Please select Into the mobile phone version | Continue to access the computer ver.
Firmware update of Phantom4 using DJI Assistant 2
1188 3 2016-7-26
Uploading and Loding Picture ...(0/1)
o(^-^)o
kperison
lvl.1
Canada
Offline

Hello,

I am trying to update the firmware in my Phantom 4 using the DJI Assitant 2 program. However each time I link the bird with thPC and launch the program. The firmaware list fails to display.

I have used the "Factory Reset" button all ready and powered down the bird and restarted it and the program only to get the same results.
Has any one else experienced this? or know if this is a new issue and how to resolve.

Regards & Thanks for any assistance

Kelly

DJI Assistant2 Firmware ListE rror.png
2016-7-26
Use props
DJI-Paladin
Administrator
Flight distance : 2408 ft
Hong Kong
Offline

Hello Kelly, have you tried to reinstall the DJI Assistant 2 software? Make sure the driver has been installed correctly in your computer.
2016-7-26
Use props
DJI-H.C
Administrator
Flight distance : 13602 ft
Offline

Strange. Can you update through DJI GO app?
2016-7-27
Use props
rodger
First Officer
Flight distance : 20145135 ft
  • >>>
United States
Offline

Give this a shot. Leave the P4 off and have you PC running and connected to the P4. When the USB connect tab appears power up the P4.
2016-7-27
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules