the DJI servers a few minutes to 'catch up' and read you version number and compare it with current versions data held on their servers.

So i switched everything on. After about 10 mins DJI GO app reported I could connect to the camera of the Phantom 3 Standard. I have a Phantom 3 Professional. I'm still waiting ...

... and here's the other weird thing. If I make sure DJI GO remains requesting connection to P3 Professional, the C1 module in Settings -> About disappears in about 3 minutes.

david.wardell Posted at 2016-5-16 17:12
DJI Ken, here's the video showing what happens when following your instructions. Everything seems to ...

David,
Thank you so much, this is EXACTLY what I was asking for. For everyone else, if you can please do the same as this video. This is exactly what i need to forward on.

joakim Posted at 2016-5-16 12:49
DJI-Ken
I have uploaded the pictures one by one. My problem is that the app doesnt tells me to upgr ...

Do you have internet connection on your device, if it still shows unknown but you are not getting a RC signal lost warning then you are updated on everything.
You can delete and reinstall the app and if it still does not show the version numbers then it may be a server issue.

tiscali Posted at 2016-5-16 21:25
Now here's weird thing. Read this on the inspire pilots forum -
curso88 said: ↑
This bug has detect ...

Can you please post a video of your aircraft and everything powered up. The show going into the app and not connecting to P3P but being able to connect to P3S. I will forward that on.
Thanks

DJI-Ken Posted at 2016-5-16 16:19
Do you have internet connection on your device, if it still shows unknown but you are not getting  ...

I have both wifi and Simcard in my iPad. I have reinstalled my app. Reset the iPad and restarted before installing the app again.

Same result: RC signal lost warning. I think my RC still has wrong version.
In "The hat" function it says firmware unknown and also in the app.

joakim Posted at 2016-5-16 22:30
I have both wifi and Simcard in my iPad. I have reinstalled my app. Reset the iPad and restarted b ...

Yes, if you see RC signal lost then they are not on matched firmware.
I still don't know which one is updated. Did you do the SD card firmware update on your aircraft OR did you update the RC when the app told you the RC requires an update?
Let me know which one you updated and then I'll guide you and get you on matched firmware.

DJI-Ken Posted at 2016-5-16 16:42
Yes, if you see RC signal lost then they are not on matched firmware.
I still don't know which one ...

I started with the copter direct on the sd card. The log files looks ok.








Logfile:
[00016799]========== remo-con disconnect. boot(15) ============
[00016935]Firmware [C:\PDM368Fw3.bin] detected, card sn [0x50ce016d].
[00016972][08 00] Firmware upgrade start...
[00523950][08 00] Firmware upgrade finished successfully.
[00523995]Done.

[00013107]========== remo-con disconnect. boot(15) ============
[00013146]Packet [C:\P3X_FW_V01.08.0080.bin] detected, card sn [0x2857532b].
[00013183]Packet upgrade start...

[00013227]Packet checking...
[00013266]Packet vlink 01.08.0080 <-> 01.07.0060.
[00013336]Done.

[00013372]Version checking[1]...
[00013458][03 05][00] v34.2.0.9 -> v34.2.0.9
[00013538][03 06][00] v2.4.0.4 -> v2.4.14.5 need upgrade.
[00013586][04 00][00] v1.41.0.0 -> v1.44.0.0 need upgrade.
[00013698][11 00][00] v1.7.0.0 -> v1.7.15.1 need upgrade.
[00013818][12 00][00] v1.10.0.0 -> v1.10.0.0
[00013901][12 01][00] v1.10.0.0 -> v1.10.0.0
[00013991][12 02][00] v1.10.0.0 -> v1.10.0.0
[00014071][12 03][00] v1.10.0.0 -> v1.10.0.0
[00014204][15 00][00] v1.1.2.0 -> v1.1.2.0
[00014306][17 00][00] v1.1.1.7 -> v1.1.1.7
[00014447][17 01][00] v1.0.2.7 -> v1.0.2.7
[00014496][19 00][00] v255.255.255.254 -> v1.0.8.96
[00014535][01 00][00] v1.25.4236 -> v1.30.5036 need upgrade
[00014577][01 01][00] v1.25.4236 -> v1.30.5036 need upgrade
[00014629][08 00][00] v0.13.0.7 -> v0.13.0.7
[00014677][09 00][00] v2.13.0.0 -> v3.0.0.10 need upgrade.
[00014713]Done.

[00016754]Waiting for user confirm...
[00026789]Timeout, start upgrade automatically.

[00026863]Firmware upgrading[1]...
[00038360][01 00] Firmware upgrade start...
[00012248][01 00] Firmware upgrade finished successfully.
[00012299]Done.

[00012335]Packet [C:\P3X_FW_V01.08.0080.bin] resumed, card sn [0x2857532b].
[00012376]Packet vlink 01.08.0080 <-> 01.07.0060.
[00012450]Version checking[2]...
[00012533][03 05][00] v34.2.0.9 -> v34.2.0.9
[00012612][03 06][00] v2.4.0.4 -> v2.4.14.5 need upgrade.
[00012662][04 00][00] v1.41.0.0 -> v1.44.0.0 need upgrade.
[00012774][11 00][00] v1.7.0.0 -> v1.7.15.1 need upgrade.
[00012986][12 00][00] v1.10.0.0 -> v1.10.0.0
[00013086][12 01][00] v1.10.0.0 -> v1.10.0.0
[00013162][12 02][00] v1.10.0.0 -> v1.10.0.0
[00013254][12 03][00] v1.10.0.0 -> v1.10.0.0
[00013391][15 00][00] v1.1.2.0 -> v1.1.2.0
[00013501][17 00][00] v1.1.1.7 -> v1.1.1.7
[00013615][17 01][00] v1.0.2.7 -> v1.0.2.7
[00013672][19 00][00] v255.255.255.254 -> v1.0.8.96
[00013711][01 00][05] v1.30.5036 -> v1.30.5036
[00013755][01 01][00] v1.25.4236 -> v1.30.5036 need upgrade
[00013810][08 00][00] v0.13.0.7 -> v0.13.0.7
[00013872][09 00][00] v2.13.0.0 -> v3.0.0.10 need upgrade.
[00013916]Done.

[00013954]Firmware upgrading[2]...
[00014094][01 01] Firmware upgrade start...
[00044396][01 01] Firmware upgrade finished successfully.
[00044452][11 00] Firmware upgrade start...
[00092113][11 00] Firmware upgrade finished successfully.
[00092357][03 06] Firmware upgrade start...
[00394036][03 06] Firmware upgrade finished successfully.
[00394097][09 00] Firmware upgrade start...
[00446159][09 00] Firmware upgrade finished successfully.
[00446233][04 00] Firmware upgrade start...
[00504981][04 00] Firmware upgrade finished successfully.
[00505023]Done.

[00505070]Version checking[3]...
[00505139][03 05][00] v34.2.0.9 -> v34.2.0.9
[00505201][03 06][05] v2.4.14.5 -> v2.4.14.5
[00505280][04 00][05] v1.44.0.0 -> v1.44.0.0
[00505380][11 00][05] v1.7.15.1 -> v1.7.15.1
[00505473][12 00][00] v1.10.0.0 -> v1.10.0.0
[00505548][12 01][00] v1.10.0.0 -> v1.10.0.0
[00505634][12 02][00] v1.10.0.0 -> v1.10.0.0
[00505709][12 03][00] v1.10.0.0 -> v1.10.0.0
[00505859][15 00][00] v1.1.2.0 -> v1.1.2.0
[00505943][17 00][00] v1.1.1.7 -> v1.1.1.7
[00506062][17 01][00] v1.0.2.7 -> v1.0.2.7
[00506127][19 00][00] v255.255.255.254 -> v1.0.8.96
[00506167][01 00][05] v1.30.5036 -> v1.30.5036
[00506204][01 01][05] v1.30.5036 -> v1.30.5036
[00506289][08 00][00] v0.13.0.7 -> v0.13.0.7
[00506347][09 00][05] v3.0.0.10 -> v3.0.0.10
[00506384]Packet upgrade finish successfully.



[00013658]========== remo-con disconnect. boot(15) ============
[00013697]Packet [C:\P3X_FW_V01.07.0060.bin] detected, card sn [0x2857532b].
[00013735]Packet upgrade start...

[00013784]Packet checking...
[00013826]Packet vlink 01.07.0060 <-> 01.06.0040.
[00013866]Record vlink 01.08.0080 <-> 01.07.0060 (flow = 1).
[00013905]Done.

[00013951]Version checking[1]...
[00014034][03 05][00] v34.2.0.9 -> v34.2.0.9
[00014119][03 06][00] v2.4.14.5 -> v2.4.13.0
[00014168][04 00][00] v1.44.0.0 -> v1.41.0.0
[00014280][11 00][00] v1.7.15.1 -> v1.7.15.1
[00014399][12 00][00] v1.10.0.0 -> v1.10.0.0
[00014507][12 01][00] v1.10.0.0 -> v1.10.0.0
[00014600][12 02][00] v1.10.0.0 -> v1.10.0.0
[00014685][12 03][00] v1.10.0.0 -> v1.10.0.0
[00014834][15 00][00] v1.1.2.0 -> v1.1.2.0
[00014924][17 00][00] v1.1.1.7 -> v1.1.1.7
[00015052][17 01][00] v1.0.2.7 -> v1.0.2.7
[00015119][19 00][00] v255.255.255.254 -> v1.0.8.96
[00015159][01 00][00] v1.30.5036 -> v1.29.4920 need upgrade
[00015201][01 01][00] v1.30.5036 -> v1.29.4920 need upgrade
[00015271][08 00][00] v0.13.0.7 -> v0.13.0.7
[00015338][09 00][00] v3.0.0.10 -> v2.13.0.0
[00015379]Done.

[00017427]Waiting for user confirm...
[00027469]Timeout, start upgrade automatically.

[00027547]Firmware upgrading[1]...
[00027684][01 01] Firmware upgrade start...
[00057976][01 01] Firmware upgrade finished successfully.
[00058018]Done.

[00058061]Version checking[2]...
[00058136][03 05][00] v34.2.0.9 -> v34.2.0.9
[00058223][03 06][00] v2.4.14.5 -> v2.4.13.0
[00058276][04 00][00] v1.44.0.0 -> v1.41.0.0 need upgrade.
[00058402][11 00][00] v1.7.15.1 -> v1.7.15.1
[00058506][12 00][00] v1.10.0.0 -> v1.10.0.0
[00058603][12 01][00] v1.10.0.0 -> v1.10.0.0
[00058711][12 02][00] v1.10.0.0 -> v1.10.0.0
[00058810][12 03][00] v1.10.0.0 -> v1.10.0.0
[00058967][15 00][00] v1.1.2.0 -> v1.1.2.0
[00059045][17 00][00] v1.1.1.7 -> v1.1.1.7
[00059165][17 01][00] v1.0.2.7 -> v1.0.2.7
[00059221][19 00][00] v255.255.255.254 -> v1.0.8.96
[00059369][01 00][00] v1.30.5036 -> v1.29.4920 need upgrade
[00059410][01 01][05] v1.29.4920 -> v1.29.4920
[00059468][08 00][00] v0.13.0.7 -> v0.13.0.7
[00059522][09 00][00] v3.0.0.10 -> v2.13.0.0
[00059563]Done.

[00059603]Firmware upgrading[2]...
[00059675][04 00] Firmware upgrade start...
[00118259][04 00] Firmware upgrade finished successfully.
[00118302]Done.

[00118341]Version checking[3]...
[00118425][03 05][00] v34.2.0.9 -> v34.2.0.9
[00118505][03 06][00] v2.4.14.5 -> v2.4.13.0
[00118565][04 00][05] v1.41.0.0 -> v1.41.0.0
[00118685][11 00][00] v1.7.15.1 -> v1.7.15.1
[00118789][12 00][00] v1.10.0.0 -> v1.10.0.0
[00118893][12 01][00] v1.10.0.0 -> v1.10.0.0
[00118973][12 02][00] v1.10.0.0 -> v1.10.0.0
[00119049][12 03][00] v1.10.0.0 -> v1.10.0.0
[00119196][15 00][00] v1.1.2.0 -> v1.1.2.0
[00119310][17 00][00] v1.1.1.7 -> v1.1.1.7
[00119430][17 01][00] v1.0.2.7 -> v1.0.2.7
[00119485][19 00][00] v255.255.255.254 -> v1.0.8.96
[00119534][01 00][00] v1.30.5036 -> v1.29.4920 need upgrade
[00119573][01 01][05] v1.29.4920 -> v1.29.4920
[00119626][08 00][00] v0.13.0.7 -> v0.13.0.7
[00119685][09 00][00] v3.0.0.10 -> v2.13.0.0
[00119730]Done.

[00119770]Firmware upgrading[3]...
[00131127][01 00] Firmware upgrade start...
[00012135][01 00] Firmware upgrade finished successfully.
[00012179]Done.

[00012220]Packet [C:\P3X_FW_V01.07.0060.bin] resumed, card sn [0x2857532b].
[00012267]Packet vlink 01.07.0060 <-> 01.06.0040.
[00012319]Record vlink 01.08.0080 <-> 01.07.0060 (flow = 1).
[00012360]Version checking[2]...
[00012435][03 05][00] v34.2.0.9 -> v34.2.0.9
[00012515][03 06][00] v2.4.14.5 -> v2.4.13.0
[00012569][04 00][05] v1.41.0.0 -> v1.41.0.0
[00012697][11 00][00] v1.7.15.1 -> v1.7.15.1
[00012784][12 00][00] v1.10.0.0 -> v1.10.0.0
[00012883][12 01][00] v1.10.0.0 -> v1.10.0.0
[00012983][12 02][00] v1.10.0.0 -> v1.10.0.0
[00013064][12 03][00] v1.10.0.0 -> v1.10.0.0
[00013212][15 00][00] v1.1.2.0 -> v1.1.2.0
[00013424][17 00][00] v1.1.1.7 -> v1.1.1.7
[00013559][17 01][00] v1.0.2.7 -> v1.0.2.7
[00013614][19 00][00] v255.255.255.254 -> v1.0.8.96
[00013660][01 00][05] v1.29.4920 -> v1.29.4920
[00013701][01 01][05] v1.29.4920 -> v1.29.4920
[00013766][08 00][00] v0.13.0.7 -> v0.13.0.7
[00013834][09 00][00] v3.0.0.10 -> v2.13.0.0
[00013875]Packet upgrade finish successfully.



[00013499]========== 2016.05.15 10:43:27. boot(15) ============
[00013543]Packet [C:\P3X_FW_V01.07.0060.bin] detected, card sn [0x2857532b].
[00013588]Packet upgrade start...

[00013634]Packet checking...
[00013681]Packet vlink 01.07.0060 <-> 01.06.0040.
[00013727]Record vlink 01.08.0080 <-> 01.07.0060 (flow = 1).
[00013780]Done.

[00013823]Version checking[1]...
[00013913][03 05][00] v34.2.0.9 -> v34.2.0.9
[00014011][03 06][00] v2.4.14.5 -> v2.4.13.0
[00014060][04 00][00] v1.41.0.0 -> v1.41.0.0
[00014177][11 00][00] v1.7.15.1 -> v1.7.15.1
[00014265][12 00][00] v1.10.0.0 -> v1.10.0.0
[00014365][12 01][00] v1.10.0.0 -> v1.10.0.0
[00014465][12 02][00] v1.10.0.0 -> v1.10.0.0
[00014565][12 03][00] v1.10.0.0 -> v1.10.0.0
[00014719][15 00][00] v1.1.2.0 -> v1.1.2.0
[00014821][17 00][00] v1.1.1.7 -> v1.1.1.7
[00014961][17 01][00] v1.0.2.7 -> v1.0.2.7
[00015032][19 00][00] v255.255.255.254 -> v1.0.8.96
[00015074][01 00][00] v1.29.4920 -> v1.29.4920
[00015116][01 01][00] v1.29.4920 -> v1.29.4920
[00015194][08 00][00] v0.13.0.7 -> v0.13.0.7
[00015251][09 00][00] v3.0.0.10 -> v2.13.0.0
[00015297]Packet upgrade cancelled at version checking.



[00013968]========== remo-con disconnect. boot(15) ============
[00014010]Packet [C:\P3X_FW_V01.08.0080.bin] detected, card sn [0x2857532b].
[00014056]Packet upgrade start...

[00014105]Packet checking...
[00014150]Packet vlink 01.08.0080 <-> 01.07.0060.
[00014191]Record vlink 01.08.0080 <-> 01.07.0060 (flow = 0).
[00014231]Done.

[00014283]Version checking[1]...
[00014375][03 05][00] v34.2.0.9 -> v34.2.0.9
[00014575][03 06][00] v2.4.14.5 -> v2.4.14.5
[00014639][04 00][00] v1.41.0.0 -> v1.44.0.0 need upgrade.
[00014756][11 00][00] v1.7.15.1 -> v1.7.15.1
[00014845][12 00][00] v1.10.0.0 -> v1.10.0.0
[00014936][12 01][00] v1.10.0.0 -> v1.10.0.0
[00015045][12 02][00] v1.10.0.0 -> v1.10.0.0
[00015151][12 03][00] v1.10.0.0 -> v1.10.0.0
[00015304][15 00][00] v1.1.2.0 -> v1.1.2.0
[00015404][17 00][00] v1.1.1.7 -> v1.1.1.7
[00015550][17 01][00] v1.0.2.7 -> v1.0.2.7
[00015610][19 00][00] v255.255.255.254 -> v1.0.8.96
[00015660][01 00][00] v1.29.4920 -> v1.30.5036 need upgrade
[00015701][01 01][00] v1.29.4920 -> v1.30.5036 need upgrade
[00015761][08 00][00] v0.13.0.7 -> v0.13.0.7
[00015829][09 00][00] v3.0.0.10 -> v3.0.0.10
[00015874]Done.

[00017923]Waiting for user confirm...
[00027967]Timeout, start upgrade automatically.

[00028055]Firmware upgrading[1]...
[00039392][01 00] Firmware upgrade start...
[00012131][01 00] Firmware upgrade finished successfully.
[00012189]Done.

[00012249]Packet [C:\P3X_FW_V01.08.0080.bin] resumed, card sn [0x2857532b].
[00012296]Packet vlink 01.08.0080 <-> 01.07.0060.
[00012347]Record vlink 01.08.0080 <-> 01.07.0060 (flow = 0).
[00012388]Version checking[2]...
[00012476][03 05][00] v34.2.0.9 -> v34.2.0.9
[00012556][03 06][00] v2.4.14.5 -> v2.4.14.5
[00012605][04 00][00] v1.41.0.0 -> v1.44.0.0 need upgrade.
[00012716][11 00][00] v1.7.15.1 -> v1.7.15.1
[00012836][12 00][00] v1.10.0.0 -> v1.10.0.0
[00012911][12 01][00] v1.10.0.0 -> v1.10.0.0
[00013016][12 02][00] v1.10.0.0 -> v1.10.0.0
[00013090][12 03][00] v1.10.0.0 -> v1.10.0.0
[00013246][15 00][00] v1.1.2.0 -> v1.1.2.0
[00013326][17 00][00] v1.1.1.7 -> v1.1.1.7
[00013446][17 01][00] v1.0.2.7 -> v1.0.2.7
[00013511][19 00][00] v255.255.255.254 -> v1.0.8.96
[00013555][01 00][05] v1.30.5036 -> v1.30.5036
[00013599][01 01][00] v1.29.4920 -> v1.30.5036 need upgrade
[00013655][08 00][00] v0.13.0.7 -> v0.13.0.7
[00013711][09 00][00] v3.0.0.10 -> v3.0.0.10
[00013756]Done.

[00013923]Firmware upgrading[2]...
[00014082][01 01] Firmware upgrade start...
[00044401][01 01] Firmware upgrade finished successfully.
[00044477][04 00] Firmware upgrade start...
[00103306][04 00] Firmware upgrade finished successfully.
[00103354]Done.

[00103399]Version checking[3]...
[00103482][03 05][00] v34.2.0.9 -> v34.2.0.9
[00103563][03 06][00] v2.4.14.5 -> v2.4.14.5
[00103618][04 00][05] v1.44.0.0 -> v1.44.0.0
[00103743][11 00][00] v1.7.15.1 -> v1.7.15.1
[00103837][12 00][00] v1.10.0.0 -> v1.10.0.0
[00103937][12 01][00] v1.10.0.0 -> v1.10.0.0
[00104038][12 02][00] v1.10.0.0 -> v1.10.0.0
[00104112][12 03][00] v1.10.0.0 -> v1.10.0.0
[00104288][15 00][00] v1.1.2.0 -> v1.1.2.0
[00104394][17 00][00] v1.1.1.7 -> v1.1.1.7
[00104512][17 01][00] v1.0.2.7 -> v1.0.2.7
[00104577][19 00][00] v255.255.255.254 -> v1.0.8.96
[00104640][01 00][05] v1.30.5036 -> v1.30.5036
[00104685][01 01][05] v1.30.5036 -> v1.30.5036
[00104745][08 00][00] v0.13.0.7 -> v0.13.0.7
[00104816][09 00][00] v3.0.0.10 -> v3.0.0.10
[00104864]Packet upgrade finish successfully.



[00013552]========== remo-con disconnect. boot(15) ============
[00013602]Packet [C:\P3X_FW_V01.08.0080.bin] detected, card sn [0x2857532b].
[00013649]Packet upgrade start...

[00013697]Packet checking...
[00013744]Packet vlink 01.08.0080 <-> 01.07.0060.
[00013793]Record vlink 01.08.0080 <-> 01.07.0060 (flow = 0).
[00013837]Done.

[00013883]Version checking[1]...
[00013972][03 05][00] v34.2.0.9 -> v34.2.0.9
[00014071][03 06][00] v2.4.14.5 -> v2.4.14.5
[00014130][04 00][00] v1.44.0.0 -> v1.44.0.0
[00014255][11 00][00] v1.7.15.1 -> v1.7.15.1
[00014352][12 00][00] v1.10.0.0 -> v1.10.0.0
[00014435][12 01][00] v1.10.0.0 -> v1.10.0.0
[00014533][12 02][00] v1.10.0.0 -> v1.10.0.0
[00014632][12 03][00] v1.10.0.0 -> v1.10.0.0
[00014767][15 00][00] v1.1.2.0 -> v1.1.2.0
[00014844][17 00][00] v1.1.1.7 -> v1.1.1.7
[00014962][17 01][00] v1.0.2.7 -> v1.0.2.7
[00015020][19 00][00] v255.255.255.254 -> v1.0.8.96
[00015173][01 00][00] v1.30.5036 -> v1.30.5036
[00015224][01 01][00] v1.30.5036 -> v1.30.5036
[00015289][08 00][00] v0.13.0.7 -> v0.13.0.7
[00015361][09 00][00] v3.0.0.10 -> v3.0.0.10
[00015404]Packet upgrade cancelled at version checking.



[00013613]========== remo-con disconnect. boot(15) ============
[00013660]Packet [C:\P3X_FW_V01.07.0060.bin] detected, card sn [0x2857532b].
[00013706]Packet upgrade start...

[00013761]Packet checking...
[00013808]Packet vlink 01.07.0060 <-> 01.06.0040.
[00013860]Record vlink 01.08.0080 <-> 01.07.0060 (flow = 1).
[00013906]Done.

[00013959]Version checking[1]...
[00014034][03 05][00] v34.2.0.9 -> v34.2.0.9
[00014114][03 06][00] v2.4.14.5 -> v2.4.13.0
[00014166][04 00][00] v1.44.0.0 -> v1.41.0.0
[00014292][11 00][00] v1.7.15.1 -> v1.7.15.1
[00014381][12 00][00] v1.10.0.0 -> v1.10.0.0
[00014481][12 01][00] v1.10.0.0 -> v1.10.0.0
[00014585][12 02][00] v1.10.0.0 -> v1.10.0.0
[00014681][12 03][00] v1.10.0.0 -> v1.10.0.0
[00014829][15 00][00] v1.1.2.0 -> v1.1.2.0
[00014919][17 00][00] v1.1.1.7 -> v1.1.1.7
[00015037][17 01][00] v1.0.2.7 -> v1.0.2.7
[00015116][19 00][00] v255.255.255.254 -> v1.0.8.96
[00015162][01 00][00] v1.30.5036 -> v1.29.4920 need upgrade
[00015208][01 01][00] v1.30.5036 -> v1.29.4920 need upgrade
[00015296][08 00][00] v0.13.0.7 -> v0.13.0.7
[00015356][09 00][00] v3.0.0.10 -> v2.13.0.0
[00015401]Done.

[00017456]Waiting for user confirm...
[00027502]Timeout, start upgrade automatically.

[00027606]Firmware upgrading[1]...
[00027748][01 01] Firmware upgrade start...
[00058051][01 01] Firmware upgrade finished successfully.
[00058099]Done.

[00058149]Version checking[2]...
[00058235][03 05][00] v34.2.0.9 -> v34.2.0.9
[00058315][03 06][00] v2.4.14.5 -> v2.4.13.0
[00058370][04 00][00] v1.44.0.0 -> v1.41.0.0
[00058495][11 00][00] v1.7.15.1 -> v1.7.15.1
[00058584][12 00][00] v1.10.0.0 -> v1.10.0.0
[00058684][12 01][00] v1.10.0.0 -> v1.10.0.0
[00058784][12 02][00] v1.10.0.0 -> v1.10.0.0
[00059005][12 03][00] v1.10.0.0 -> v1.10.0.0
[00059161][15 00][00] v1.1.2.0 -> v1.1.2.0
[00059243][17 00][00] v1.1.1.7 -> v1.1.1.7
[00059385][17 01][00] v1.0.2.7 -> v1.0.2.7
[00059464][19 00][00] v255.255.255.254 -> v1.0.8.96
[00059511][01 00][00] v1.30.5036 -> v1.29.4920 need upgrade
[00059562][01 01][05] v1.29.4920 -> v1.29.4920
[00059632][08 00][00] v0.13.0.7 -> v0.13.0.7
[00059698][09 00][00] v3.0.0.10 -> v2.13.0.0
[00059746]Done.

[00059800]Firmware upgrading[2]...
[00071826][01 00] Firmware upgrade start...
[00012129][01 00] Firmware upgrade finished successfully.
[00012187]Done.

[00012236]Packet [C:\P3X_FW_V01.07.0060.bin] resumed, card sn [0x2857532b].
[00012286]Packet vlink 01.07.0060 <-> 01.06.0040.
[00012344]Record vlink 01.08.0080 <-> 01.07.0060 (flow = 1).
[00012388]Version checking[2]...
[00012478][03 05][00] v34.2.0.9 -> v34.2.0.9
[00012557][03 06][00] v2.4.14.5 -> v2.4.13.0
[00012613][04 00][00] v1.44.0.0 -> v1.41.0.0
[00012738][11 00][00] v1.7.15.1 -> v1.7.15.1
[00012837][12 00][00] v1.10.0.0 -> v1.10.0.0
[00012937][12 01][00] v1.10.0.0 -> v1.10.0.0
[00013037][12 02][00] v1.10.0.0 -> v1.10.0.0
[00013125][12 03][00] v1.10.0.0 -> v1.10.0.0
[00013274][15 00][00] v1.1.2.0 -> v1.1.2.0
[00013386][17 00][00] v1.1.1.7 -> v1.1.1.7
[00013525][17 01][00] v1.0.2.7 -> v1.0.2.7
[00013601][19 00][00] v255.255.255.254 -> v1.0.8.96
[00013654][01 00][05] v1.29.4920 -> v1.29.4920
[00013702][01 01][05] v1.29.4920 -> v1.29.4920
[00013769][08 00][00] v0.13.0.7 -> v0.13.0.7
[00013840][09 00][00] v3.0.0.10 -> v2.13.0.0
[00013887]Packet upgrade finish successfully.



[00013484]========== remo-con disconnect. boot(15) ============
[00013531]Packet [C:\P3X_FW_V01.08.0080.bin] detected, card sn [0x2857532b].
[00013577]Packet upgrade start...

[00013633]Packet checking...
[00013682]Packet vlink 01.08.0080 <-> 01.07.0060.
[00013730]Record vlink 01.08.0080 <-> 01.07.0060 (flow = 0).
[00013782]Done.

[00013935]Version checking[1]...
[00014013][03 05][00] v34.2.0.9 -> v34.2.0.9
[00014113][03 06][00] v2.4.14.5 -> v2.4.14.5
[00014170][04 00][00] v1.44.0.0 -> v1.44.0.0
[00014293][11 00][00] v1.7.15.1 -> v1.7.15.1
[00014407][12 00][00] v1.10.0.0 -> v1.10.0.0
[00014507][12 01][00] v1.10.0.0 -> v1.10.0.0
[00014607][12 02][00] v1.10.0.0 -> v1.10.0.0
[00014707][12 03][00] v1.10.0.0 -> v1.10.0.0
[00014871][15 00][00] v1.1.2.0 -> v1.1.2.0
[00014962][17 00][00] v1.1.1.7 -> v1.1.1.7
[00015102][17 01][00] v1.0.2.7 -> v1.0.2.7
[00015178][19 00][00] v255.255.255.254 -> v1.0.8.96
[00015228][01 00][00] v1.29.4920 -> v1.30.5036 need upgrade
[00015284][01 01][00] v1.29.4920 -> v1.30.5036 need upgrade
[00015352][08 00][00] v0.13.0.7 -> v0.13.0.7
[00015422][09 00][00] v3.0.0.10 -> v3.0.0.10
[00015472]Done.

[00017523]Waiting for user confirm...
[00027572]Timeout, start upgrade automatically.

[00027676]Firmware upgrading[1]...
[00039713][01 00] Firmware upgrade start...
[00012139][01 00] Firmware upgrade finished successfully.
[00012190]Done.

[00012240]Packet [C:\P3X_FW_V01.08.0080.bin] resumed, card sn [0x2857532b].
[00012292]Packet vlink 01.08.0080 <-> 01.07.0060.
[00012350]Record vlink 01.08.0080 <-> 01.07.0060 (flow = 0).
[00012398]Version checking[2]...
[00012496][03 05][00] v34.2.0.9 -> v34.2.0.9
[00012595][03 06][00] v2.4.14.5 -> v2.4.14.5
[00012655][04 00][00] v1.44.0.0 -> v1.44.0.0
[00012776][11 00][00] v1.7.15.1 -> v1.7.15.1
[00012884][12 00][00] v1.10.0.0 -> v1.10.0.0
[00012983][12 01][00] v1.10.0.0 -> v1.10.0.0
[00013083][12 02][00] v1.10.0.0 -> v1.10.0.0
[00013215][12 03][00] v1.10.0.0 -> v1.10.0.0
[00013352][15 00][00] v1.1.2.0 -> v1.1.2.0
[00013445][17 00][00] v1.1.1.7 -> v1.1.1.7
[00013580][17 01][00] v1.0.2.7 -> v1.0.2.7
[00013655][19 00][00] v255.255.255.254 -> v1.0.8.96
[00013703][01 00][05] v1.30.5036 -> v1.30.5036
[00013753][01 01][00] v1.29.4920 -> v1.30.5036 need upgrade
[00013820][08 00][00] v0.13.0.7 -> v0.13.0.7
[00014016][09 00][00] v3.0.0.10 -> v3.0.0.10
[00014067]Done.

[00014121]Firmware upgrading[2]...
[00014287][01 01] Firmware upgrade start...
[00044613][01 01] Firmware upgrade finished successfully.
[00044673]Done.

[00044723]Version checking[3]...
[00044817][03 05][00] v34.2.0.9 -> v34.2.0.9
[00044921][03 06][00] v2.4.14.5 -> v2.4.14.5
[00044980][04 00][00] v1.44.0.0 -> v1.44.0.0
[00045118][11 00][00] v1.7.15.1 -> v1.7.15.1
[00045221][12 00][00] v1.10.0.0 -> v1.10.0.0
[00045321][12 01][00] v1.10.0.0 -> v1.10.0.0
[00045426][12 02][00] v1.10.0.0 -> v1.10.0.0
[00045577][12 03][00] v1.10.0.0 -> v1.10.0.0
[00045721][15 00][00] v1.1.2.0 -> v1.1.2.0
[00045821][17 00][00] v1.1.1.7 -> v1.1.1.7
[00045961][17 01][00] v1.0.2.7 -> v1.0.2.7
[00046036][19 00][00] v255.255.255.254 -> v1.0.8.96
[00046087][01 00][05] v1.30.5036 -> v1.30.5036
[00046144][01 01][05] v1.30.5036 -> v1.30.5036
[00046210][08 00][00] v0.13.0.7 -> v0.13.0.7
[00046277][09 00][00] v3.0.0.10 -> v3.0.0.10
[00046331]Packet upgrade finish successfully.



[00013458]========== 2016.05.15 15:14:20. boot(15) ============
[00013509]Packet [C:\P3X_FW_V01.08.0080.bin] detected, card sn [0x2857532b].
[00013561]Packet upgrade start...

[00013618]Packet checking...
[00013670]Packet vlink 01.08.0080 <-> 01.07.0060.
[00013720]Record vlink 01.08.0080 <-> 01.07.0060 (flow = 0).
[00013776]Done.

[00013827]Version checking[1]...
[00013914][03 05][00] v34.2.0.9 -> v34.2.0.9
[00014014][03 06][00] v2.4.14.5 -> v2.4.14.5
[00014078][04 00][00] v1.44.0.0 -> v1.44.0.0
[00014214][11 00][00] v1.7.15.1 -> v1.7.15.1
[00014343][12 00][00] v1.10.0.0 -> v1.10.0.0
[00014442][12 01][00] v1.10.0.0 -> v1.10.0.0
[00014542][12 02][00] v1.10.0.0 -> v1.10.0.0
[00014644][12 03][00] v1.10.0.0 -> v1.10.0.0
[00014787][15 00][00] v1.1.2.0 -> v1.1.2.0
[00014898][17 00][00] v1.1.1.7 -> v1.1.1.7
[00015037][17 01][00] v1.0.2.7 -> v1.0.2.7
[00015107][19 00][00] v255.255.255.254 -> v1.0.8.96
[00015157][01 00][00] v1.30.5036 -> v1.30.5036
[00015314][01 01][00] v1.30.5036 -> v1.30.5036
[00015383][08 00][00] v0.13.0.7 -> v0.13.0.7
[00015468][09 00][00] v3.0.0.10 -> v3.0.0.10
[00015519]Packet upgrade cancelled at version checking.



[00013101]========== remo-con disconnect. boot(15) ============
[00013161]Packet [C:\P3X_FW_V01.08.0080.bin] detected, card sn [0x2857532b].
[00013214]Packet upgrade start...

[00013270]Packet checking...
[00013331]Packet vlink 01.08.0080 <-> 01.07.0060.
[00013381]Record vlink 01.08.0080 <-> 01.07.0060 (flow = 0).
[00013437]Done.

[00013494]Version checking[1]...
[00013591][03 05][00] v34.2.0.9 -> v34.2.0.9
[00013691][03 06][00] v2.4.14.5 -> v2.4.14.5
[00013755][04 00][00] v1.44.0.0 -> v1.44.0.0
[00013890][11 00][00] v1.7.15.1 -> v1.7.15.1
[00014010][12 00][00] v1.10.0.0 -> v1.10.0.0
[00014120][12 01][00] v1.10.0.0 -> v1.10.0.0
[00014250][12 02][00] v1.10.0.0 -> v1.10.0.0
[00014359][12 03][00] v1.10.0.0 -> v1.10.0.0
[00014504][15 00][00] v1.1.2.0 -> v1.1.2.0
[00014620][17 00][00] v1.1.1.7 -> v1.1.1.7
[00014760][17 01][00] v1.0.2.7 -> v1.0.2.7
[00014826][19 00][00] v255.255.255.254 -> v1.0.8.96
[00014877][01 00][00] v1.30.5036 -> v1.30.5036
[00014931][01 01][00] v1.30.5036 -> v1.30.5036
[00015006][08 00][00] v0.13.0.7 -> v0.13.0.7
[00015086][09 00][00] v3.0.0.10 -> v3.0.0.10
[00015139]Packet upgrade cancelled at version checking.

DJI Ken, here's the video showing a connection for a P3 Standard, but not for a P3 Professional.

joakim Posted at 2016-5-16 22:58
I started with the copter direct on the sd card. The log files looks ok.
https://youtu.be/_uLT8rvX ...

Your first video shows RC Signal Lost, your 2nd video shows everything is matched.
which one is the current video ?
If you see aircraft warming up and not RC signal lost and the RC LED is green then you are on matched firmware.
it looks like the aircraft is on 1.8 and the RC is on 1.6 so I think your ok.
It may be a server thing as to why the RC

tiscali Posted at 2016-5-16 23:32
DJI Ken, here's the video showing a connection for a P3 Standard, but not for a P3 Professional.

No video attached

DJI-Ken Posted at 2016-5-16 17:33
Your first video shows RC Signal Lost, your 2nd video shows everything is matched.
which one is th ...

The second was during warm up and the error starts after worming up.

The iPad says in general setting that the RC is GL300B but my is a "C" model?

I have the same issue as seen in the firsttwo video of joakim and as described in my post thread: http://forum.dji.com/forum.php?m ... id=51940&page=1

joakim Posted at 2016-5-16 17:39
The second was during warm up and the error starts after worming up.

The iPad says in general set ...

DJI-Ken

Is there any possibility to update the RC with USB stick or with the cable connected to the Craft? That is what i am trying right now (again).

Sorry about the non appearance of video in my last post. Here it is showing I connect IF I had a P3 Standard, but not with my P3 Professional -

tiscali Posted at 2016-5-17 00:26
Sorry about the non appearance of video in my last post. Here it is showing I connect IF I had a P3  ...

DJI and Apple are working together to solve the connectivity issue.
There is a new IOS update 9.3.2, if your device doesn't say there's an update yet then connect to your computer and install 9.3.2 through iTunes and this should solve it and you should be able to connect now.
Please let me know how it works for you.

Wohooo! It works! I'm a believer in iOS 9.3.2!

DJI-Ken Posted at 2016-5-16 19:06
DJI and Apple are working together to solve the connectivity issue.
There is a new IOS update 9.3. ...

I was hoping this update was solving my problem with RC signal lost. But unfortunately not.

I have updated my phone and reset my iPad to factory defaults and reinstall from iCloud backup.

tiscali Posted at 2016-5-17 00:26
Sorry about the non appearance of video in my last post. Here it is showing I connect IF I had a P3  ...

I thought you said you can get into camera view of the Standard and it worked, (which you cannot).
Update to 9.3.2 and you should be able to connect.

tiscali Posted at 2016-5-17 01:32
Wohooo! It works! I'm a believer in iOS 9.3.2!

Awesome, glad it worked

joakim Posted at 2016-5-17 01:39
I was hoping this update was solving my problem with RC signal lost. But unfortunately not.

I hav ...

As I stated before, this How to connect or no camera view is not your issue. If you see RC signal lost then you are connected but the firmware is not matched.
Again, you had two videos, one that showed RC signal lost and the other that showed Aircraft Warming Up and you have camera view on both so you ARE able to connect and not having the same issue as the others..
Which video was was the latest one, the RC signal lost or aircraft warming up?
And did you update the aircraft with the BIN file by downloading the ZIP file from the DJI P3 pro download page?
I can help you, but I need these questions answered.

DJI-Ken Posted at 2016-5-16 20:04
As I stated before, this How to connect or no camera view is not your issue. If you see RC signal  ...

Thank you for helping me!

I know that I don't have the same problem as the other. My problem is that I got the "RC signal lost". Everything else is working. I can use the camera and I see what the copter sees.

I cannot se what versions I have i "About section". And it does not tell me that I need to upgrade anything.

When I start up beginning with the RC and after that the Copter. It starts showing "Warming up" fore a couple of minutes. After that it starts to show "RC signal lost".

My videos got in wrong order when I uploaded them and I am sorry if that caused confusion.

I can give you a video if necessary when my restore and upgrade of my iPad is done. I will also borrow an android from a friend och try if that will work tonight.

joakim Posted at 2016-5-17 02:29
Thank you for helping me!

I know that I don't have the same problem as the other. My problem is t ...

OK I see now, that is strange that you see aircraft warming up, then you see RC signal lost.
Did you try the 1.8 firmware update again.
Try it on a freshly formatted SD card then post the hidden log file after you have attempted to update.
Also, make sure the RC is OFF while updating the aircraft and if the aircraft does not make 4 beeps after a few minutes then it is probably already updated. If it does make the 4 beeps then it is updating and let it run for up to 25 minutes or until you hear the beeps go to 3 beeps.

iOS 9.3.2 released!!! Install and all is ok

tholighaus Posted at 2016-5-17 02:46
iOS 9.3.2 released!!! Install and all is ok

That's awesome, I told you DJI and Apple were working together to remedy it

DJI-Ken Posted at 2016-5-16 20:45
OK I see now, that is strange that you see aircraft warming up, then you see RC signal lost.
Did y ...

It didn't do anything and the logs tells that is the same version.


========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: P3X_FW_V01.08.0080.bin
Upgrading ...
Result: Success.

========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: P3X_FW_V01.07.0060.bin
Upgrading ...
Result: Success.

========== 2016.05.15 10:43:25 =====================
Packet: P3X_FW_V01.07.0060.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: P3X_FW_V01.08.0080.bin
Upgrading ...
Result: Success.

========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: P3X_FW_V01.08.0080.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: P3X_FW_V01.07.0060.bin
Upgrading ...
Result: Success.

========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: P3X_FW_V01.08.0080.bin
Upgrading ...
Result: Success.

========== 2016.05.15 15:14:18 =====================
Packet: P3X_FW_V01.08.0080.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: P3X_FW_V01.08.0080.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

========== 2016.05.15 16:54:19 =====================
Packet: P3X_FW_V01.08.0080.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

========== 2014.01.01 00:00:42 remo-con disconnect======
Packet: P3X_FW_V01.08.0080.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

========== 2016.05.15 19:01:38 =====================
Packet: P3X_FW_V01.08.0080.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

========== 2016.05.15 19:21:13 =====================
Packet: P3X_FW_V01.08.0080.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

========== 2016.05.15 19:24:16 =====================
Packet: P3X_FW_V01.08.0080.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

========== 2016.05.15 19:35:59 =====================
Packet: P3X_FW_V01.08.0080.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

========== 2016.05.15 20:10:05 =====================
Packet: P3X_FW_V01.08.0080.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

========== 2016.05.15 22:10:29 =====================
Packet: P3X_FW_V01.08.0080.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

========== 2016.05.15 22:47:50 =====================
Packet: P3X_FW_V01.08.0080.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

========== 2016.05.15 22:56:19 =====================
Packet: P3X_FW_V01.08.0080.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

========== 2016.05.15 23:17:13 =====================
Packet: P3X_FW_V01.08.0080.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

========== 2014.01.01 00:00:40 remo-con disconnect======
Packet: P3X_FW_V01.08.0080.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

========== 2016.05.16 07:31:35 =====================
Packet: P3X_FW_V01.08.0080.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

========== 2016.05.16 07:35:18 =====================
Packet: P3X_FW_V01.08.0080.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

========== 2016.05.16 16:38:49 =====================
Packet: P3X_FW_V01.08.0080.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

========== 2016.05.16 17:35:45 =====================
Packet: P3X_FW_V01.08.0080.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

========== 2016.05.16 17:48:36 =====================
Packet: P3X_FW_V01.08.0080.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

========== 2014.01.01 00:06:19 remo-con disconnect======
Packet: P3X_FW_V01.08.0080.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

========== 2014.01.01 00:00:14 remo-con disconnect======
Packet: P3X_FW_V01.08.0080.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

========== 2016.05.16 19:32:48 =====================
Packet: P3X_FW_V01.08.0080.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

========== 2014.01.01 00:00:14 remo-con disconnect======
Packet: P3X_FW_V01.08.0080.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.




[00016799]========== remo-con disconnect. boot(15) ============
[00016935]Firmware [C:\PDM368Fw3.bin] detected, card sn [0x50ce016d].
[00016972][08 00] Firmware upgrade start...
[00523950][08 00] Firmware upgrade finished successfully.
[00523995]Done.

[00013107]========== remo-con disconnect. boot(15) ============
[00013146]Packet [C:\P3X_FW_V01.08.0080.bin] detected, card sn [0x2857532b].
[00013183]Packet upgrade start...

[00013227]Packet checking...
[00013266]Packet vlink 01.08.0080 <-> 01.07.0060.
[00013336]Done.

[00013372]Version checking[1]...
[00013458][03 05][00] v34.2.0.9 -> v34.2.0.9
[00013538][03 06][00] v2.4.0.4 -> v2.4.14.5 need upgrade.
[00013586][04 00][00] v1.41.0.0 -> v1.44.0.0 need upgrade.
[00013698][11 00][00] v1.7.0.0 -> v1.7.15.1 need upgrade.
[00013818][12 00][00] v1.10.0.0 -> v1.10.0.0
[00013901][12 01][00] v1.10.0.0 -> v1.10.0.0
[00013991][12 02][00] v1.10.0.0 -> v1.10.0.0
[00014071][12 03][00] v1.10.0.0 -> v1.10.0.0
[00014204][15 00][00] v1.1.2.0 -> v1.1.2.0
[00014306][17 00][00] v1.1.1.7 -> v1.1.1.7
[00014447][17 01][00] v1.0.2.7 -> v1.0.2.7
[00014496][19 00][00] v255.255.255.254 -> v1.0.8.96
[00014535][01 00][00] v1.25.4236 -> v1.30.5036 need upgrade
[00014577][01 01][00] v1.25.4236 -> v1.30.5036 need upgrade
[00014629][08 00][00] v0.13.0.7 -> v0.13.0.7
[00014677][09 00][00] v2.13.0.0 -> v3.0.0.10 need upgrade.
[00014713]Done.

[00016754]Waiting for user confirm...
[00026789]Timeout, start upgrade automatically.

[00026863]Firmware upgrading[1]...
[00038360][01 00] Firmware upgrade start...
[00012248][01 00] Firmware upgrade finished successfully.
[00012299]Done.

[00012335]Packet [C:\P3X_FW_V01.08.0080.bin] resumed, card sn [0x2857532b].
[00012376]Packet vlink 01.08.0080 <-> 01.07.0060.
[00012450]Version checking[2]...
[00012533][03 05][00] v34.2.0.9 -> v34.2.0.9
[00012612][03 06][00] v2.4.0.4 -> v2.4.14.5 need upgrade.
[00012662][04 00][00] v1.41.0.0 -> v1.44.0.0 need upgrade.
[00012774][11 00][00] v1.7.0.0 -> v1.7.15.1 need upgrade.
[00012986][12 00][00] v1.10.0.0 -> v1.10.0.0
[00013086][12 01][00] v1.10.0.0 -> v1.10.0.0
[00013162][12 02][00] v1.10.0.0 -> v1.10.0.0
[00013254][12 03][00] v1.10.0.0 -> v1.10.0.0
[00013391][15 00][00] v1.1.2.0 -> v1.1.2.0
[00013501][17 00][00] v1.1.1.7 -> v1.1.1.7
[00013615][17 01][00] v1.0.2.7 -> v1.0.2.7
[00013672][19 00][00] v255.255.255.254 -> v1.0.8.96
[00013711][01 00][05] v1.30.5036 -> v1.30.5036
[00013755][01 01][00] v1.25.4236 -> v1.30.5036 need upgrade
[00013810][08 00][00] v0.13.0.7 -> v0.13.0.7
[00013872][09 00][00] v2.13.0.0 -> v3.0.0.10 need upgrade.
[00013916]Done.

[00013954]Firmware upgrading[2]...
[00014094][01 01] Firmware upgrade start...
[00044396][01 01] Firmware upgrade finished successfully.
[00044452][11 00] Firmware upgrade start...
[00092113][11 00] Firmware upgrade finished successfully.
[00092357][03 06] Firmware upgrade start...
[00394036][03 06] Firmware upgrade finished successfully.
[00394097][09 00] Firmware upgrade start...
[00446159][09 00] Firmware upgrade finished successfully.
[00446233][04 00] Firmware upgrade start...
[00504981][04 00] Firmware upgrade finished successfully.
[00505023]Done.

[00505070]Version checking[3]...
[00505139][03 05][00] v34.2.0.9 -> v34.2.0.9
[00505201][03 06][05] v2.4.14.5 -> v2.4.14.5
[00505280][04 00][05] v1.44.0.0 -> v1.44.0.0
[00505380][11 00][05] v1.7.15.1 -> v1.7.15.1
[00505473][12 00][00] v1.10.0.0 -> v1.10.0.0
[00505548][12 01][00] v1.10.0.0 -> v1.10.0.0
[00505634][12 02][00] v1.10.0.0 -> v1.10.0.0
[00505709][12 03][00] v1.10.0.0 -> v1.10.0.0
[00505859][15 00][00] v1.1.2.0 -> v1.1.2.0
[00505943][17 00][00] v1.1.1.7 -> v1.1.1.7
[00506062][17 01][00] v1.0.2.7 -> v1.0.2.7
[00506127][19 00][00] v255.255.255.254 -> v1.0.8.96
[00506167][01 00][05] v1.30.5036 -> v1.30.5036
[00506204][01 01][05] v1.30.5036 -> v1.30.5036
[00506289][08 00][00] v0.13.0.7 -> v0.13.0.7
[00506347][09 00][05] v3.0.0.10 -> v3.0.0.10
[00506384]Packet upgrade finish successfully.



[00013658]========== remo-con disconnect. boot(15) ============
[00013697]Packet [C:\P3X_FW_V01.07.0060.bin] detected, card sn [0x2857532b].
[00013735]Packet upgrade start...

[00013784]Packet checking...
[00013826]Packet vlink 01.07.0060 <-> 01.06.0040.
[00013866]Record vlink 01.08.0080 <-> 01.07.0060 (flow = 1).
[00013905]Done.

[00013951]Version checking[1]...
[00014034][03 05][00] v34.2.0.9 -> v34.2.0.9
[00014119][03 06][00] v2.4.14.5 -> v2.4.13.0
[00014168][04 00][00] v1.44.0.0 -> v1.41.0.0
[00014280][11 00][00] v1.7.15.1 -> v1.7.15.1
[00014399][12 00][00] v1.10.0.0 -> v1.10.0.0
[00014507][12 01][00] v1.10.0.0 -> v1.10.0.0
[00014600][12 02][00] v1.10.0.0 -> v1.10.0.0
[00014685][12 03][00] v1.10.0.0 -> v1.10.0.0
[00014834][15 00][00] v1.1.2.0 -> v1.1.2.0
[00014924][17 00][00] v1.1.1.7 -> v1.1.1.7
[00015052][17 01][00] v1.0.2.7 -> v1.0.2.7
[00015119][19 00][00] v255.255.255.254 -> v1.0.8.96
[00015159][01 00][00] v1.30.5036 -> v1.29.4920 need upgrade
[00015201][01 01][00] v1.30.5036 -> v1.29.4920 need upgrade
[00015271][08 00][00] v0.13.0.7 -> v0.13.0.7
[00015338][09 00][00] v3.0.0.10 -> v2.13.0.0
[00015379]Done.

[00017427]Waiting for user confirm...
[00027469]Timeout, start upgrade automatically.

[00027547]Firmware upgrading[1]...
[00027684][01 01] Firmware upgrade start...
[00057976][01 01] Firmware upgrade finished successfully.
[00058018]Done.

[00058061]Version checking[2]...
[00058136][03 05][00] v34.2.0.9 -> v34.2.0.9
[00058223][03 06][00] v2.4.14.5 -> v2.4.13.0
[00058276][04 00][00] v1.44.0.0 -> v1.41.0.0 need upgrade.
[00058402][11 00][00] v1.7.15.1 -> v1.7.15.1
[00058506][12 00][00] v1.10.0.0 -> v1.10.0.0
[00058603][12 01][00] v1.10.0.0 -> v1.10.0.0
[00058711][12 02][00] v1.10.0.0 -> v1.10.0.0
[00058810][12 03][00] v1.10.0.0 -> v1.10.0.0
[00058967][15 00][00] v1.1.2.0 -> v1.1.2.0
[00059045][17 00][00] v1.1.1.7 -> v1.1.1.7
[00059165][17 01][00] v1.0.2.7 -> v1.0.2.7
[00059221][19 00][00] v255.255.255.254 -> v1.0.8.96
[00059369][01 00][00] v1.30.5036 -> v1.29.4920 need upgrade
[00059410][01 01][05] v1.29.4920 -> v1.29.4920
[00059468][08 00][00] v0.13.0.7 -> v0.13.0.7
[00059522][09 00][00] v3.0.0.10 -> v2.13.0.0
[00059563]Done.

[00059603]Firmware upgrading[2]...
[00059675][04 00] Firmware upgrade start...
[00118259][04 00] Firmware upgrade finished successfully.
[00118302]Done.

[00118341]Version checking[3]...
[00118425][03 05][00] v34.2.0.9 -> v34.2.0.9
[00118505][03 06][00] v2.4.14.5 -> v2.4.13.0
[00118565][04 00][05] v1.41.0.0 -> v1.41.0.0
[00118685][11 00][00] v1.7.15.1 -> v1.7.15.1
[00118789][12 00][00] v1.10.0.0 -> v1.10.0.0
[00118893][12 01][00] v1.10.0.0 -> v1.10.0.0
[00118973][12 02][00] v1.10.0.0 -> v1.10.0.0
[00119049][12 03][00] v1.10.0.0 -> v1.10.0.0
[00119196][15 00][00] v1.1.2.0 -> v1.1.2.0
[00119310][17 00][00] v1.1.1.7 -> v1.1.1.7
[00119430][17 01][00] v1.0.2.7 -> v1.0.2.7
[00119485][19 00][00] v255.255.255.254 -> v1.0.8.96
[00119534][01 00][00] v1.30.5036 -> v1.29.4920 need upgrade
[00119573][01 01][05] v1.29.4920 -> v1.29.4920
[00119626][08 00][00] v0.13.0.7 -> v0.13.0.7
[00119685][09 00][00] v3.0.0.10 -> v2.13.0.0
[00119730]Done.

[00119770]Firmware upgrading[3]...
[00131127][01 00] Firmware upgrade start...
[00012135][01 00] Firmware upgrade finished successfully.
[00012179]Done.

[00012220]Packet [C:\P3X_FW_V01.07.0060.bin] resumed, card sn [0x2857532b].
[00012267]Packet vlink 01.07.0060 <-> 01.06.0040.
[00012319]Record vlink 01.08.0080 <-> 01.07.0060 (flow = 1).
[00012360]Version checking[2]...
[00012435][03 05][00] v34.2.0.9 -> v34.2.0.9
[00012515][03 06][00] v2.4.14.5 -> v2.4.13.0
[00012569][04 00][05] v1.41.0.0 -> v1.41.0.0
[00012697][11 00][00] v1.7.15.1 -> v1.7.15.1
[00012784][12 00][00] v1.10.0.0 -> v1.10.0.0
[00012883][12 01][00] v1.10.0.0 -> v1.10.0.0
[00012983][12 02][00] v1.10.0.0 -> v1.10.0.0
[00013064][12 03][00] v1.10.0.0 -> v1.10.0.0
[00013212][15 00][00] v1.1.2.0 -> v1.1.2.0
[00013424][17 00][00] v1.1.1.7 -> v1.1.1.7
[00013559][17 01][00] v1.0.2.7 -> v1.0.2.7
[00013614][19 00][00] v255.255.255.254 -> v1.0.8.96
[00013660][01 00][05] v1.29.4920 -> v1.29.4920
[00013701][01 01][05] v1.29.4920 -> v1.29.4920
[00013766][08 00][00] v0.13.0.7 -> v0.13.0.7
[00013834][09 00][00] v3.0.0.10 -> v2.13.0.0
[00013875]Packet upgrade finish successfully.



[00013499]========== 2016.05.15 10:43:27. boot(15) ============
[00013543]Packet [C:\P3X_FW_V01.07.0060.bin] detected, card sn [0x2857532b].
[00013588]Packet upgrade start...

[00013634]Packet checking...
[00013681]Packet vlink 01.07.0060 <-> 01.06.0040.
[00013727]Record vlink 01.08.0080 <-> 01.07.0060 (flow = 1).
[00013780]Done.

[00013823]Version checking[1]...
[00013913][03 05][00] v34.2.0.9 -> v34.2.0.9
[00014011][03 06][00] v2.4.14.5 -> v2.4.13.0
[00014060][04 00][00] v1.41.0.0 -> v1.41.0.0
[00014177][11 00][00] v1.7.15.1 -> v1.7.15.1
[00014265][12 00][00] v1.10.0.0 -> v1.10.0.0
[00014365][12 01][00] v1.10.0.0 -> v1.10.0.0
[00014465][12 02][00] v1.10.0.0 -> v1.10.0.0
[00014565][12 03][00] v1.10.0.0 -> v1.10.0.0
[00014719][15 00][00] v1.1.2.0 -> v1.1.2.0
[00014821][17 00][00] v1.1.1.7 -> v1.1.1.7
[00014961][17 01][00] v1.0.2.7 -> v1.0.2.7
[00015032][19 00][00] v255.255.255.254 -> v1.0.8.96
[00015074][01 00][00] v1.29.4920 -> v1.29.4920
[00015116][01 01][00] v1.29.4920 -> v1.29.4920
[00015194][08 00][00] v0.13.0.7 -> v0.13.0.7
[00015251][09 00][00] v3.0.0.10 -> v2.13.0.0
[00015297]Packet upgrade cancelled at version checking.



[00013968]========== remo-con disconnect. boot(15) ============
[00014010]Packet [C:\P3X_FW_V01.08.0080.bin] detected, card sn [0x2857532b].
[00014056]Packet upgrade start...

[00014105]Packet checking...
[00014150]Packet vlink 01.08.0080 <-> 01.07.0060.
[00014191]Record vlink 01.08.0080 <-> 01.07.0060 (flow = 0).
[00014231]Done.

[00014283]Version checking[1]...
[00014375][03 05][00] v34.2.0.9 -> v34.2.0.9
[00014575][03 06][00] v2.4.14.5 -> v2.4.14.5
[00014639][04 00][00] v1.41.0.0 -> v1.44.0.0 need upgrade.
[00014756][11 00][00] v1.7.15.1 -> v1.7.15.1
[00014845][12 00][00] v1.10.0.0 -> v1.10.0.0
[00014936][12 01][00] v1.10.0.0 -> v1.10.0.0
[00015045][12 02][00] v1.10.0.0 -> v1.10.0.0
[00015151][12 03][00] v1.10.0.0 -> v1.10.0.0
[00015304][15 00][00] v1.1.2.0 -> v1.1.2.0
[00015404][17 00][00] v1.1.1.7 -> v1.1.1.7
[00015550][17 01][00] v1.0.2.7 -> v1.0.2.7
[00015610][19 00][00] v255.255.255.254 -> v1.0.8.96
[00015660][01 00][00] v1.29.4920 -> v1.30.5036 need upgrade
[00015701][01 01][00] v1.29.4920 -> v1.30.5036 need upgrade
[00015761][08 00][00] v0.13.0.7 -> v0.13.0.7
[00015829][09 00][00] v3.0.0.10 -> v3.0.0.10
[00015874]Done.

[00017923]Waiting for user confirm...
[00027967]Timeout, start upgrade automatically.

[00028055]Firmware upgrading[1]...
[00039392][01 00] Firmware upgrade start...
[00012131][01 00] Firmware upgrade finished successfully.
[00012189]Done.

[00012249]Packet [C:\P3X_FW_V01.08.0080.bin] resumed, card sn [0x2857532b].
[00012296]Packet vlink 01.08.0080 <-> 01.07.0060.
[00012347]Record vlink 01.08.0080 <-> 01.07.0060 (flow = 0).
[00012388]Version checking[2]...
[00012476][03 05][00] v34.2.0.9 -> v34.2.0.9
[00012556][03 06][00] v2.4.14.5 -> v2.4.14.5
[00012605][04 00][00] v1.41.0.0 -> v1.44.0.0 need upgrade.
[00012716][11 00][00] v1.7.15.1 -> v1.7.15.1
[00012836][12 00][00] v1.10.0.0 -> v1.10.0.0
[00012911][12 01][00] v1.10.0.0 -> v1.10.0.0
[00013016][12 02][00] v1.10.0.0 -> v1.10.0.0
[00013090][12 03][00] v1.10.0.0 -> v1.10.0.0
[00013246][15 00][00] v1.1.2.0 -> v1.1.2.0
[00013326][17 00][00] v1.1.1.7 -> v1.1.1.7
[00013446][17 01][00] v1.0.2.7 -> v1.0.2.7
[00013511][19 00][00] v255.255.255.254 -> v1.0.8.96
[00013555][01 00][05] v1.30.5036 -> v1.30.5036
[00013599][01 01][00] v1.29.4920 -> v1.30.5036 need upgrade
[00013655][08 00][00] v0.13.0.7 -> v0.13.0.7
[00013711][09 00][00] v3.0.0.10 -> v3.0.0.10
[00013756]Done.

[00013923]Firmware upgrading[2]...
[00014082][01 01] Firmware upgrade start...
[00044401][01 01] Firmware upgrade finished successfully.
[00044477][04 00] Firmware upgrade start...
[00103306][04 00] Firmware upgrade finished successfully.
[00103354]Done.

[00103399]Version checking[3]...
[00103482][03 05][00] v34.2.0.9 -> v34.2.0.9
[00103563][03 06][00] v2.4.14.5 -> v2.4.14.5
[00103618][04 00][05] v1.44.0.0 -> v1.44.0.0
[00103743][11 00][00] v1.7.15.1 -> v1.7.15.1
[00103837][12 00][00] v1.10.0.0 -> v1.10.0.0
[00103937][12 01][00] v1.10.0.0 -> v1.10.0.0
[00104038][12 02][00] v1.10.0.0 -> v1.10.0.0
[00104112][12 03][00] v1.10.0.0 -> v1.10.0.0
[00104288][15 00][00] v1.1.2.0 -> v1.1.2.0
[00104394][17 00][00] v1.1.1.7 -> v1.1.1.7
[00104512][17 01][00] v1.0.2.7 -> v1.0.2.7
[00104577][19 00][00] v255.255.255.254 -> v1.0.8.96
[00104640][01 00][05] v1.30.5036 -> v1.30.5036
[00104685][01 01][05] v1.30.5036 -> v1.30.5036
[00104745][08 00][00] v0.13.0.7 -> v0.13.0.7
[00104816][09 00][00] v3.0.0.10 -> v3.0.0.10
[00104864]Packet upgrade finish successfully.



[00013552]========== remo-con disconnect. boot(15) ============
[00013602]Packet [C:\P3X_FW_V01.08.0080.bin] detected, card sn [0x2857532b].
[00013649]Packet upgrade start...

[00013697]Packet checking...
[00013744]Packet vlink 01.08.0080 <-> 01.07.0060.
[00013793]Record vlink 01.08.0080 <-> 01.07.0060 (flow = 0).
[00013837]Done.

[00013883]Version checking[1]...
[00013972][03 05][00] v34.2.0.9 -> v34.2.0.9
[00014071][03 06][00] v2.4.14.5 -> v2.4.14.5
[00014130][04 00][00] v1.44.0.0 -> v1.44.0.0
[00014255][11 00][00] v1.7.15.1 -> v1.7.15.1
[00014352][12 00][00] v1.10.0.0 -> v1.10.0.0
[00014435][12 01][00] v1.10.0.0 -> v1.10.0.0
[00014533][12 02][00] v1.10.0.0 -> v1.10.0.0
[00014632][12 03][00] v1.10.0.0 -> v1.10.0.0
[00014767][15 00][00] v1.1.2.0 -> v1.1.2.0
[00014844][17 00][00] v1.1.1.7 -> v1.1.1.7
[00014962][17 01][00] v1.0.2.7 -> v1.0.2.7
[00015020][19 00][00] v255.255.255.254 -> v1.0.8.96
[00015173][01 00][00] v1.30.5036 -> v1.30.5036
[00015224][01 01][00] v1.30.5036 -> v1.30.5036
[00015289][08 00][00] v0.13.0.7 -> v0.13.0.7
[00015361][09 00][00] v3.0.0.10 -> v3.0.0.10
[00015404]Packet upgrade cancelled at version checking.



[00013613]========== remo-con disconnect. boot(15) ============
[00013660]Packet [C:\P3X_FW_V01.07.0060.bin] detected, card sn [0x2857532b].
[00013706]Packet upgrade start...

[00013761]Packet checking...
[00013808]Packet vlink 01.07.0060 <-> 01.06.0040.
[00013860]Record vlink 01.08.0080 <-> 01.07.0060 (flow = 1).
[00013906]Done.

[00013959]Version checking[1]...
[00014034][03 05][00] v34.2.0.9 -> v34.2.0.9
[00014114][03 06][00] v2.4.14.5 -> v2.4.13.0
[00014166][04 00][00] v1.44.0.0 -> v1.41.0.0
[00014292][11 00][00] v1.7.15.1 -> v1.7.15.1
[00014381][12 00][00] v1.10.0.0 -> v1.10.0.0
[00014481][12 01][00] v1.10.0.0 -> v1.10.0.0
[00014585][12 02][00] v1.10.0.0 -> v1.10.0.0
[00014681][12 03][00] v1.10.0.0 -> v1.10.0.0
[00014829][15 00][00] v1.1.2.0 -> v1.1.2.0
[00014919][17 00][00] v1.1.1.7 -> v1.1.1.7
[00015037][17 01][00] v1.0.2.7 -> v1.0.2.7
[00015116][19 00][00] v255.255.255.254 -> v1.0.8.96
[00015162][01 00][00] v1.30.5036 -> v1.29.4920 need upgrade
[00015208][01 01][00] v1.30.5036 -> v1.29.4920 need upgrade
[00015296][08 00][00] v0.13.0.7 -> v0.13.0.7
[00015356][09 00][00] v3.0.0.10 -> v2.13.0.0
[00015401]Done.

[00017456]Waiting for user confirm...
[00027502]Timeout, start upgrade automatically.

[00027606]Firmware upgrading[1]...
[00027748][01 01] Firmware upgrade start...
[00058051][01 01] Firmware upgrade finished successfully.
[00058099]Done.

[00058149]Version checking[2]...
[00058235][03 05][00] v34.2.0.9 -> v34.2.0.9
[00058315][03 06][00] v2.4.14.5 -> v2.4.13.0
[00058370][04 00][00] v1.44.0.0 -> v1.41.0.0
[00058495][11 00][00] v1.7.15.1 -> v1.7.15.1
[00058584][12 00][00] v1.10.0.0 -> v1.10.0.0
[00058684][12 01][00] v1.10.0.0 -> v1.10.0.0
[00058784][12 02][00] v1.10.0.0 -> v1.10.0.0
[00059005][12 03][00] v1.10.0.0 -> v1.10.0.0
[00059161][15 00][00] v1.1.2.0 -> v1.1.2.0
[00059243][17 00][00] v1.1.1.7 -> v1.1.1.7
[00059385][17 01][00] v1.0.2.7 -> v1.0.2.7
[00059464][19 00][00] v255.255.255.254 -> v1.0.8.96
[00059511][01 00][00] v1.30.5036 -> v1.29.4920 need upgrade
[00059562][01 01][05] v1.29.4920 -> v1.29.4920
[00059632][08 00][00] v0.13.0.7 -> v0.13.0.7
[00059698][09 00][00] v3.0.0.10 -> v2.13.0.0
[00059746]Done.

[00059800]Firmware upgrading[2]...
[00071826][01 00] Firmware upgrade start...
[00012129][01 00] Firmware upgrade finished successfully.
[00012187]Done.

[00012236]Packet [C:\P3X_FW_V01.07.0060.bin] resumed, card sn [0x2857532b].
[00012286]Packet vlink 01.07.0060 <-> 01.06.0040.
[00012344]Record vlink 01.08.0080 <-> 01.07.0060 (flow = 1).
[00012388]Version checking[2]...
[00012478][03 05][00] v34.2.0.9 -> v34.2.0.9
[00012557][03 06][00] v2.4.14.5 -> v2.4.13.0
[00012613][04 00][00] v1.44.0.0 -> v1.41.0.0
[00012738][11 00][00] v1.7.15.1 -> v1.7.15.1
[00012837][12 00][00] v1.10.0.0 -> v1.10.0.0
[00012937][12 01][00] v1.10.0.0 -> v1.10.0.0
[00013037][12 02][00] v1.10.0.0 -> v1.10.0.0
[00013125][12 03][00] v1.10.0.0 -> v1.10.0.0
[00013274][15 00][00] v1.1.2.0 -> v1.1.2.0
[00013386][17 00][00] v1.1.1.7 -> v1.1.1.7
[00013525][17 01][00] v1.0.2.7 -> v1.0.2.7
[00013601][19 00][00] v255.255.255.254 -> v1.0.8.96
[00013654][01 00][05] v1.29.4920 -> v1.29.4920
[00013702][01 01][05] v1.29.4920 -> v1.29.4920
[00013769][08 00][00] v0.13.0.7 -> v0.13.0.7
[00013840][09 00][00] v3.0.0.10 -> v2.13.0.0
[00013887]Packet upgrade finish successfully.



[00013484]========== remo-con disconnect. boot(15) ============
[00013531]Packet [C:\P3X_FW_V01.08.0080.bin] detected, card sn [0x2857532b].
[00013577]Packet upgrade start...

[00013633]Packet checking...
[00013682]Packet vlink 01.08.0080 <-> 01.07.0060.
[00013730]Record vlink 01.08.0080 <-> 01.07.0060 (flow = 0).
[00013782]Done.

[00013935]Version checking[1]...
[00014013][03 05][00] v34.2.0.9 -> v34.2.0.9
[00014113][03 06][00] v2.4.14.5 -> v2.4.14.5
[00014170][04 00][00] v1.44.0.0 -> v1.44.0.0
[00014293][11 00][00] v1.7.15.1 -> v1.7.15.1
[00014407][12 00][00] v1.10.0.0 -> v1.10.0.0
[00014507][12 01][00] v1.10.0.0 -> v1.10.0.0
[00014607][12 02][00] v1.10.0.0 -> v1.10.0.0
[00014707][12 03][00] v1.10.0.0 -> v1.10.0.0
[00014871][15 00][00] v1.1.2.0 -> v1.1.2.0
[00014962][17 00][00] v1.1.1.7 -> v1.1.1.7
[00015102][17 01][00] v1.0.2.7 -> v1.0.2.7
[00015178][19 00][00] v255.255.255.254 -> v1.0.8.96
[00015228][01 00][00] v1.29.4920 -> v1.30.5036 need upgrade
[00015284][01 01][00] v1.29.4920 -> v1.30.5036 need upgrade
[00015352][08 00][00] v0.13.0.7 -> v0.13.0.7
[00015422][09 00][00] v3.0.0.10 -> v3.0.0.10
[00015472]Done.

[00017523]Waiting for user confirm...
[00027572]Timeout, start upgrade automatically.

[00027676]Firmware upgrading[1]...
[00039713][01 00] Firmware upgrade start...
[00012139][01 00] Firmware upgrade finished successfully.
[00012190]Done.

[00012240]Packet [C:\P3X_FW_V01.08.0080.bin] resumed, card sn [0x2857532b].
[00012292]Packet vlink 01.08.0080 <-> 01.07.0060.
[00012350]Record vlink 01.08.0080 <-> 01.07.0060 (flow = 0).
[00012398]Version checking[2]...
[00012496][03 05][00] v34.2.0.9 -> v34.2.0.9
[00012595][03 06][00] v2.4.14.5 -> v2.4.14.5
[00012655][04 00][00] v1.44.0.0 -> v1.44.0.0
[00012776][11 00][00] v1.7.15.1 -> v1.7.15.1
[00012884][12 00][00] v1.10.0.0 -> v1.10.0.0
[00012983][12 01][00] v1.10.0.0 -> v1.10.0.0
[00013083][12 02][00] v1.10.0.0 -> v1.10.0.0
[00013215][12 03][00] v1.10.0.0 -> v1.10.0.0
[00013352][15 00][00] v1.1.2.0 -> v1.1.2.0
[00013445][17 00][00] v1.1.1.7 -> v1.1.1.7
[00013580][17 01][00] v1.0.2.7 -> v1.0.2.7
[00013655][19 00][00] v255.255.255.254 -> v1.0.8.96
[00013703][01 00][05] v1.30.5036 -> v1.30.5036
[00013753][01 01][00] v1.29.4920 -> v1.30.5036 need upgrade
[00013820][08 00][00] v0.13.0.7 -> v0.13.0.7
[00014016][09 00][00] v3.0.0.10 -> v3.0.0.10
[00014067]Done.

