Please select Into the mobile phone version | Continue to access the computer ver.
1.9.1.30 Firmware for Inspire 1 Series
123Next >
12886 119 2016-7-7
Uploading and Loding Picture ...(0/1)
o(^-^)o
DJI-Paladin
DJI team
Flight distance : 2408 ft

Hong Kong
Offline

Overview:
1. All-in-One firmware version updated to v1.9.1.30.

2. DJI GO app iOS version updated to v2.8.4.

3. DJI GO app Android version updated to v2.8.2.

What’s New:


1. Fixed issue of temporary Vision Positioning System sensor error on rare occasions for some aircrafts.

Notes:


Aircraft version v1.9.1.30 and camera version v1.8.1.00 should be displayed in DJI GO. The version will only display correctly in DJI GO after connecting to the Internet when upgrade is complete.

The firmware can only be downgraded to v1.8.1.00 or later.







2016-7-7
Use props
Henry Mo-Yung
First Officer
Flight distance : 10094199 ft
  • >>>
Hong Kong
Offline

Thank you, Paladin for this notice.

And thank for the swift response DJI R&D Team took in the past 2 weeks diagnosing the issues and working out the solution.

Henry
2016-7-7
Use props
Wolfman
Second Officer
Flight distance : 405659 ft
Australia
Offline

The first person to test this one gets a prize!
2016-7-7
Use props
Wieg1
lvl.3

Italy
Offline

Many thanks to DJI Team.
2016-7-7
Use props
Rob W
Captain
Flight distance : 94390 ft
  • >>>
Sweden
Offline

Thank's, DJI! My aircraft have been grounded for the previous firmware (and also because of bad weather). I just flashed the new firmware and it seems to went well. Hope the weather now clears up!

[00008602][17 00][00] v1.1.0.6 -> v1.1.0.8 need upgrade.
.....
[00065246][17 00][05] v1.1.0.8 -> v1.1.0.8
....
[00065484]Packet upgrade finish successfully.
2016-7-7
Use props
Henry Mo-Yung
First Officer
Flight distance : 10094199 ft
  • >>>
Hong Kong
Offline

Hi Paladin,

It seems the Aircraft Version and the Camera Version shown in the Inspire 1 Pro Release Notes are wrongly printed.

It printed:-
Camera version v1.9.1.30 and aircraft version v1.9.1.10  should be displayed in DJI GO .

In my DJI GO app, it shows:-

Inspire 1 Pro upgraded with Internal FW v1.09.01.21

Inspire 1 Pro upgraded with Internal FW v1.09.01.21
2016-7-7
Use props
Henry Mo-Yung
First Officer
Flight distance : 10094199 ft
  • >>>
Hong Kong
Offline

Henry Mo-Yung Posted at 2016-7-7 21:17
Hi Paladin,

It seems the Aircraft Version and the Camera Version shown in the Inspire 1 Pro Release ...

Dear Paladin,

Here are the relevant extracts of the two log files:-

Upgraded with Internal FW v1.09.01.21 on 1 Jul 2016
[00006672]========== remo-con disconnect. boot(15) ============
[00006734]Packet [C:\WM610_FC550_FW_V01.09.01.21.bin] detected, card sn [0x919c2a2b].
[00006807]Packet upgrade start...

[00006869]Packet checking...
[00006937]Packet vlink 01.09.0121 <-> 01.08.0256.
[00007008]Record vlink 01.09.0110 <-> 01.08.0100 (flow = 0).
[00007163]Done.

[00007224]Version checking[1]...
......
[00009151][17 00][00] v1.1.0.6 -> v1.1.0.8 need upgrade.
......
[00009417]Done.

[00011498]Waiting for user confirm...
[00021564]Timeout, start upgrade automatically.

[00021687]Firmware upgrading[1]...
[00021767][17 00] Firmware upgrade start...
[00063206][17 00] Firmware upgrade finished successfully.
[00063267]Done.

[00063336]Version checking[2]...
......
[00066170][17 00][05] v1.1.0.8 -> v1.1.0.8
.......
[00066550]Packet upgrade finish successfully.


Tried upgrading with FW v1.09.01.30 on 7 Jul 2016
[00006672]========== remo-con disconnect. boot(15) ============
[00006738]Packet [C:\WM610_FC550_FW_V01.09.01.30.bin] detected, card sn [0x919c2a2b].
[00006810]Packet upgrade start...

[00006886]Packet checking...
[00006948]Packet vlink 01.09.0130 <-> 01.08.0100.
[00007018]Record vlink 01.09.0121 <-> 01.08.0256 (flow = 0).
[00007088]Done.

[00007166]Version checking[1]...
......
[00009206][17 00][00] v1.1.0.8 -> v1.1.0.8
......
[00011488]Packet upgrade cancelled at version checking.


Grateful if you would confirm with DJI R&D colleagues that for my case no further upgrading is needed.

Thanks.

Henry
2016-7-7
Use props
shk747
lvl.1

Austria
Offline

mine shows after several "upgrades" 1.9.1.10+, 2.8.4 deleted / rebooted / reinstalled still same !

sure connected to the inet ;-)


p.s. tryed another ios device, same result ;-(
2016-7-7
Use props
job-h20-stegano
Second Officer
Flight distance : 462480 ft
United Kingdom
Offline

Same here shk747, also shows 1.9.1.10+
On Android, latest version 2.8.2

Redownloaded update and inserted it, booted it up, turned it off. Looked at the log, it said firmware already up to date. So I assume it is updated to 1.9.1.30, I was also able to see the small update in the hidden log file which showed that the VPS received a small update.

But why does it not say 1.9.1.30 as aircraft version in the app?

2016-7-7
Use props
Rob W
Captain
Flight distance : 94390 ft
  • >>>
Sweden
Offline

Hmmm... I've updated to 1.9.1.30 successfully, and I get:

Normal (latest firmware)
Aircraft: 1.9.1.10+  (note the +)
Camera: 1.9.1.10

I'm connected to the Internet.
2016-7-7
Use props
Nigpd
Second Officer
Flight distance : 597677 ft
United Kingdom
Offline

Hmmmmm, here we go again
2016-7-7
Use props
GabeZ
lvl.4
Flight distance : 768448 ft
Offline

I'm wonder if this is exactly the same as the internal firmware.  I'm running the internal firmware and also see 1.9.1.10+.  I know it will take this update because I'd be going from 1.9.1.21 to 1.9.1.30.
2016-7-7
Use props
nilsblix
First Officer
Flight distance : 11970394 ft
  • >>>
Norway
Offline

Rob W Posted at 2016-7-7 16:42
Hmmm... I've updated to 1.9.1.30 successfully, and I get:

Normal (latest firmware)

Probably something with the DJI servers makes it display 1.9.1.10 +
It happens from time to time on newly updated FW. No need to upgrade again if your .txt file says success. Just fly and eventually the + sign will disappear and display 1.9.1.30
2016-7-7
Use props
nivong
lvl.4
Flight distance : 2267251 ft
  • >>>
Netherlands
Offline

guys its normal it will update within 24 hours. give the slow chinees servers some rest
2016-7-7
Use props
DJI-Jamie
DJI team
Flight distance : 112405 ft
United States
Offline

Henry Mo-Yung Posted at 2016-7-7 21:17
Hi Paladin,

It seems the Aircraft Version and the Camera Version shown in the Inspire 1 Pro Release ...

The release notes for the Inspire 1 Pro and Raw appear to have the correct camera firmware version indicated:

https://dl.djicdn.com/downloads/ ... Notes_en_160707.pdf

https://dl.djicdn.com/downloads/ ... Notes_en_160707.pdf

If you're referring to Paladin's post, he's referring to the Inspire 1 with the X3 camera. If you have the Inspire 1 Pro, then you appear to be fine.
2016-7-7
Use props
Henry Mo-Yung
First Officer
Flight distance : 10094199 ft
  • >>>
Hong Kong
Offline

DJI-Jamie Posted at 2016-7-8 05:55
The release notes for the Inspire 1 Pro and Raw appear to have the correct camera firmware version ...

