This method I have tested in P3S , also should work phantom 3 others and phantom 4..  this is the way to connect phantom 3 to computers.. TO SOLVE FIRMWARE ISSUES, the only thing we want now is healthy drone files from uninfected drone from someone here.. then we can add those files to the drones that have firmware issues, so if there are programmers Please help to crack this..

What you need is power up your remote and aircarft.
Connect with your laptop to the PHANTOM3XXXX wifi
Open up your favorite FTP client. (like FileZilla)  There are plenty free ones if you don't have one.
Connect to IP or Host (same thing in this manner) : 192.168.1.1  (for the RC)
Username : root
Password : Big~9China

Once you connect enter the /etc/init.d folder. Interesting files there. ( for RC controls)

and for now I know how to change CE mode FCC.. if you guys want to know it.. comment down below.. I will tell you guys.. it will be really important to specially EU customers..

Here are login details for everything..
[size=14.6667px]

This unethical behavior ought to get you shown the door...
If not, then, who cares... Hahaha


RedHotPoker

Boys we've hit the mother load

Those modes are set according to laws in your country.

AG0N-Gary Posted at 2016-6-11 07:12
Those modes are set according to laws in your country.

but it can be changed bro.. I have already done it.. and  for sure there will be no one to check the mode you are in..

For Heavens Sake, why wouldn't DJI want to release a downloadable application for Windows or Linux?  If you could stream FPV to your Windows or Linux laptop via WiFi, how Golden would that be?
Imagine flying in a public park and letting passers-by and onlookers see what your drone sees in real time on you laptop computer set up on a picnic bench.  I think that would go a long way towards fostering a good relationship between drone owners and the general public.     

Steve

the init.d folder is just a load of scripts to loadup at start time or delayed, the different services required to operate. editing those in any way could cause some serious damage. nice find though.,

Sliquid Posted at 2016-6-11 08:09
the init.d folder is just a load of scripts to loadup at start time or delayed, the different servic ...

that is why I asked for some programmers bro.... all the programmers did not know how to connect Phantom main board and RC to telnet.. now it has been solved..   but for sure I know how to change from CE to FCC though..  

one_square_nut Posted at 2016-6-11 08:05
For Heavens Sake, why wouldn't DJI want to release a downloadable application for Windows or Linux?  ...

you already can do it bro.. Just download Blustack android emulator for windows. after that you can run android programs on windows.. so you can install DJI go app on your laptop.. problem solved.. you can you can bring your laptop to park..

hi .congratulation for the big secret cracked . i m reek from india . i have p 3 s . i also have signal week issue. after updating my firmware. i suffering during 5 months but no solution . now i see your methode . but frankly speaking mera itna knowledge nehihe technically so plz help me to crack this . my mail id soumyajyoti.only@gmail.com. plz contact me bro.
      

yes please tell me how to change from CE to FCC...!

are there any programmer here????

I want to know CE->FCC.

carlo_CH Posted at 2016-6-11 08:13
yes please tell me how to change from CE to FCC...!

Move to USA, then you get FCC.

imdilanvlogs@gm Posted at 2016-6-11 03:46
but it can be changed bro.. I have already done it.. and  for sure there will be no one to check t ...

alright, so please tell us HOW to change it.

imdilanvlogs@gm Posted at 2016-6-11 23:22
are there any programmer here????

See if you can post to drone forums....not to DJI site...you may have more luck on that forum, good job BTW!!!

imdilanvlogs@gm Posted at 2016-6-11 05:59
you already can do it bro.. Just download Blustack android emulator for windows. after that you ca ...

do we need a laptop for flying phantom in fcc mode at the field? what if we changed the mode from ce to fcc at home. fc will receive the gps location from the phone or tablet and set itself automatically ce or fcc again. do i wrong?
just onnected to rc via filezilla and found the etc folder. so how to change this mode?

I'm interested in changing CE to FCC  . are you going to post or is it private message?

Be careful what you do in there. A few people over at the other forum are bricking their remotes (would no longer provide hotspot funtion for the aircraft to bind to).

i bought a P3P in US. Is it gonna operate with FCC or CE when i bring it home to Germany?

Sebb Posted at 2016-6-17 10:52
i bought a P3P in US. Is it gonna operate with FCC or CE when i bring it home to Germany?

CE, it checks gps position and then it will switch from FCC to CE.

thanks for fast reply.
and that takes it from 100mW down to 25mW?

Please make a guide on how to change CE mode FCC, I am very interested!

Also interested, but how to connect P3P? It have no wifi, but USB.

Using root and PW = Big~9China
I connect to the ac wifi and it opens /tmp folder.
tmp has 3 question marked subdirectories... Lock, Log and Run.
I do not seem to be able to get a directory listing for the root directory.
and attempting to open any of tmp's subdirectories results in a timeout error.