Can you use an Inspire 1 remote as a Slave for the Mat-600?

The Inspire 1 RC would not work with the M600. You would need to use another Lightbridge 2 Ground Unit as the Slave RC.

DJI-Jamie Posted at 2016-7-27 18:20
The Inspire 1 RC would not work with the M600. You would need to use another Lightbridge 2 Ground Un ...

Thanks Jamie. So what's the best way to go about getting seperate camera gimbal control? And video.

SkyPod.nyc Posted at 2016-7-28 19:59
Thanks Jamie. So what's the best way to go about getting seperate camera gimbal control? And video. ...

After looking at the Ground unit more closely, I understand your answer. But Can that LB2 Ground Controler operate my Ronin MX Gimbal?

SkyPod.nyc Posted at 2016-7-29 08:11
After looking at the Ground unit more closely, I understand your answer. But Can that LB2 Ground C ...

Yes it can when the second Ground Unit is set as the slave RC.

SkyPod.nyc Posted at 2016-7-29 02:11
After looking at the Ground unit more closely, I understand your answer. But Can that LB2 Ground C ...

spend a few bucks more and get NOT only the LB2 Remote...order the complete LB2 Set (Ground and air unit). So you will also have a pro Setup if using the Ronin MX without your M600...thats what i did...

DJI-Jamie Posted at 2016-7-29 11:00
Yes it can when the second Ground Unit is set as the slave RC.

Thanks. Just ordered one!
-john

SkyPod.nyc Posted at 2016-7-31 08:06
Thanks. Just ordered one!
-john

Good to hear. Happy flying!

DJI-Jamie Posted at 2016-7-31 09:53
Good to hear. Happy flying!

I have two M600's, and I am trying to pair a second controller to one of them for a shoot. Is it possible to use the other aircraft's controller and make that one the slave?

I have tried to do this and it is not working at all. Is there a firmware update the controller needs??

innsaei Posted at 2016-10-6 01:24
I have two M600's, and I am trying to pair a second controller to one of them for a shoot. Is it p ...

They should pair up similarly to the Inspire, you just need to ensure that you select "request control" when you're setting up the slave. Have you tried that? Having matching, updated firmware on both RCs is preferred.

DJI-Jamie Posted at 2016-10-6 01:33
They should pair up similarly to the Inspire, you just need to ensure that you select "request cont ...

Firmware mismatch, updating and rechecking.

innsaei Posted at 2016-10-6 01:34
Firmware mismatch, updating and rechecking.

Yep, all good now!!!!

innsaei Posted at 2016-10-6 02:15
Yep, all good now!!!!

Great! Thanks for the update.

DJI-Jamie Posted at 2016-10-6 02:45
Great! Thanks for the update.

Even with EXT turned off, we're still getting a lot of connectivity issues using the 2 M600 Controller setup.
Master controller does not show M600 when DJI Go App is opened; just shows Lightbridge 2.
Is this related to the SRW-60G? Is there any recommendation to get connectivity? Would replacing one of the M600 controllers with a Lightbridge 2 ground units work better?

innsaei Posted at 2016-10-18 02:01
Even with EXT turned off, we're still getting a lot of connectivity issues using the 2 M600 Contro ...

The SRW60 wouldn't cause the M600 not appear in the Go app. Could you happen to clarify what mobile device you're using? Does the M600 connect to the Assistant 2 Software without issue?

We are having problems with our slave remote on our M600 Pro. The video transmission is all pixelated and cuts in and out while the video in the master is strong and clear. Any suggestions??

Hello I going to place a X5 on a M600, What Slave Remote can I use, Does the Controller from  the Inspire1 can be a slave to the M600 Controller?

Hello I going to place a X5 on a M600, What Slave Remote can I use, Does the Controller from  the Inspire1 can be a slave to the M600 Controller?

fans4278f4f6 Posted at 2018-3-15 13:28
Hello I going to place a X5 on a M600, What Slave Remote can I use, Does the Controller from  the Inspire1 can be a slave to the M600 Controller?

I'm curious about this too. Do I have to get another LB2 controller and hardware attachment for the 600 pro?