stuart.dartrite
lvl.1
Flight distance : 654498 ft
United Kingdom
Offline
|
Hi
I noticed this issue on our Z15 (with NEX5) fitted to an S900. No hard landings by us (but aircraft and gimbal were second-hand).
Immediately after panning and with hands off the gimabal controller sticks, the gimbal rolls slightly - a few degrees, I 'd say. Gimbal does this after every pan, so the roll is cumulative.
When I reverse the pan direction it does not seem to revese the roll by the same amount.
I have a taken a video https://goo.gl/photos/NHoyACWAThoX1L8B6 - the link is to a Google shared folder, so I hope it works.
The first few seconds of the video are setting up the gimbal so you can line the it up against the background for a reference.
I guess either the IMU or the GCU need a calibration.
I have now fittted a newer gimbal for the same camera and it performs perfectly, so I am pretty certain it is a gimbal issue.
Any suggestions what to do?
Thanks
Stuart
|
|