[size=14.6667px]i have 2 p3p. my main p3p has the latest fw. my backup has 126 fw and no camera!
[size=14.6667px]the main p3p has come up with esc error, i believe it is front left motor. have ordered a set of four motors to replace them all. so meanwhile i took the camera off of the main p3p which has the latest fw and installed it on the backup p3p which has fw 126. it flies just fine with rc 158 and dji go app 283. in the "about" tab it does show the versions i just mentioned.
[size=14.6667px]now, here is the problem: i went to update the fw from 126 to 140 but the log file says failed as the fw is older or same as existing fw. this obviously is not true as it has 126!!! i have tried 132, 140,160, and even the latest fw but they all give the same result.
[size=14.6667px]i am wondering if the camera that came from my main p3p which had the latest fw 196 is the cause of not being able to update fw on backup p3p with 126 fw???
[size=14.6667px]any ideas would be appreciated.

Hello rayrokni, since your gimbal and camera are running the latest firmware, you can only use the latest firmware to try again.

DJI-Paladin Posted at 2016-7-19 15:13
Hello rayrokni, since your gimbal and camera are running the latest firmware, you can only use the l ...

Thanks for the reply..That it's what I thought but the ac shows fw 126 in the go app. Is there a problem to fly out with camera at latest fw and the AC at 126.
Thank you

rayrokni Posted at 2016-7-19 21:45
Thanks for the reply..That it's what I thought but the ac shows fw 126 in the go app. Is there a p ...

It is recommended to keep it up to date to ensure the best user experience.