Following an earlier thread regarding issues with the video feed going to the iOS device, pleas see below the video of the issue. In summary, I have flown the Inspire 1 4 times in total and EVERY time this issue has come up. As you will see in the video, the gimbal is assembeled correctly and everything on the unit seems to be ok, but the video feed to the iOS device is either intermitent or simply does not appear.
On the second part of the video, I reattach the gimbal and start the Inspire with good video feed, but after about 30 seconds in flight, the screen turns blue, then black, then all video recording stops.
Need you help please on this matter. Can you please assist?
Look through the whole thing or jump to 4:45 for the recurring issue.
Here is the link to the video:
I am planning a trip to the Maldives in 2 weeks and would like to have this solved beforehand.
Are you using the Auto channel feature or custom ch number?
I had the same situation in Auto CH. /Samsung Galaxi S8.4, app 1.0.2 and .16(inspire) pd. wifi was enable.
My counteraction was select the Ch14,
Ps. using Ipad 0.9.2 works as intended, just notice an small jump in my first video rec.4K (using the original micro sd card) counteraction :format twice , no more issues.
For as long as I've RC'd anything, it's always been Tx on first.
Even w the inspire 1.
My sequence is Tx, App then Bird.
Not sure if this will help your issue, but it may help avoid one in the future.
Posted this the other day and remember reading this via one of Ed's posts in the past. Auto seems to pick a channel amongst those that are unstable have no idea why. I manually pick a clean channel in a stable area .
No more Auto I will pick a stable channel every time I fly and add this to my pre flight check list