skyvideoct
lvl.4
Flight distance : 1136230 ft
United States
Offline
|
Hammer_Time Posted at 2017-7-13 14:04
I know this is old, but we have a M600 pro roninmx comboi with srw60. the problem is hooking up a pilots cam. with the srw60 using the hdmi and the AV being the same signal, we bought the n1 video encoder because from what i was told , it will give you another HDMI out. The problem is there is no cable to hook it up to anything on a M600. Seriusly frusterated with this entire setup. We have purchased an inspire 1 pro, inspire2, X5s, X4s, zenmuse xt, Z30, M210rtk (which is late as well) and much more totalling close to $100,000. The way the M600pro is setup make zero sence. we have spent another $600 on modules and receivers and everything (all DJI) and still no easy way to have a pilots cam wired in at the same time as the camera. this is not a professional setup and is complete nonsense that a setup that cost this much doesn't do what it should
Actually, I've been using a FLIR Duo-R for FPV and have no issues with what is essentially a 3 camera setup. I'm using a feiyu-tech gimbal for the Duo-R with a custom ribbon cable for the hdmi out to the hdmi port on LB2. Yes, I do have to go into the setting to switch feeds from the DJI camera to the Duo, but this works fine for me. |
-
|