Please select Into the mobile phone version | Continue to access the computer ver.
No signal and blank screen in DJI Go App, Cant update firmware
698 3 2016-8-23
Uploading and Loding Picture ...(0/1)
o(^-^)o
Shaun_au
lvl.2

Australia
Offline

Hi Service Techs,
I am having the same problems with my P3P, was working fine then got it out a week later and no signal and screen wont show camera display but takes pictures and video fine but only direct to SD card so useless to fly with as i cant see anything to know what im taking photos of and if they are exposed correctly.

DJI please help i have only just got it back from a warranty camera replacement and now i cant update the firmware, it rejects every version on the DJI website

2016-8-23
Use props
Shaun_au
lvl.2

Australia
Offline

I am having the same issues as all of the people in the thread link below.
http://forum.dji.com/forum.php?mod=viewthread&tid=29464&extra=page%3D1%26filter%3Dtypeid%26typeid%3D369&page=1

2016-8-23
Use props
Shaun_au
lvl.2

Australia
Offline

I am having the same issues as all of the people in the thread link below.
http://forum.dji.com/forum.php?m ... id%3D369&page=2
2016-8-23
Use props
DJI-Jamie
DJI team
Flight distance : 112405 ft
United States
Offline

Could you provide a screenshot of what you are able to see from the Camera View, Image Tansmission and of the About page as well? To rule out an image issue with the RC, please try the following button combination:

* Turn on the controller, and the aircraft should be off.
* Press C1, C2, and shutter on the controller then turn the controller off.
* Turn on both the aircraft and the controller and link the remote.
2016-8-23
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules