Please select Into the mobile phone version | Continue to access the computer ver.
Inspire 1 antenna cable/connector
1669 8 2016-6-10
Uploading and Loding Picture ...(0/1)
o(^-^)o
Hardkor455
lvl.1

United States
Offline

What type of coaxial cable and connector is attached to the antenna in the landing skid of the Inspire 1. I need to replace it.

Thanks
2016-6-10
Use props
Cougar1
First Officer
Flight distance : 924393 ft
  • >>>
Canada
Offline

No connector in the landing gear/foot, antenna cable is soldered on.
2016-6-10
Use props
Hardkor455
lvl.1

United States
Offline

Right, but the other end has a connector, what type connector is it? And is the cable RG178?
2016-6-10
Use props
Hardkor455
lvl.1

United States
Offline

Cougar1 Posted at 2016-6-10 07:17
No connector in the landing gear/foot, antenna cable is soldered on.

No duh. There are 2 ends to that cable, one in the landing skid and one in the body. What type connector is in the body?
2016-6-10
Use props
Cougar1
First Officer
Flight distance : 924393 ft
  • >>>
Canada
Offline

Hardkor455 Posted at 2016-6-10 15:11
No duh. There are 2 ends to that cable, one in the landing skid and one in the body. What type con ...

Thought you where referring to the "Landing skid" as per your post, sorry have no idea what connector in the other end.
2016-6-10
Use props
RichJ53
Captain
Flight distance : 1773274 ft
  • >>>
United States
Offline

Here are some similar antenna wires used in the hobby for 2.4 receivers

http://www.ebay.com/itm/20X-FrSk ... :g:vdIAAOSw5IJWdGZ5

The connector is used for antennas  in the computer laptop Wi-Fi boards too


See this complete part for sale on eBay

http://www.ebay.com/itm/DJI-Insp ... -T601-/331866423971

Rich
2016-6-10
Use props
DeadpoolSexyMFr
lvl.1
Flight distance : 37408 ft
United States
Offline

The Inspire 1 uses what's called an MMCX (micro-miniature coaxial) to connect the coaxial to the flight controller and the other end of the cable (where it attaches to the antenna on the landing gear) is soldered directly on. If your buying a connector to use on the end of the cable make sure you buy the MMCX MALE type. As for the coax cable DJI uses I don't know for sure, but I'm pretty sure you could get away with RG179 or 178. I actually modified all 4 of mine and used RG58 and it works way better.
2018-11-27
Use props
TruGreen
Captain
Flight distance : 518937 ft
  • >>>
United States
Offline

i have a pair brand new never used if interested
2018-11-28
Use props
P38Productions
lvl.1

United States
Offline

Hi I was reassembling my Inspire 1 after a crash and broke the MMCX connector and pin. Would these connectors from showmecables  work as a replacement?
5-15 12:59
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules