bcdebusk
lvl.1
United States
Offline
|
- Lightbridge 2 plugged directly into A3 Controller
Channels 1-4 (AETR) map to sticks. Oddly enough, "Mode 2" does not correctly map the sticks though. Simply settting it to Mode 2 still leaves the Throttle assigned to the right-side stick. But it doesn't really look like Mode 1 either. It's just odd. Channels 1-4 have to be individually chosen and mapped, but it can be done.
Flight mode switch on transmitter can map to flight modes, but they don't correspond to the correct modes (and it isn't a calibration issue -- I calibrated them correctly)
And here's the odd thing: The landing gear button doesn't map to channel 5. Flip the button and it does nothing. And the Go Home button doesn't map to channel 6. Pressing it does nothing. But if you assign the corresponding functions to their correct channels (5 and 6 respectively), they both map to the wheel on the left-side of the reciever (the wheel that doesn't click).
What could be happending here? I did the 6/6/16 upgrade last night. Could this be a problem with the upgrade? It's like the Light Bridge 2 is "almost" correctly talking with the controller.
Thanks in advance,
Brian
|
|