I have a phantom 2 vision plus had a light crash but now when I idle up to take off it goes wide open and tries to fly away! any help on what I need to replace would be very helpful. Thanks

Did you recalibrate your flight controls in both the TX and the Phantom?

Unfortunately without a detailed description or a video of the problem, all we can do is speculate as to what the problem is.
But I would start with an advanced IMU calibration and check the compass on the leg is still straight.

Have done all that! When I ease up rpm at certain point it goes wide open and cant stabilize it's self. could it be the flight controller?

Software tells me nothing is wrong. And everything looks fine compass numbers an imu cal is fine.

Does this happen in ATTI mode also?

droneflyers.com Posted at 2015-1-30 08:47
Does this happen in ATTI mode also?

I got It fixed didn't rely do anything ! put one prop at a time on and ran motors! it fly's fine now!! I got a v3 now to and updated to ver 310 now controller camera knob does not work nor does the iPhone any ideas on that?
Thanks for the reply !!!