[00014121]Firmware upgrading[2]...
[00014287][01 01] Firmware upgrade start...
[00044613][01 01] Firmware upgrade finished successfully.
[00044673]Done.

[00044723]Version checking[3]...
[00044817][03 05][00] v34.2.0.9 -> v34.2.0.9
[00044921][03 06][00] v2.4.14.5 -> v2.4.14.5
[00044980][04 00][00] v1.44.0.0 -> v1.44.0.0
[00045118][11 00][00] v1.7.15.1 -> v1.7.15.1
[00045221][12 00][00] v1.10.0.0 -> v1.10.0.0
[00045321][12 01][00] v1.10.0.0 -> v1.10.0.0
[00045426][12 02][00] v1.10.0.0 -> v1.10.0.0
[00045577][12 03][00] v1.10.0.0 -> v1.10.0.0
[00045721][15 00][00] v1.1.2.0 -> v1.1.2.0
[00045821][17 00][00] v1.1.1.7 -> v1.1.1.7
[00045961][17 01][00] v1.0.2.7 -> v1.0.2.7
[00046036][19 00][00] v255.255.255.254 -> v1.0.8.96
[00046087][01 00][05] v1.30.5036 -> v1.30.5036
[00046144][01 01][05] v1.30.5036 -> v1.30.5036
[00046210][08 00][00] v0.13.0.7 -> v0.13.0.7
[00046277][09 00][00] v3.0.0.10 -> v3.0.0.10
[00046331]Packet upgrade finish successfully.



[00013458]========== 2016.05.15 15:14:20. boot(15) ============
[00013509]Packet [C:\P3X_FW_V01.08.0080.bin] detected, card sn [0x2857532b].
[00013561]Packet upgrade start...

[00013618]Packet checking...
[00013670]Packet vlink 01.08.0080 <-> 01.07.0060.
[00013720]Record vlink 01.08.0080 <-> 01.07.0060 (flow = 0).
[00013776]Done.

[00013827]Version checking[1]...
[00013914][03 05][00] v34.2.0.9 -> v34.2.0.9
[00014014][03 06][00] v2.4.14.5 -> v2.4.14.5
[00014078][04 00][00] v1.44.0.0 -> v1.44.0.0
[00014214][11 00][00] v1.7.15.1 -> v1.7.15.1
[00014343][12 00][00] v1.10.0.0 -> v1.10.0.0
[00014442][12 01][00] v1.10.0.0 -> v1.10.0.0
[00014542][12 02][00] v1.10.0.0 -> v1.10.0.0
[00014644][12 03][00] v1.10.0.0 -> v1.10.0.0
[00014787][15 00][00] v1.1.2.0 -> v1.1.2.0
[00014898][17 00][00] v1.1.1.7 -> v1.1.1.7
[00015037][17 01][00] v1.0.2.7 -> v1.0.2.7
[00015107][19 00][00] v255.255.255.254 -> v1.0.8.96
[00015157][01 00][00] v1.30.5036 -> v1.30.5036
[00015314][01 01][00] v1.30.5036 -> v1.30.5036
[00015383][08 00][00] v0.13.0.7 -> v0.13.0.7
[00015468][09 00][00] v3.0.0.10 -> v3.0.0.10
[00015519]Packet upgrade cancelled at version checking.



[00013101]========== remo-con disconnect. boot(15) ============
[00013161]Packet [C:\P3X_FW_V01.08.0080.bin] detected, card sn [0x2857532b].
[00013214]Packet upgrade start...

[00013270]Packet checking...
[00013331]Packet vlink 01.08.0080 <-> 01.07.0060.
[00013381]Record vlink 01.08.0080 <-> 01.07.0060 (flow = 0).
[00013437]Done.

[00013494]Version checking[1]...
[00013591][03 05][00] v34.2.0.9 -> v34.2.0.9
[00013691][03 06][00] v2.4.14.5 -> v2.4.14.5
[00013755][04 00][00] v1.44.0.0 -> v1.44.0.0
[00013890][11 00][00] v1.7.15.1 -> v1.7.15.1
[00014010][12 00][00] v1.10.0.0 -> v1.10.0.0
[00014120][12 01][00] v1.10.0.0 -> v1.10.0.0
[00014250][12 02][00] v1.10.0.0 -> v1.10.0.0
[00014359][12 03][00] v1.10.0.0 -> v1.10.0.0
[00014504][15 00][00] v1.1.2.0 -> v1.1.2.0
[00014620][17 00][00] v1.1.1.7 -> v1.1.1.7
[00014760][17 01][00] v1.0.2.7 -> v1.0.2.7
[00014826][19 00][00] v255.255.255.254 -> v1.0.8.96
[00014877][01 00][00] v1.30.5036 -> v1.30.5036
[00014931][01 01][00] v1.30.5036 -> v1.30.5036
[00015006][08 00][00] v0.13.0.7 -> v0.13.0.7
[00015086][09 00][00] v3.0.0.10 -> v3.0.0.10
[00015139]Packet upgrade cancelled at version checking.



[00013052]========== 2016.05.15 16:54:20. boot(15) ============
[00013100]Packet [C:\P3X_FW_V01.08.0080.bin] detected, card sn [0x2857532b].
[00013154]Packet upgrade start...

[00013206]Packet checking...
[00013258]Packet vlink 01.08.0080 <-> 01.07.0060.
[00013307]Record vlink 01.08.0080 <-> 01.07.0060 (flow = 0).
[00013357]Done.

[00013404]Version checking[1]...
[00013498][03 05][00] v34.2.0.9 -> v34.2.0.9
[00013598][03 06][00] v2.4.14.5 -> v2.4.14.5
[00013652][04 00][00] v1.44.0.0 -> v1.44.0.0
[00013784][11 00][00] v1.7.15.1 -> v1.7.15.1
[00013887][12 00][00] v1.10.0.0 -> v1.10.0.0
[00014102][12 01][00] v1.10.0.0 -> v1.10.0.0
[00014228][12 02][00] v1.10.0.0 -> v1.10.0.0
[00014329][12 03][00] v1.10.0.0 -> v1.10.0.0
[00014468][15 00][00] v1.1.2.0 -> v1.1.2.0
[00014562][17 00][00] v1.1.1.7 -> v1.1.1.7
[00014713][17 01][00] v1.0.2.7 -> v1.0.2.7
[00014793][19 00][00] v255.255.255.254 -> v1.0.8.96
[00014843][01 00][00] v1.30.5036 -> v1.30.5036
[00014892][01 01][00] v1.30.5036 -> v1.30.5036
[00014965][08 00][00] v0.13.0.7 -> v0.13.0.7
[00015032][09 00][00] v3.0.0.10 -> v3.0.0.10
[00015085]Packet upgrade cancelled at version checking.



[00042517]========== remo-con disconnect. boot(15) ============
[00042572]Packet [C:\P3X_FW_V01.08.0080.bin] detected, card sn [0x2857532b].
[00042622]Packet upgrade start...

[00042684]Packet checking...
[00042742]Packet vlink 01.08.0080 <-> 01.07.0060.
[00042794]Record vlink 01.08.0080 <-> 01.07.0060 (flow = 0).
[00042850]Done.

[00042904]Version checking[1]...
[00042982][03 05][00] v34.2.0.9 -> v34.2.0.9
[00043082][03 06][00] v2.4.14.5 -> v2.4.14.5
[00043154][04 00][00] v1.44.0.0 -> v1.44.0.0
[00043282][11 00][00] v1.7.15.1 -> v1.7.15.1
[00043393][12 00][00] v1.10.0.0 -> v1.10.0.0
[00043491][12 01][00] v1.10.0.0 -> v1.10.0.0
[00043591][12 02][00] v1.10.0.0 -> v1.10.0.0
[00043692][12 03][00] v1.10.0.0 -> v1.10.0.0
[00043845][15 00][00] v1.1.2.0 -> v1.1.2.0
[00043946][17 00][00] v1.1.1.7 -> v1.1.1.7
[00044091][17 01][00] v1.0.2.7 -> v1.0.2.7
[00044172][19 00][00] v255.255.255.254 -> v1.0.8.96
[00044226][01 00][00] v1.30.5036 -> v1.30.5036
[00044280][01 01][00] v1.30.5036 -> v1.30.5036
[00044356][08 00][00] v0.13.0.7 -> v0.13.0.7
[00044433][09 00][00] v3.0.0.10 -> v3.0.0.10
[00044485]Packet upgrade cancelled at version checking.



[00013649]========== 2016.05.15 19:01:40. boot(15) ============
[00013705]Packet [C:\P3X_FW_V01.08.0080.bin] detected, card sn [0x2857532b].
[00013761]Packet upgrade start...

[00013815]Packet checking...
[00013873]Packet vlink 01.08.0080 <-> 01.07.0060.
[00014036]Record vlink 01.08.0080 <-> 01.07.0060 (flow = 0).
[00014091]Done.

[00014146]Version checking[1]...
[00014237][03 05][00] v34.2.0.9 -> v34.2.0.9
[00014314][03 06][00] v2.4.14.5 -> v2.4.14.5
[00014385][04 00][00] v1.44.0.0 -> v1.44.0.0
[00014512][11 00][00] v1.7.15.1 -> v1.7.15.1
[00014631][12 00][00] v1.10.0.0 -> v1.10.0.0
[00014732][12 01][00] v1.10.0.0 -> v1.10.0.0
[00014820][12 02][00] v1.10.0.0 -> v1.10.0.0
[00014923][12 03][00] v1.10.0.0 -> v1.10.0.0
[00015075][15 00][00] v1.1.2.0 -> v1.1.2.0
[00015180][17 00][00] v1.1.1.7 -> v1.1.1.7
[00015328][17 01][00] v1.0.2.7 -> v1.0.2.7
[00015400][19 00][00] v255.255.255.254 -> v1.0.8.96
[00015457][01 00][00] v1.30.5036 -> v1.30.5036
[00015514][01 01][00] v1.30.5036 -> v1.30.5036
[00015587][08 00][00] v0.13.0.7 -> v0.13.0.7
[00015662][09 00][00] v3.0.0.10 -> v3.0.0.10
[00015713]Packet upgrade cancelled at version checking.



[00013205]========== 2016.05.15 19:21:14. boot(15) ============
[00013264]Packet [C:\P3X_FW_V01.08.0080.bin] detected, card sn [0x2857532b].
[00013327]Packet upgrade start...

[00013383]Packet checking...
[00013439]Packet vlink 01.08.0080 <-> 01.07.0060.
[00013526]Record vlink 01.08.0080 <-> 01.07.0060 (flow = 0).
[00013577]Done.

[00013634]Version checking[1]...
[00013731][03 05][00] v34.2.0.9 -> v34.2.0.9
[00013831][03 06][00] v2.4.14.5 -> v2.4.14.5
[00013891][04 00][00] v1.44.0.0 -> v1.44.0.0
[00014011][11 00][00] v1.7.15.1 -> v1.7.15.1
[00014124][12 00][00] v1.10.0.0 -> v1.10.0.0
[00014222][12 01][00] v1.10.0.0 -> v1.10.0.0
[00014328][12 02][00] v1.10.0.0 -> v1.10.0.0
[00014422][12 03][00] v1.10.0.0 -> v1.10.0.0
[00014576][15 00][00] v1.1.2.0 -> v1.1.2.0
[00014675][17 00][00] v1.1.1.7 -> v1.1.1.7
[00014815][17 01][00] v1.0.2.7 -> v1.0.2.7
[00014900][19 00][00] v255.255.255.254 -> v1.0.8.96
[00014959][01 00][00] v1.30.5036 -> v1.30.5036
[00015017][01 01][00] v1.30.5036 -> v1.30.5036
[00015082][08 00][00] v0.13.0.7 -> v0.13.0.7
[00015281][09 00][00] v3.0.0.10 -> v3.0.0.10
[00015346]Packet upgrade cancelled at version checking.



[00013201]========== 2016.05.15 19:24:17. boot(15) ============
[00013261]Packet [C:\P3X_FW_V01.08.0080.bin] detected, card sn [0x2857532b].
[00013326]Packet upgrade start...

[00013384]Packet checking...
[00013443]Packet vlink 01.08.0080 <-> 01.07.0060.
[00013505]Record vlink 01.08.0080 <-> 01.07.0060 (flow = 0).
[00013564]Done.

[00013621]Version checking[1]...
[00013732][03 05][00] v34.2.0.9 -> v34.2.0.9
[00013831][03 06][00] v2.4.14.5 -> v2.4.14.5
[00013893][04 00][00] v1.44.0.0 -> v1.44.0.0
[00014031][11 00][00] v1.7.15.1 -> v1.7.15.1
[00014159][12 00][00] v1.10.0.0 -> v1.10.0.0
[00014259][12 01][00] v1.10.0.0 -> v1.10.0.0
[00014360][12 02][00] v1.10.0.0 -> v1.10.0.0
[00014460][12 03][00] v1.10.0.0 -> v1.10.0.0
[00014648][15 00][00] v1.1.2.0 -> v1.1.2.0
[00014755][17 00][00] v1.1.1.7 -> v1.1.1.7
[00014900][17 01][00] v1.0.2.7 -> v1.0.2.7
[00014986][19 00][00] v255.255.255.254 -> v1.0.8.96
[00015051][01 00][00] v1.30.5036 -> v1.30.5036
[00015107][01 01][00] v1.30.5036 -> v1.30.5036
[00015200][08 00][00] v0.13.0.7 -> v0.13.0.7
[00015286][09 00][00] v3.0.0.10 -> v3.0.0.10
[00015351]Packet upgrade cancelled at version checking.



[00013214]========== 2016.05.15 19:36:00. boot(15) ============
[00013271]Packet [C:\P3X_FW_V01.08.0080.bin] detected, card sn [0x2857532b].
[00013335]Packet upgrade start...

[00013398]Packet checking...
[00013461]Packet vlink 01.08.0080 <-> 01.07.0060.
[00013526]Record vlink 01.08.0080 <-> 01.07.0060 (flow = 0).
[00013582]Done.

[00013637]Version checking[1]...
[00013730][03 05][00] v34.2.0.9 -> v34.2.0.9
[00013827][03 06][00] v2.4.14.5 -> v2.4.14.5
[00013888][04 00][00] v1.44.0.0 -> v1.44.0.0
[00014026][11 00][00] v1.7.15.1 -> v1.7.15.1
[00014120][12 00][00] v1.10.0.0 -> v1.10.0.0
[00014247][12 01][00] v1.10.0.0 -> v1.10.0.0
[00014347][12 02][00] v1.10.0.0 -> v1.10.0.0
[00014447][12 03][00] v1.10.0.0 -> v1.10.0.0
[00014745][15 00][00] v1.1.2.0 -> v1.1.2.0
[00014855][17 00][00] v1.1.1.7 -> v1.1.1.7
[00015005][17 01][00] v1.0.2.7 -> v1.0.2.7
[00015091][19 00][00] v255.255.255.254 -> v1.0.8.96
[00015155][01 00][00] v1.30.5036 -> v1.30.5036
[00015212][01 01][00] v1.30.5036 -> v1.30.5036
[00015286][08 00][00] v0.13.0.7 -> v0.13.0.7
[00015371][09 00][00] v3.0.0.10 -> v3.0.0.10
[00015430]Packet upgrade cancelled at version checking.



[00013571]========== 2016.05.15 20:10:07. boot(15) ============
[00013630]Packet [C:\P3X_FW_V01.08.0080.bin] detected, card sn [0x2857532b].
[00013683]Packet upgrade start...

[00013764]Packet checking...
[00013853]Packet vlink 01.08.0080 <-> 01.07.0060.
[00013909]Record vlink 01.08.0080 <-> 01.07.0060 (flow = 0).
[00013972]Done.

[00014031]Version checking[1]...
[00014125][03 05][00] v34.2.0.9 -> v34.2.0.9
[00014252][03 06][00] v2.4.14.5 -> v2.4.14.5
[00014313][04 00][00] v1.44.0.0 -> v1.44.0.0
[00014465][11 00][00] v1.7.15.1 -> v1.7.15.1
[00014586][12 00][00] v1.10.0.0 -> v1.10.0.0
[00014689][12 01][00] v1.10.0.0 -> v1.10.0.0
[00014825][12 02][00] v1.10.0.0 -> v1.10.0.0
[00014928][12 03][00] v1.10.0.0 -> v1.10.0.0
[00015103][15 00][00] v1.1.2.0 -> v1.1.2.0
[00015234][17 00][00] v1.1.1.7 -> v1.1.1.7
[00015389][17 01][00] v1.0.2.7 -> v1.0.2.7
[00015466][19 00][00] v255.255.255.254 -> v1.0.8.96
[00015525][01 00][00] v1.30.5036 -> v1.30.5036
[00015590][01 01][00] v1.30.5036 -> v1.30.5036
[00015663][08 00][00] v0.13.0.7 -> v0.13.0.7
[00015765][09 00][00] v3.0.0.10 -> v3.0.0.10
[00015824]Packet upgrade cancelled at version checking.



[00013895]========== 2016.05.15 22:10:30. boot(15) ============
[00013953]Packet [C:\P3X_FW_V01.08.0080.bin] detected, card sn [0x2857532b].
[00014014]Packet upgrade start...

[00014080]Packet checking...
[00014144]Packet vlink 01.08.0080 <-> 01.07.0060.
[00014209]Record vlink 01.08.0080 <-> 01.07.0060 (flow = 0).
[00014271]Done.

[00014334]Version checking[1]...
[00014555][03 05][00] v34.2.0.9 -> v34.2.0.9
[00014658][03 06][00] v2.4.14.5 -> v2.4.14.5
[00014725][04 00][00] v1.44.0.0 -> v1.44.0.0
[00014858][11 00][00] v1.7.15.1 -> v1.7.15.1
[00014963][12 00][00] v1.10.0.0 -> v1.10.0.0
[00015088][12 01][00] v1.10.0.0 -> v1.10.0.0
[00015198][12 02][00] v1.10.0.0 -> v1.10.0.0
[00015303][12 03][00] v1.10.0.0 -> v1.10.0.0
[00015479][15 00][00] v1.1.2.0 -> v1.1.2.0
[00015599][17 00][00] v1.1.1.7 -> v1.1.1.7
[00015744][17 01][00] v1.0.2.7 -> v1.0.2.7
[00015833][19 00][00] v255.255.255.254 -> v1.0.8.96
[00015893][01 00][00] v1.30.5036 -> v1.30.5036
[00015962][01 01][00] v1.30.5036 -> v1.30.5036
[00016036][08 00][00] v0.13.0.7 -> v0.13.0.7
[00016114][09 00][00] v3.0.0.10 -> v3.0.0.10
[00016179]Packet upgrade cancelled at version checking.



[00013377]========== 2016.05.15 22:47:51. boot(15) ============
[00013443]Packet [C:\P3X_FW_V01.08.0080.bin] detected, card sn [0x2857532b].
[00013506]Packet upgrade start...

[00013576]Packet checking...
[00013645]Packet vlink 01.08.0080 <-> 01.07.0060.
[00013713]Record vlink 01.08.0080 <-> 01.07.0060 (flow = 0).
[00013777]Done.

[00013843]Version checking[1]...
[00013939][03 05][00] v34.2.0.9 -> v34.2.0.9
[00014042][03 06][00] v2.4.14.5 -> v2.4.14.5
[00014118][04 00][00] v1.44.0.0 -> v1.44.0.0
[00014263][11 00][00] v1.7.15.1 -> v1.7.15.1
[00014372][12 00][00] v1.10.0.0 -> v1.10.0.0
[00014500][12 01][00] v1.10.0.0 -> v1.10.0.0
[00014608][12 02][00] v1.10.0.0 -> v1.10.0.0
[00014733][12 03][00] v1.10.0.0 -> v1.10.0.0
[00014912][15 00][00] v1.1.2.0 -> v1.1.2.0
[00015023][17 00][00] v1.1.1.7 -> v1.1.1.7
[00015178][17 01][00] v1.0.2.7 -> v1.0.2.7
[00015264][19 00][00] v255.255.255.254 -> v1.0.8.96
[00015322][01 00][00] v1.30.5036 -> v1.30.5036
[00015383][01 01][00] v1.30.5036 -> v1.30.5036
[00015477][08 00][00] v0.13.0.7 -> v0.13.0.7
[00015564][09 00][00] v3.0.0.10 -> v3.0.0.10
[00015624]Packet upgrade cancelled at version checking.



[00013377]========== 2016.05.15 22:56:19. boot(15) ============
[00013524]Packet [C:\P3X_FW_V01.08.0080.bin] detected, card sn [0x2857532b].
[00013587]Packet upgrade start...

[00013657]Packet checking...
[00013727]Packet vlink 01.08.0080 <-> 01.07.0060.
[00013788]Record vlink 01.08.0080 <-> 01.07.0060 (flow = 0).
[00013854]Done.

[00013917]Version checking[1]...
[00014014][03 05][00] v34.2.0.9 -> v34.2.0.9
[00014133][03 06][00] v2.4.14.5 -> v2.4.14.5
[00014200][04 00][00] v1.44.0.0 -> v1.44.0.0
[00014351][11 00][00] v1.7.15.1 -> v1.7.15.1
[00014460][12 00][00] v1.10.0.0 -> v1.10.0.0
[00014560][12 01][00] v1.10.0.0 -> v1.10.0.0
[00014660][12 02][00] v1.10.0.0 -> v1.10.0.0
[00014760][12 03][00] v1.10.0.0 -> v1.10.0.0
[00014915][15 00][00] v1.1.2.0 -> v1.1.2.0
[00015037][17 00][00] v1.1.1.7 -> v1.1.1.7
[00015176][17 01][00] v1.0.2.7 -> v1.0.2.7
[00015277][19 00][00] v255.255.255.254 -> v1.0.8.96
[00015342][01 00][00] v1.30.5036 -> v1.30.5036
[00015409][01 01][00] v1.30.5036 -> v1.30.5036
[00015501][08 00][00] v0.13.0.7 -> v0.13.0.7
[00015573][09 00][00] v3.0.0.10 -> v3.0.0.10
[00015637]Packet upgrade cancelled at version checking.



[00013361]========== 2016.05.15 23:17:13. boot(15) ============
[00013422]Packet [C:\P3X_FW_V01.08.0080.bin] detected, card sn [0x2857532b].
[00013486]Packet upgrade start...

[00013555]Packet checking...
[00013622]Packet vlink 01.08.0080 <-> 01.07.0060.
[00013687]Record vlink 01.08.0080 <-> 01.07.0060 (flow = 0).
[00013752]Done.

[00013819]Version checking[1]...
[00013929][03 05][00] v34.2.0.9 -> v34.2.0.9
[00014029][03 06][00] v2.4.14.5 -> v2.4.14.5
[00014104][04 00][00] v1.44.0.0 -> v1.44.0.0
[00014249][11 00][00] v1.7.15.1 -> v1.7.15.1
[00014354][12 00][00] v1.10.0.0 -> v1.10.0.0
[00014453][12 01][00] v1.10.0.0 -> v1.10.0.0
[00014560][12 02][00] v1.10.0.0 -> v1.10.0.0
[00014660][12 03][00] v1.10.0.0 -> v1.10.0.0
[00014813][15 00][00] v1.1.2.0 -> v1.1.2.0
[00014912][17 00][00] v1.1.1.7 -> v1.1.1.7
[00015172][17 01][00] v1.0.2.7 -> v1.0.2.7
[00015275][19 00][00] v255.255.255.254 -> v1.0.8.96
[00015345][01 00][00] v1.30.5036 -> v1.30.5036
[00015412][01 01][00] v1.30.5036 -> v1.30.5036
[00015499][08 00][00] v0.13.0.7 -> v0.13.0.7
[00015573][09 00][00] v3.0.0.10 -> v3.0.0.10
[00015642]Packet upgrade cancelled at version checking.



[00040892]========== remo-con disconnect. boot(15) ============
[00040955]Packet [C:\P3X_FW_V01.08.0080.bin] detected, card sn [0x2857532b].
[00041025]Packet upgrade start...

[00041095]Packet checking...
[00041166]Packet vlink 01.08.0080 <-> 01.07.0060.
[00041232]Record vlink 01.08.0080 <-> 01.07.0060 (flow = 0).
[00041295]Done.

[00041365]Version checking[1]...
[00041484][03 05][00] v34.2.0.9 -> v34.2.0.9
[00041580][03 06][00] v2.4.14.5 -> v2.4.14.5
[00041656][04 00][00] v1.44.0.0 -> v1.44.0.0
[00041801][11 00][00] v1.7.15.1 -> v1.7.15.1
[00041929][12 00][00] v1.10.0.0 -> v1.10.0.0
[00042054][12 01][00] v1.10.0.0 -> v1.10.0.0
[00042168][12 02][00] v1.10.0.0 -> v1.10.0.0
[00042293][12 03][00] v1.10.0.0 -> v1.10.0.0
[00042476][15 00][00] v1.1.2.0 -> v1.1.2.0
[00042589][17 00][00] v1.1.1.7 -> v1.1.1.7
[00042754][17 01][00] v1.0.2.7 -> v1.0.2.7
[00042861][19 00][00] v255.255.255.254 -> v1.0.8.96
[00042924][01 00][00] v1.30.5036 -> v1.30.5036
[00042988][01 01][00] v1.30.5036 -> v1.30.5036
[00043065][08 00][00] v0.13.0.7 -> v0.13.0.7
[00043141][09 00][00] v3.0.0.10 -> v3.0.0.10
[00043205]Packet upgrade cancelled at version checking.



[00014901]========== 2016.05.16 07:31:37. boot(15) ============
[00014968]Packet [C:\P3X_FW_V01.08.0080.bin] detected, card sn [0x2857532b].
[00015032]Packet upgrade start...

[00015099]Packet checking...
[00015168]Packet vlink 01.08.0080 <-> 01.07.0060.
[00015232]Record vlink 01.08.0080 <-> 01.07.0060 (flow = 0).
[00015301]Done.

[00015388]Version checking[1]...
[00015500][03 05][00] v34.2.0.9 -> v34.2.0.9
[00015601][03 06][00] v2.4.14.5 -> v2.4.14.5
[00015680][04 00][00] v1.44.0.0 -> v1.44.0.0
[00015940][11 00][00] v1.7.15.1 -> v1.7.15.1
[00016044][12 00][00] v1.10.0.0 -> v1.10.0.0
[00016144][12 01][00] v1.10.0.0 -> v1.10.0.0
[00016249][12 02][00] v1.10.0.0 -> v1.10.0.0
[00016380][12 03][00] v1.10.0.0 -> v1.10.0.0
[00016564][15 00][00] v1.1.2.0 -> v1.1.2.0
[00016683][17 00][00] v1.1.1.7 -> v1.1.1.7
[00016829][17 01][00] v1.0.2.7 -> v1.0.2.7
[00016900][19 00][00] v255.255.255.254 -> v1.0.8.96
[00016969][01 00][00] v1.30.5036 -> v1.30.5036
[00017038][01 01][00] v1.30.5036 -> v1.30.5036
[00017126][08 00][00] v0.13.0.7 -> v0.13.0.7
[00017198][09 00][00] v3.0.0.10 -> v3.0.0.10
[00017266]Packet upgrade cancelled at version checking.



[00013535]========== 2016.05.16 07:35:19. boot(15) ============
[00013599]Packet [C:\P3X_FW_V01.08.0080.bin] detected, card sn [0x2857532b].
[00013671]Packet upgrade start...

[00013742]Packet checking...
[00013813]Packet vlink 01.08.0080 <-> 01.07.0060.
[00013880]Record vlink 01.08.0080 <-> 01.07.0060 (flow = 0).
[00013948]Done.

[00014015]Version checking[1]...
[00014133][03 05][00] v34.2.0.9 -> v34.2.0.9
[00014234][03 06][00] v2.4.14.5 -> v2.4.14.5
[00014311][04 00][00] v1.44.0.0 -> v1.44.0.0
[00014460][11 00][00] v1.7.15.1 -> v1.7.15.1
[00014581][12 00][00] v1.10.0.0 -> v1.10.0.0
[00014713][12 01][00] v1.10.0.0 -> v1.10.0.0
[00014824][12 02][00] v1.10.0.0 -> v1.10.0.0
[00014948][12 03][00] v1.10.0.0 -> v1.10.0.0
[00015106][15 00][00] v1.1.2.0 -> v1.1.2.0
[00015232][17 00][00] v1.1.1.7 -> v1.1.1.7
[00015402][17 01][00] v1.0.2.7 -> v1.0.2.7
[00015510][19 00][00] v255.255.255.254 -> v1.0.8.96
[00015576][01 00][00] v1.30.5036 -> v1.30.5036
[00015648][01 01][00] v1.30.5036 -> v1.30.5036
[00015726][08 00][00] v0.13.0.7 -> v0.13.0.7
[00015807][09 00][00] v3.0.0.10 -> v3.0.0.10
[00015874]Packet upgrade cancelled at version checking.



