Please select Into the mobile phone version | Continue to access the computer ver.
(2016-06-16) A3 Release Note
1430 2 2016-6-13
Uploading and Loding Picture ...(0/1)
o(^-^)o
DJI-Adela
DJI team

Hong Kong
Offline

A3 image.jpg

A3 Release Note


  
Date :
2016/06/13
   
DJI GO App Version :
   
   
iOS 2.8.3, Android 2.8.1
   
   
DJI Assistant 2 Version :
   
   
1.0.4
   
Flight Controller Firmware Version :
1.3.0.0
  
  
What’s New
  
1.  Added support for the D-RTK GNSS.
  
2. Added support for the A3 Pro.
  
3.  Added support for the IOSD MARK II.
  
4.  Optimized flight control for different payloads.
  
5.  Reduced the issue of sudden drops in aircraft altitude.
  
6.  Optimized Intelligent Flight Modes, including Waypoints and POI, and gimbal control.
  
  
Notes
  
1.  Ensure the Lightbridge 2 Air System and Ground System have the latest version firmware.
  
2.  Be sure to use the latest version of DJI Assistant 2 to configure the A3.
  
3.  A3 flight control settings will be reset after firmware upgrade. Remember to reconfigure the settings.
  
4.  When using the A3 Pro, be sure to upgrade all the modules, i.e. the IMU Pro, flight controller, etc.
  
5.  Be sure to upgrade the IOSD MARK II firmware before use.

For more details, please visit our official website: http://www.dji.com/product/a3/info#downloads

2016-6-13
Use props
Hanski
lvl.2
Flight distance : 53619 ft
Finland
Offline

Can all the Pro version GPS/IMU's used together with D-RTK GNSS (totally 5 GPS antennas)?
2016-6-19
Use props
DJI-Adela
DJI team

Hong Kong
Offline

Hanski Posted at 2016-6-20 04:44
Can all the Pro version GPS/IMU's used together with D-RTK GNSS (totally 5 GPS antennas)?

Thanks for your concern.
Presently, the D-RTK GNSS is only supported by the A3/A3 Pro system. For any more details about A3/A3 Pro, please visit: http://www.dji.com/product/a3/info#specs
2016-6-20
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules