I updated my I1 to newest firmware and My status LED on the camera went to a dim green and now the camera will not rotate and flashes red after a while.

Remove the firmware bin file from your SD card, then this "issue" will go.

airymok Posted at 2016-6-19 21:16
Remove the firmware bin file from your SD card, then this "issue" will go.

I removed the bin and red light went away and everything looks ready The DJI go app shows everything is good . accept my status light on the camera does not turn on green, when i take a picture it will flash green then when I record the light blinks red, but before the update it would stay on green now its a real dim green light.  after the update it was green for a few minutes then it turned off and never came on again.