Dear Jamie,

But for my Inspire 1 Pro, it shows Aircraft Version V1.9.1.30 in DJI GO, whilst the Release Notes state aircraft version v1.9.1.10 should be displayed after the upgrade.

Is there something wrong?

Henry
2016-7-7
Use props
DJI-Jamie
DJI team
Flight distance : 112405 ft
United States
Offline

Henry Mo-Yung Posted at 2016-7-8 06:09
Dear Jamie,

But for my Inspire 1 Pro, it shows Aircraft Version V1.9.1.30 in DJI GO, whilst the Re ...

Perhaps a bit of dyslexia on behalf of those writing the release notes. We should have this rectified soon.
2016-7-7
Use props
Henry Mo-Yung
First Officer
Flight distance : 10094199 ft
  • >>>
Hong Kong
Offline

DJI-Jamie Posted at 2016-7-8 06:13
Perhaps a bit of dyslexia on behalf of those writing the release notes.  We should have th ...

Hi Jamie,

Thanks for confirming this.

Henry
2016-7-7
Use props
GabeZ
lvl.4
Flight distance : 768448 ft
United States
Offline

I just tried updating internal firmware 1.9.1.21 to 1.9.1.30 and it aborts.  It seems it's exactly the same firmware if I'm correct.
2016-7-7
Use props
DJI-Paladin
DJI team
Flight distance : 2408 ft

Hong Kong
Offline

Henry Mo-Yung Posted at 2016-7-7 21:27
Dear Paladin,

Here are the relevant extracts of the two log files:-

The Log is OK.
2016-7-7
Use props
LICENSED PILOT
First Officer
Flight distance : 644833 ft
Offline

nivong Posted at 2016-7-8 05:30
guys its normal it will update within 24 hours. give the slow chinees servers some rest

Another chinese fire drill...
2016-7-7
Use props
RichJ53
Captain
Flight distance : 1687582 ft
  • >>>
United States
Offline

Thank you paladin and the DJI team

Rich
2016-7-7
Use props
Cabralkev
Second Officer
Flight distance : 1997861 ft
Canada
Offline

Is it worth updating? I've been hearing reports of battery failure with this firmware. Hopefully this is false information.
2016-7-7
Use props
Rob W
Captain
Flight distance : 94390 ft
  • >>>
Sweden
Offline

nilsblix@gmail. Posted at 2016-7-7 23:27
Probably something with the DJI servers makes it display 1.9.1.10 +
It happens from time to time  ...

Yes, guess it's the servers again, thank's!
2016-7-7
Use props
RichJ53
Captain
Flight distance : 1687582 ft
  • >>>
United States
Offline

Henry Mo-Yung Posted at 2016-7-7 06:27
Dear Paladin,

Here are the relevant extracts of the two log files:-

Henry

You need to downgrade your internal FW to 1.8 first. Then you can upgrade to the new FW 1.9.1.30  (you know why I know this )

That's why you are having trouble

Rich
2016-7-7
Use props
db050800
First Officer
Flight distance : 2204462 ft
  • >>>
United Kingdom
Offline

Wolfman Posted at 2016-7-7 11:56
The first person to test this one gets a prize!

I dont want the prize :0
2016-7-7
Use props
DJI-Paladin
DJI team
Flight distance : 2408 ft

Hong Kong
Offline

nilsblix@gmail. Posted at 2016-7-8 05:27
Probably something with the DJI servers makes it display 1.9.1.10 +
It happens from time to time  ...

