Hello,  isn't possible use the intelligent fly features if the p4 fly at negative height relative to home point. For example: if you are on the top of the hill is not possible to use the tracking or point of interesting features near to sea level to film a boat. This is a big limit.

Do you have a suggestion?

Regards

Hello buxdronex, in this situation, it would be better to choose an appropriate takeoff point. For safety, please keep a safe altitude when you use the intelligent flight functions.

Unfortunately the intelligent flight modes that require minimum altitude requirements do not accept negative integer to activate these functions. You would have to start the motors at the bottom of the hill, then make your way to the top of the hill if you wish.

DJI-Jamie Posted at 2016-6-24 13:44
Unfortunately the intelligent flight modes that require minimum altitude requirements do not accept  ...

Alternatively, would resetting the Home Point work in this case?

Airspace Explor Posted at 2016-6-25 05:20
Alternatively, would resetting the Home Point work in this case?

You can try to land at a lower level, disarm the motors then it will record that as a home point but I'm not sure if it will work then. Try and see if it does, but remember you created a new home point so it's going to go there in a RTH.

Airspace Explor Posted at 2016-6-25 05:20
Alternatively, would resetting the Home Point work in this case?

If you use Ken's advice, you could reset the home point manually by using the Aircraft Home Point option in the MC Settings section of the GO app.