purduein98
lvl.1
Flight distance : 103999 ft
United States
Offline
|
champflyer Posted at 2016-12-24 05:03
So i also had a similar issue. My controller would not power on, with the power button. Non of the lights would come on when plugged into charger either. So i put the controller back in the case and proceeded to get in touch with DJI. So here is where it gets weird. So i got the controller back out later to get the serial number, at that point i noticed that it was warm to the left of the power button. i suspected that the battery was heating up. I checked my iPhone to see if the wifi was being generated by the controller. (it was) so i turned on the drone and the camera was working but could not control the gimbal. It was telling me Lost RC signal. so i shut down the drone, but could not power off the controller (which still had no lights on ) I set the controller aside for the night, in the morning the controller was cool.I checked to see if the wifi was being generated, ( it wasn't) i then plugged in the charger to the controller and it then started charging normally. after charging for an hour, i unplugged it and tried the power button. It worked normally, i powered up the drone, opened the DJI go app, and all appears to work normally. I have not test flown yet because its raining. I post test flight results when i can.
I'm having the same exact issue. I'll let the controller sit overnight to see what happens. Just curious, had there been some time since you had last flown and the RC issue! I probably haven't flown for 3 weeks and when I went to turn the RC on, no lights. |
|