Please select Into the mobile phone version | Continue to access the computer ver.
No light on 2 Vision camera
608 10 2016-9-16
Uploading and Loding Picture ...(0/1)
o(^-^)o
lUWjgm5KoxVG
lvl.1

Australia
Offline

I'm not getting any lights on my Vision 2 camera. Anyone any tips or things I can try?
2016-9-16
Use props
DJI Mindy
Administrator
Flight distance : 7 ft
Offline

Hello, do you mean there's no video transmission?
2016-9-16
Use props
lUWjgm5KoxVG
lvl.1

Australia
Offline

DJI Mindy Posted at 2016-9-17 15:47
Hello, do you mean there's no video transmission?

Sorry, yes the app will not connect. There is no light on the camera. I have checked and have power at the plug, but the camera will not switch on.
2016-9-17
Use props
DJI Mindy
Administrator
Flight distance : 7 ft
Offline

lUWjgm5KoxVG Posted at 2016-9-18 10:12
Sorry, yes the app will not connect. There is no light on the camera. I have checked and have powe ...

Can you take photos or record videos ?
2016-9-17
Use props
lUWjgm5KoxVG
lvl.1

Australia
Offline

DJI Mindy Posted at 2016-9-18 10:15
Can you take photos or record videos ?

No. I cannot connect to the camera through the app, so no photos or video. The camera should have a light on when the drone is powered up, but I have no light, no connection and no photos or video.
2016-9-18
Use props
DJI Mindy
Administrator
Flight distance : 7 ft
Offline

lUWjgm5KoxVG Posted at 2016-9-18 19:10
No. I cannot connect to the camera through the app, so no photos or video. The camera should have  ...

Have you tried to re-bind the range extender again?
Could you please check the "About" page on the APP and post a screenshot here?
2016-9-18
Use props
quanthonytrang
First Officer
Flight distance : 419980 ft
  • >>>
Australia
Offline

There are 3 sets of cables that come from the Phantom to the gimbal board. The 2 wide cables acts like a bridge to power up the gimbal. Unplug these 2 and inspect and make sure they are not damaged. Reseat them firmly and try again. If this does not work, then chances that the wifi module is dead or not sending power to the gimbal.

To see if there is power to the wifi module, you will need to open up the phantom. With the newer revised modules, they are perforated with holes. You can actually see if there is power by looking through the holes to see if the LEDS flash green or red.
2016-9-19
Use props
lUWjgm5KoxVG
lvl.1

Australia
Offline

DJI Mindy Posted at 2016-9-19 11:51
Have you tried to re-bind the range extender again?
Could you please check the "About" page on the ...

Before I go through any processes can you please tell me, if I set the camera switch to on or wifi on, should the camera have a light come on?
2016-9-19
Use props
DJI Mindy
Administrator
Flight distance : 7 ft
Offline

lUWjgm5KoxVG Posted at 2016-9-20 08:35
Before I go through any processes can you please tell me, if I set the camera switch to on or wifi ...

Yes, normally it would light up.
2016-9-19
Use props
lUWjgm5KoxVG
lvl.1

Australia
Offline

I have no light whatsoever
2016-9-19
Use props
lUWjgm5KoxVG
lvl.1

Australia
Offline

Does this mean my camera is dead?
2016-9-20
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules