Oleksiy
lvl.3
Switzerland
Offline
|
For some reason, the Storage mode of my DJI charging hub does not seem to work. Due to the weather I did not use yesterday two batteries (P4Pro+), and I want to discharge them from 100% to 50%. And also one more battery from 75% to 50%.
The hub has been switched on for several hours, but even one battery did not discharge yet from 75% to 50%. Charging via hub works fine, but discharging does not work in my case. What can I try?
I use discharging with my other quads and another charging station, and usually discahrging takes about an hour or less. Something is not right. I was so glad when I saw the Storage mode on the DJI charging hub, but it turned out that it does not work for discharging.
I ask the DJI engineers to have a look at this issue and if possible to fix it with a firmware update.
Update: After about 4 hours one battery has got the constnt blue color, so it was discharged from 75% to about 50%. Now two other batteries has got blinking blue light. So basically it works, but it takes too much time.
|
|