Working Wonders
lvl.1
Flight distance : 57844 ft
United Kingdom
Offline
|
I flew today for the first time since upgrading to 1.9.1.30. (I skipped the previous firmware and went straight from 1.8.1.00 because I hadn't been able to fly and because of the reported problems.)
When I tried to tilt the camera downwards from horizontal with the scroll wheel the camera went up and stopped. When I pulled on the wheel a bit further the camera went down.
With the camera at its maximum upward angle, pulling the wheel to bring it down caused a small movement before stopping. Pulling again but slightly further made it go down. It's all very unpredictable. The only thing that seems to work is tilting up from -90degs to +30.
I have changed the gimbal wheel speed setting a couple of times but it makes no difference. I thought it might have been the addition of an ND8 filter for the first time but when I took it off and reverted to the balancing ring it still didn't behave normally. I am using the stock DJI 15mm lens and have had no probelms before. After the firmware upgrade I calibrated the IMU, the compass and the sticks.
Any thoughts would be appreciated. Thanks.
|
|