Let me start by listing the equipment I am using: M600, Ronin-MX, Red Epic Dragon, SRW-60G and A3 with 2 upgrade kits.

I am having in issue with the secondary remote control when attempting to control the ronin-mx gimbal with a Red Epic attached. The secondary lightbridge 2 RC has been slaved and accept the binding but is still unable to move the gimbal. The C1 function can reset the gimbal yaw with both main M600 controller and secondary lightbridge 2 RC. I also have control using the touch display slide. The Main RC for M600 is able to control the gimbal using the tilt wheel.
Am I missing a setting to enable secondary RC to become the main camera support? I've been at this for days now, after reading through manuals and forums I cannot find the answer.

I should also state I was able to hook the X5R up with no problems after reading about the EXT setting for the App output.

To clarify, do you have any end points set on your Ronin MX? Do you have Smooth Track enabled or disabled?

Endpoints are set to default. Smooth Track is enabled.

Rtyung8186 Posted at 2016-8-5 05:55
Endpoints are set to default. Smooth Track is enabled.

Because the default endpoints are 0, you would need to put in some sort of value and hit "Test". In addition, try disabling Smooth Track.

Finally figure it out. I had nothing to do with the Ronin-MX at all. I was a setting with the DJI Go app. The "Request Controller" button enabled the camera. Please make this change in the user manuals available online ASAP! The request control button on every other craft is to request control of the Entire flight platform not the camera. A simple RC bind does not do the trick. I hope this message saves other hours in trolling the forum.

Rtyung8186 Posted at 2016-8-9 03:15
Finally figure it out. I had nothing to do with the Ronin-MX at all. I was a setting with the DJI Go ...

Thank you for the update, I'm glad to hear that you were able to get yourself up and running.

Hi Ryantyoung

Does the matrice worked with the MX and the red dragon during fligth?

fans98c3c2ef Posted at 2016-11-7 22:05
Hi Ryantyoung

Does the matrice worked with the MX and the red dragon during fligth?

In what way are you hoping to confirm?

I'm very happy with my inspire pro. I'm trying to get info on the M600 for Red camera (Weapon). But it seems that there's a lot of vibration issue during flight ...

fans98c3c2ef Posted at 2016-11-9 16:40
I'm very happy with my inspire pro. I'm trying to get info on the M600 for Red camera (Weapon). But  ...

Are you using a Ronin MX or a different gimbal? If you have the MX, is the camera balanced?

fans98c3c2ef Posted at 2016-11-9 03:40
I'm very happy with my inspire pro. I'm trying to get info on the M600 for Red camera (Weapon). But  ...

They just came out with a "PRO" version so I hope you didn't get the M600 yet.  The Pro version is the same general price point but much better, and offers much more.  I have tried my setup with a RED, and immediately downgraded back to a GH4 as it just wasn't feasible.  It's doable but you must have extra roads and counter balances depending on what lens you use.  It ends up being a bit hanky looking.   

fans98c3c2ef Posted at 2016-11-9 00:40
I'm very happy with my inspire pro. I'm trying to get info on the M600 for Red camera (Weapon). But it seems that there's a lot of vibration issue during flight ...

The vibration issue come from the camera being out of balance. Our M600 with RMX and RED dragon has been used for studio quality imagery.

fans98c3c2ef Posted at 2016-11-7 06:05
Hi Ryantyoung

Does the matrice worked with the MX and the red dragon during fligth?

Yes. The Red works with the M600/RMX combo.