Mark The Droner
Captain
Flight distance : 2917 ft
United States
Offline
|
Michel1965 Posted at 12-12 18:53
Hi, I'm not sure, because it was more than a year ago, but from the files I still have on my pc I upgraded from P3X_FW_V01.04.0010 to P3X_FW_V01.09.0060. I also have the files P3X_FW_V01.11.0020 and P3X_FW_V01.11.0030 on my pc, probably I tried to upgrade to these files later. At that time they mentioned in this forum also to ask for a bin file that could resolve the problem, but nothing helped.
The bad thing was also that it stopped working when I wanted to take off at a real estate client. A few months later, after reading a lot of forums, spending many days trying to fix it, it suddenly worked again. So I called my real estate client that I had my drone working again, made a new appointment, but once I was at the client and wanted to take off, it didn't work again. They were not amused, to say the least. I did normal photography for them too, but they never hired me again since.
Okay - so although you haven't told us, we can assume you have a Phantom 3 Professional.
We know that if you upgrade FW from a lower AC FW to AC FW 1.8 or above, you must also upgrade your RC FW to 1.6 or above. Otherwise you will have encryption issues. That might be your problem.
You should also always use a fan to blow cool air onto your gimbal when doing a AC FW upgrade to your P3P. Otherwise you could burn out a board on your P3P. So it's possible that's your problem.
You should probably read this post which you will likely find helpful: https://phantompilots.com/thread ... .87175/#post-901549
Good luck |
|