[00013385]========== 2016.05.16 16:38:50. boot(15) ============
[00013447]Packet [C:\P3X_FW_V01.08.0080.bin] detected, card sn [0x2857532b].
[00013614]Packet upgrade start...

[00013681]Packet checking...
[00013743]Packet vlink 01.08.0080 <-> 01.07.0060.
[00013804]Record vlink 01.08.0080 <-> 01.07.0060 (flow = 0).
[00013866]Done.

[00013927]Version checking[1]...
[00014047][03 05][00] v34.2.0.9 -> v34.2.0.9
[00014146][03 06][00] v2.4.14.5 -> v2.4.14.5
[00014213][04 00][00] v1.44.0.0 -> v1.44.0.0
[00014367][11 00][00] v1.7.15.1 -> v1.7.15.1
[00014510][12 00][00] v1.10.0.0 -> v1.10.0.0
[00014610][12 01][00] v1.10.0.0 -> v1.10.0.0
[00014735][12 02][00] v1.10.0.0 -> v1.10.0.0
[00014850][12 03][00] v1.10.0.0 -> v1.10.0.0
[00015001][15 00][00] v1.1.2.0 -> v1.1.2.0
[00015129][17 00][00] v1.1.1.7 -> v1.1.1.7
[00015290][17 01][00] v1.0.2.7 -> v1.0.2.7
[00015378][19 00][00] v255.255.255.254 -> v1.0.8.96
[00015443][01 00][00] v1.30.5036 -> v1.30.5036
[00015506][01 01][00] v1.30.5036 -> v1.30.5036
[00015588][08 00][00] v0.13.0.7 -> v0.13.0.7
[00015675][09 00][00] v3.0.0.10 -> v3.0.0.10
[00015736]Packet upgrade cancelled at version checking.



[00013442]========== 2016.05.16 17:35:46. boot(15) ============
[00013509]Packet [C:\P3X_FW_V01.08.0080.bin] detected, card sn [0x2857532b].
[00013573]Packet upgrade start...

[00013653]Packet checking...
[00013722]Packet vlink 01.08.0080 <-> 01.07.0060.
[00013793]Record vlink 01.08.0080 <-> 01.07.0060 (flow = 0).
[00013861]Done.

[00013928]Version checking[1]...
[00014029][03 05][00] v34.2.0.9 -> v34.2.0.9
[00014129][03 06][00] v2.4.14.5 -> v2.4.14.5
[00014215][04 00][00] v1.44.0.0 -> v1.44.0.0
[00014350][11 00][00] v1.7.15.1 -> v1.7.15.1
[00014453][12 00][00] v1.10.0.0 -> v1.10.0.0
[00014575][12 01][00] v1.10.0.0 -> v1.10.0.0
[00014709][12 02][00] v1.10.0.0 -> v1.10.0.0
[00014818][12 03][00] v1.10.0.0 -> v1.10.0.0
[00014982][15 00][00] v1.1.2.0 -> v1.1.2.0
[00015098][17 00][00] v1.1.1.7 -> v1.1.1.7
[00015258][17 01][00] v1.0.2.7 -> v1.0.2.7
[00015345][19 00][00] v255.255.255.254 -> v1.0.8.96
[00015409][01 00][00] v1.30.5036 -> v1.30.5036
[00015583][01 01][00] v1.30.5036 -> v1.30.5036
[00015675][08 00][00] v0.13.0.7 -> v0.13.0.7
[00015765][09 00][00] v3.0.0.10 -> v3.0.0.10
[00015839]Packet upgrade cancelled at version checking.



[00013990]========== 2016.05.16 17:48:38. boot(15) ============
[00014064]Packet [C:\P3X_FW_V01.08.0080.bin] detected, card sn [0x2857532b].
[00014136]Packet upgrade start...

[00014208]Packet checking...
[00014282]Packet vlink 01.08.0080 <-> 01.07.0060.
[00014352]Record vlink 01.08.0080 <-> 01.07.0060 (flow = 0).
[00014426]Done.

[00014507]Version checking[1]...
[00014622][03 05][00] v34.2.0.9 -> v34.2.0.9
[00014742][03 06][00] v2.4.14.5 -> v2.4.14.5
[00014821][04 00][00] v1.44.0.0 -> v1.44.0.0
[00014983][11 00][00] v1.7.15.1 -> v1.7.15.1
[00015122][12 00][00] v1.10.0.0 -> v1.10.0.0
[00015250][12 01][00] v1.10.0.0 -> v1.10.0.0
[00015366][12 02][00] v1.10.0.0 -> v1.10.0.0
[00015522][12 03][00] v1.10.0.0 -> v1.10.0.0
[00015706][15 00][00] v1.1.2.0 -> v1.1.2.0
[00015825][17 00][00] v1.1.1.7 -> v1.1.1.7
[00015987][17 01][00] v1.0.2.7 -> v1.0.2.7
[00016077][19 00][00] v255.255.255.254 -> v1.0.8.96
[00016151][01 00][00] v1.30.5036 -> v1.30.5036
[00016214][01 01][00] v1.30.5036 -> v1.30.5036
[00016309][08 00][00] v0.13.0.7 -> v0.13.0.7
[00016397][09 00][00] v3.0.0.10 -> v3.0.0.10
[00016471]Packet upgrade cancelled at version checking.



[00380959]========== remo-con disconnect. boot(15) ============
[00381033]Packet [C:\P3X_FW_V01.08.0080.bin] detected, card sn [0x2857532b].
[00381106]Packet upgrade start...

[00381186]Packet checking...
[00381258]Packet vlink 01.08.0080 <-> 01.07.0060.
[00381332]Record vlink 01.08.0080 <-> 01.07.0060 (flow = 0).
[00381400]Done.

[00381471]Version checking[1]...
[00381577][03 05][00] v34.2.0.9 -> v34.2.0.9
[00381677][03 06][00] v2.4.14.5 -> v2.4.14.5
[00381751][04 00][00] v1.44.0.0 -> v1.44.0.0
[00381897][11 00][00] v1.7.15.1 -> v1.7.15.1
[00382006][12 00][00] v1.10.0.0 -> v1.10.0.0
[00382245][12 01][00] v1.10.0.0 -> v1.10.0.0
[00382346][12 02][00] v1.10.0.0 -> v1.10.0.0
[00382449][12 03][00] v1.10.0.0 -> v1.10.0.0
[00382621][15 00][00] v1.1.2.0 -> v1.1.2.0
[00382766][17 00][00] v1.1.1.7 -> v1.1.1.7
[00382932][17 01][00] v1.0.2.7 -> v1.0.2.7
[00383026][19 00][00] v255.255.255.254 -> v1.0.8.96
[00383095][01 00][00] v1.30.5036 -> v1.30.5036
[00383169][01 01][00] v1.30.5036 -> v1.30.5036
[00383253][08 00][00] v0.13.0.7 -> v0.13.0.7
[00383346][09 00][00] v3.0.0.10 -> v3.0.0.10
[00383421]Packet upgrade cancelled at version checking.



[00014856]========== remo-con disconnect. boot(15) ============
[00014927]Packet [C:\P3X_FW_V01.08.0080.bin] detected, card sn [0x017e4e1f].
[00015000]Packet upgrade start...

[00015082]Packet checking...
[00015152]Packet vlink 01.08.0080 <-> 01.07.0060.
[00015226]Record vlink 01.08.0080 <-> 01.07.0060 (flow = 0).
[00015296]Done.

[00015373]Version checking[1]...
[00015476][03 05][00] v34.2.0.9 -> v34.2.0.9
[00015595][03 06][00] v2.4.14.5 -> v2.4.14.5
[00015671][04 00][00] v1.44.0.0 -> v1.44.0.0
[00015843][11 00][00] v1.7.15.1 -> v1.7.15.1
[00015961][12 00][00] v1.10.0.0 -> v1.10.0.0
[00016069][12 01][00] v1.10.0.0 -> v1.10.0.0
[00016190][12 02][00] v1.10.0.0 -> v1.10.0.0
[00016320][12 03][00] v1.10.0.0 -> v1.10.0.0
[00016499][15 00][00] v1.1.2.0 -> v1.1.2.0
[00016603][17 00][00] v1.1.1.7 -> v1.1.1.7
[00016744][17 01][00] v1.0.2.7 -> v1.0.2.7
[00016830][19 00][00] v255.255.255.254 -> v1.0.8.96
[00016909][01 00][00] v1.30.5036 -> v1.30.5036
[00016980][01 01][00] v1.30.5036 -> v1.30.5036
[00017072][08 00][00] v0.13.0.7 -> v0.13.0.7
[00017170][09 00][00] v3.0.0.10 -> v3.0.0.10
[00017244]Packet upgrade cancelled at version checking.



[00014524]========== 2016.05.16 19:32:50. boot(15) ============
[00014593]Packet [C:\P3X_FW_V01.08.0080.bin] detected, card sn [0x2857532b].
[00014662]Packet upgrade start...

[00014742]Packet checking...
[00014813]Packet vlink 01.08.0080 <-> 01.07.0060.
[00014987]Record vlink 01.08.0080 <-> 01.07.0060 (flow = 0).
[00015063]Done.

[00015134]Version checking[1]...
[00015230][03 05][00] v34.2.0.9 -> v34.2.0.9
[00015329][03 06][00] v2.4.14.5 -> v2.4.14.5
[00015411][04 00][00] v1.44.0.0 -> v1.44.0.0
[00020575][11 00][00] v1.7.15.1 -> v1.7.15.1
[00020702][12 00][00] v1.10.0.0 -> v1.10.0.0
[00020828][12 01][00] v1.10.0.0 -> v1.10.0.0
[00020962][12 02][00] v1.10.0.0 -> v1.10.0.0
[00021094][12 03][00] v1.10.0.0 -> v1.10.0.0
[00021268][15 00][00] v1.1.2.0 -> v1.1.2.0
[00021398][17 00][00] v1.1.1.7 -> v1.1.1.7
[00021559][17 01][00] v1.0.2.7 -> v1.0.2.7
[00021648][19 00][00] v255.255.255.254 -> v1.0.8.96
[00021727][01 00][00] v1.30.5036 -> v1.30.5036
[00021795][01 01][00] v1.30.5036 -> v1.30.5036
[00021892][08 00][00] v0.13.0.7 -> v0.13.0.7
[00021989][09 00][00] v3.0.0.10 -> v3.0.0.10
[00022062]Packet upgrade cancelled at version checking.



[00014875]========== remo-con disconnect. boot(15) ============
[00014947]Packet [C:\P3X_FW_V01.08.0080.bin] detected, card sn [0x017e4e1f].
[00015014]Packet upgrade start...

[00015091]Packet checking...
[00015165]Packet vlink 01.08.0080 <-> 01.07.0060.
[00015240]Record vlink 01.08.0080 <-> 01.07.0060 (flow = 0).
[00015311]Done.

[00015392]Version checking[1]...
[00015506][03 05][00] v34.2.0.9 -> v34.2.0.9
[00015628][03 06][00] v2.4.14.5 -> v2.4.14.5
[00015711][04 00][00] v1.44.0.0 -> v1.44.0.0
[00015866][11 00][00] v1.7.15.1 -> v1.7.15.1
[00015995][12 00][00] v1.10.0.0 -> v1.10.0.0
[00016115][12 01][00] v1.10.0.0 -> v1.10.0.0
[00016246][12 02][00] v1.10.0.0 -> v1.10.0.0
[00016358][12 03][00] v1.10.0.0 -> v1.10.0.0
[00016535][15 00][00] v1.1.2.0 -> v1.1.2.0
[00016654][17 00][00] v1.1.1.7 -> v1.1.1.7
[00016810][17 01][00] v1.0.2.7 -> v1.0.2.7
[00016906][19 00][00] v255.255.255.254 -> v1.0.8.96
[00016978][01 00][00] v1.30.5036 -> v1.30.5036
[00017054][01 01][00] v1.30.5036 -> v1.30.5036
[00017142][08 00][00] v0.13.0.7 -> v0.13.0.7
[00017366][09 00][00] v3.0.0.10 -> v3.0.0.10
[00017440]Packet upgrade cancelled at version checking.

joakim Posted at 2016-5-17 03:06
It didn't do anything and the logs tells that is the same version.

it looks like you are updated to 1.8 on the aircraft.
Can you post a video showing the aircraft showing warming up then RC signal lost.
We can downgrade your RC to 1.5.8 then take it back to 1.6.

DJI-Ken Posted at 2016-5-16 21:29
it looks like you are updated to 1.8 on the aircraft.
Can you post a video showing the aircraft sh ...

joakim Posted at 2016-5-17 03:49
https://youtu.be/OwnvRMWqd7A

OK, it appears the RC is still on 1.5.8.
Can you get into the RC firmware page and post a screenshot?
Aircraft powered OFF, RC and app on and USB cable connected. From the home page, press the graduation hat for 5-10 seconds and that should take you into the firmware page. Can you do that then post a screenshot.

DJI-Ken Posted at 2016-5-16 22:49
OK, it appears the RC is still on 1.5.8.
Can you get into the RC firmware page and post a screensh ...

I finally got it working!!!!! YES!!!! Dancing :-)

This is what I did.
1. Made a reset of my iPad (factory reset after backup at iCloud)
2. Restore from iCloud
3. Guess what I got? The same connection problem with the "How to connect" screen.
4. Updated the iPad to iOS 9.3.2
5. Connected the controller and pressed C1 in General settings, got the question about connection
6. Started the app and the controller was connected
7. Started the aircraft, and during warming up i got a message of firmware update for the RC
8. I turned the copter off
9. Updated the firmware on the RC from version 1.1.5 (!) -> 1.6.0
10. Restarted RC
11. Starting the copter and everything was working.

Little low gps signal but i am inside my house so thats normal. I managed to get Ready to fly in beginners mode with 8 satellites shorter period.
I also tested my iPhone and I cannot se the firmware versions in the aboutpage as I now can in the iPad. I will reset my phone aswell to see if that will work.

I will try flying tomorrow if its not raining like today.

Thanks everybody for your help and I hope this can help somone else!

I'm still having trouble even after updating to 932

joakim Posted at 2016-5-17 05:04
I finally got it working!!!!! YES!!!! Dancing :-)

This is what I did.

Nice, glad it's all up and running for you.
Updating to 9.3.2 was it

DJI-Ken Posted at 2016-5-16 23:47
Nice, glad it's all up and running for you.
Updating to 9.3.2 was it

Yes, but I started with upgrading my iPhone and that didn't solve it. I am now restoring the phone also to see if i can connect properly before using it to fly with. After all upgrades of the iPad i could see the versions in the "About" page in DJI Go as i couldn't before.