DroneToTheMAX
lvl.2
United States
Offline
|
Here are my suggestions for you, DJI.
1. DO NOT HAVE AN OPTION IN DJI GO WHERE YOU CAN DISABLE CSC! This can be dangerous to people or property, there has to be a way to shut down 4 spinning knives in case of an emergency!
2. Put warnings all over the place about CSC! Even if you don't read the instruction manual and just boot up the aircraft and connect your device to the controller, before you can enter the camera mode, there should be a screen lasting for about 10 seconds warning pilots about CSC, so they HAVE to know about it before they fly.
3. My suggestion for a different CSC on the controller now would be: Press the Power button and the RTH button simultaneously to power off the motors.
4. A dedicated CSC feature: On the controller, there should be a red button with a plastic lid on top that says, "EMERGENCY MOTOR SHUTOFF". That would be the fastest and safest way to shut off the motors. If you pressed it and your aircraft crashed, you would have no one to blame but yourself.
5. A On-Screen Motor Shutoff button: Just like the Landing and ReturnToHome buttons on the screen, there should be a button that shuts off the motors. When pressed, it should warn you what it is about to do and you have to slide your finger across the screen just like landing or RTH for the motors to shut off. |
|