My Dji P3 standart was destroyed. I bought new  the motherboard.
I can not connect via WiFi to the aircraft. It just flashes a yellow light rapidly back lights. .
What to do?

Hello esa-tapani, have you double checked the wires and connectors on the mainboard as well as the camera?

DJI-Paladin Posted at 2016-7-25 06:02
Hello esa-tapani, have you double checked the wires and connectors on the mainboard as well as the c ...

Yes I am. Cable submitted to the system board.
When you turn on the power of the aircraft, the camera does not react at all. whether it is possible that the cable is defective.

esa-tapani Posted at 2016-7-25 18:41
Yes I am. Cable submitted to the system board.
When you turn on the power of the aircraft, the cam ...

Make sure the cable above the gimbal is in good status.

esa-tapani Posted at 2016-7-25 13:41
Yes I am. Cable submitted to the system board.
When you turn on the power of the aircraft, the cam ...

Hello!
Thanks for the advice. When once I checked the cables and connectors. I found that the camera connector was a small piece of plastic. This prevented from entering the connector sufficiently deep.
Now P3S fly again.
Thank you and all the best for you!

esa-tapani Posted at 2016-7-25 20:43
Hello!
Thanks for the advice. When once I checked the cables and connectors. I found that the came ...

Glad to hear that the problem has been solved.Happy flying