Hello,

I need some help, my Inspite needed the updates, so I have 2 problems

1-. After I updated the remote controller, I reboot it and went and power up the aircraft to switch it to landing mode, but now the remote controller is connected to the aircraft but wont respond to the command to switch to landing mode.
2- The second problem, for some reason now my sd card when I plug it to the computer I only get read mode only, so I can't put the update file in, and still the aircraft in travel mode.

Any advice will be great,
Thanks in advance

Did you update the aircraft before the remote?  If you didn't, then that's the cause of problem #1

downgrade the remote and them put the inspire into normal mode, connect the camera. Update the Inspire only first .... then redo the remote


Phantom as Inspire






#2 format the SD card in the Inspire 1 using the GO App....  this should be fine. If not the SD chip has a read only lock on it.  

Rich

RichJ53 Posted at 2016-7-13 00:04
downgrade the remote and them put the inspire into normal mode, connect the camera. Update the Inspi ...

Thanks for all the videos, I'm going to try!!

Alastair Posted at 2016-7-12 20:34
Did you update the aircraft before the remote?  If you didn't, then that's the cause of problem #1

Thanks! I did it the remote first, but already downgraded it and started with the aircraft and works perfect

Always update the aircraft first, even if the RC says it needs updating, make sure to update the aircraft first always.
Make sure you dont have the SD card or adapter "Locked " this will cause it not to be overwritten as well .

Glad you have it sorted.  



donnie

SAFAERIALS Posted at 2016-7-13 08:11
Thanks! I did it the remote first, but already downgraded it and started with the aircraft and wor ...

Good job and I am pleased you were able to update and everything works!  

Rich

SAFAERIALS Posted at 2016-7-13 23:11
Thanks! I did it the remote first, but already downgraded it and started with the aircraft and wor ...

Good to hear you got yourself up and running.