Hi guys,

I'm running my P3A and controller on the latest firmware. Also using the latest IOS app on my iPhone 6s (and ipad air). Today I got the no image transmission error. It seems more people are affected by this. Is there a solution yet?

Thanks for reporting. I also have the same setup and issue as you as I reported in another thread.

rreindl Posted at 2016-6-5 02:28
Thanks for reporting. I also have the same setup and issue as you as I reported in another thread.

Kill app and reboot everything. That took care of it for me. IMU cal recommended.
Just did a 3 mile mission with no hiccups. Go app and Litchi.

Just did a reinstall of the latest firmware. Now everything seems to be working again.

3mpty Posted at 2016-6-5 03:36
Just did a reinstall of the latest firmware. Now everything seems to be working again.

Great to hear you're up and running again.

Still not working. It worked for only a moment, now I can't get it working again. My drone boots up, beeps one or two times and then the camera "drops" and points down. How can I fix this?

Rnfaust Posted at 2016-6-5 03:25
Kill app and reboot everything. That took care of it for me. IMU cal recommended.
Just did a 3 mil ...

This only happens randomly and only two times in the past week.Yes I did reboot everything.

rreindl Posted at 2016-6-5 15:38
This only happens randomly and only two times in the past week.Yes I did reboot everything.

I got my p3a this week. Only had 3 succesful flights so far without the error

And by the way Ive tried:

Reboot all;
Change cables;
Error on both ipad and iphone;
Changed batteries;
Reinstalled firmware p3;
Etc. So ive tried every possible trial and error method..

Sometimes the signal pops up and I have an image and a few seconds later it goes away again.

DJI Support, can you please look at my issue? I'm now trying to downgrade to 1.7. What are my other options?

3mpty Posted at 2016-6-5 22:11
And by the way Ive tried:

Reboot all;

I guess  you tried uninstalling and reinstalling the DJI Go app?  

huntcool001@gma Posted at 2016-6-6 12:06
I guess  you tried uninstalling and reinstalling the DJI Go app?

I did.. I also did a fresh install on an Android device. Same problem!

3mpty Posted at 2016-6-6 20:11
I did.. I also did a fresh install on an Android device. Same problem!

I would contact DJI support then, because you tried everything you can.

huntcool001@gma Posted at 2016-6-6 13:13
I would contact DJI support then, because you tried everything you can.

I hope they will respond here. There are more users reporting the same issue I have.

Small update. I managed to downgrade my p3a to firmware 1.7 and the rc to 1.5.8. Now everything seems to be working. Left the bird stationary for about one hour and also swapped sd cards, batteries and turned things on and off in random orders. Still no issues. I have not yet flown, but the video transmission seems to work now.

So for people who still have the no video feed bug try my option!