image23
lvl.1
Flight distance : 256686 ft
Italy
Offline
|
Ok I found the solution thanks to the previous owner. It was not software problem but a hardware one.
Probably, the Zenmuse got some kind of shock during transport and so the camera was not level anymore.
Here's the way to solve it.
- power your drone
- once the Zenmuse finished it's calibration dance, and the stabilisation motors of the Zemuse are still running you have to delicately unscrew the 2 screws you see on the picture below
- then you have to level the camera by eye (Yes, it is not a joke), the Zenmuse doesn't know by itself when it is level
- once it is level screw the screws tide again.
- you might have to do it a few few times until you are perfectly level
- that's it!
|
|