The + doesn't influence normal operation of the drone. We are working on it. Thanks for your patience and understanding.
2016-7-7
Use props
OO-RAISER
lvl.2
Flight distance : 118323 ft

Singapore
Offline

Seems DJI are listening to us and doing something
2016-7-8
Use props
Henry Mo-Yung
First Officer
Flight distance : 10094199 ft
  • >>>
Hong Kong
Offline


Thank you for confirming this, Paladin.

Henry
2016-7-8
Use props
Henry Mo-Yung
First Officer
Flight distance : 10094199 ft
  • >>>
Hong Kong
Offline

RichJ53 Posted at 2016-7-8 12:37
Henry

You need to downgrade your internal FW to 1.8 first. Then you can upgrade to the new FW 1.9 ...

Dear Rich,

Despite of the uncertainties in the upgrade process, I received positive confirmation email from DJI R&D Support;-

[Quote]

Hi Henry,

Your Inspire 1 has been upgraded successfully.​

Aircraft version should be 1.9.1.30 and camera version should be 1.9.1.10.

Inspire 1 Pro and Inspire 1 Raw release notes will be revised as soon as possible, thank your for pointing that out and sorry for the inconvenience.

H...... (of DJI)

--------------------------------------------------------------------------------------------------

Dear H...... (of DJI),

I notice that DJI on today officially announced FW v1.09.01.30 for the Inspire 1 Pro.

Before trying to upgrade, I found out from the About page in DJI GO App the Aircraft version was already showing Version 1.9.1.30 and Camera Version Version 1.9.1.10, which are different from the versions announced in the Inspire 1 Pro Release Notes, which stated "Camera version v1.9.1.30 and aircraft version v1.9.1.10  should be displayed in DJI GO”.

I tried to upgrade but the log file showed the following result:-

[00006672]========== remo-con disconnect. boot(15) ============
[00006738]Packet [C:\WM610_FC550_FW_V01.09.01.30.bin] detected, card sn [0x919c2a2b].
[00006810]Packet upgrade start...

[00006886]Packet checking...
[00006948]Packet vlink 01.09.0130 <-> 01.08.0100.
[00007018]Record vlink 01.09.0121 <-> 01.08.0256 (flow = 0).
[00007088]Done.

[00007166]Version checking[1]...
[00007484][08 00][00] v2.14.9.42 -> v2.14.9.42
[00007549][01 00][00] v1.27.5134 -> v1.27.5134
[00007619][01 01][00] v1.27.5134 -> v1.27.5134
[00007692][01 04][00] v0.5.5085 -> v0.5.5085
[00007845][03 05][00] v34.1.0.5 -> v34.1.0.5
[00007966][03 06][00] v2.4.20.18 -> v2.4.20.18
[00008083][04 00][00] v1.29.0.92 -> v1.29.0.92
[00008205][05 00][00] v3.0.6.2 -> v3.0.6.2
[00008280][09 00][00] v3.0.0.4 -> v3.0.0.4
[00008406][11 00][00] v3.9.0.0 -> v3.9.0.0
[00008526][12 00][00] v1.11.0.0 -> v1.11.0.0
[00008646][12 01][00] v1.11.0.0 -> v1.11.0.0
[00008766][12 02][00] v1.11.0.0 -> v1.11.0.0
[00008886][12 03][00] v1.11.0.0 -> v1.11.0.0
[00009101][15 00][00] v1.1.2.0 -> v1.1.2.0
[00009206][17 00][00] v1.1.0.8 -> v1.1.0.8
[00009326][17 01][00] v2.0.1.6 -> v2.0.1.6
[00009421][19 00][00] v1.0.8.96 -> v1.0.8.96
[00011488]Packet upgrade cancelled at version checking.

Would you confirm me that for my case no further upgrading is needed, please?

Thank you in advance.

Henry


[Unquote]

I think I will just fly it as-is.

Thank you.

Henry
2016-7-8
Use props
nilsblix
First Officer
Flight distance : 11970394 ft
  • >>>
Norway
Offline

Have upgraded from 1.9.01.21 to 1.9.01.30 today - the upgrade went well (had to downgrade to 1.8 first but that was expected.)

I also swapped a CW motor that was running tight and hot - after swapping I had to upgrade again (probably to upgrade that motors esc)

Hope to get out flying this afternoon
2016-7-8
Use props
waxahachie tim
lvl.2
Flight distance : 47169 ft
United States
Offline

Please help, My Inspire 1 is not seeing the 1.9.01.21 update. my iPad did update to 2.8.4. The controller is at 1.6 and the aircraft is at 1.8.1.00. The aircraft is ignoring the update file as is the remote. Ive tried with the controller off and on and on two different micro cards. Updates have never gone smoothy, but they always initiate.

Ideas anyone?
PS- there is no text file on the card
2016-7-8
Use props
nilsblix
First Officer
Flight distance : 11970394 ft
  • >>>
Norway
Offline

nilsblix@gmail. Posted at 2016-7-8 17:57
Have upgraded from 1.9.01.21 to 1.9.01.30 today - the upgrade went well (had to downgrade to 1.8 fir ...

UPDATE

Out flying - no issues - promising

2016-7-8
Use props
AEROKAMERA
Second Officer
Flight distance : 1053301 ft
  • >>>
Poland
Offline

Today I flew out my 6 batts on last FW and GoApp, everything looks ok except old issues: camera hangs up and main controller data error-data recorder errors, on monday my I1P goes to support.
PS. Corrercted Inspire_1_Pro_Product_Release_Notes_en_160708 released
IMG_0263.PNG
2016-7-8
Use props
GabeZ
lvl.4
Flight distance : 768448 ft
United States
Offline

RichJ53 Posted at 2016-7-7 21:37
Henry

You need to downgrade your internal FW to 1.8 first. Then you can upgrade to the new FW 1.9 ...

Doh......I was hoping both versions were the same. I was trying to justify not downgrading and re-upgrading.  Looks like I need to do the SD card dance again
2016-7-8
Use props
Andy.Deveney
lvl.2
Flight distance : 640200 ft
United States
Offline

Greetings,
    Updated with success this morning here in Southern California. After an IMU calibration, it flew great. no issues flying 5 batteries in a 2-hour period.
2016-7-8
Use props
waxahachie tim
lvl.2
Flight distance : 47169 ft
United States
Offline

I solved my problem. I redownloaded the file from the dpi site and everything is going well.
2016-7-8
Use props
Henry Mo-Yung
First Officer
Flight distance : 10094199 ft
  • >>>
Hong Kong
Offline

GabeZ Posted at 2016-7-9 04:54
Doh......I was hoping both versions were the same. I was trying to justify not downgrading and re- ...

Dear GabeZ,

DJI R&D staff replied me by email confirmed that my Inspire 1 Pro had been upgraded successfully - implying that the codes in both FW v1.9.1.21 and FW v1.9.1.30 are identical. My Inspire 1 Pro was showing version 1.9.1.30 in DJI GO App although it was only upgraded with the "Internal Firmware" v1.9.1.21.

You don't need to downgrade and upgrade if your aircraft is showing FW v1.9.1.30.

Henry
2016-7-8
Use props
RichJ53
Captain
Flight distance : 1687582 ft
  • >>>
United States
Offline

GabeZ Posted at 2016-7-8 13:54
Doh......I was hoping both versions were the same. I was trying to justify not downgrading and re- ...


Sorry for the confusion, per Henry Mo-Yung you do not need to downgrade. Please disregard what I posted and see Henry's information above.
(I did not know that .21 and .30 were the same)

I did not know this information at the time I was changing my Inspire 1 V2 X3.

All good

Rich
2016-7-8
Use props
FictitiousPerso
Second Officer

United Kingdom
Offline

Updated DJI App inspire 1 + 3 Batterys this morning as normal not a single glitch. upgrade took about 2 minutes with each battery
2016-7-9
Use props
123Next >
Advanced
You need to log in before you can reply Login | Register now

Credit Rules