Donnie
First Officer
Flight distance : 3636782 ft
United States
Offline
|
"However, as you can see my RC is with 1.6.0 and I am trying to remove my aircraft from flight mode and it is not responding" What do you mean by "Flight mode" , do you mean you are stuck in Travel Mode .
If you are stuck in travel mode the Aircraft will not install the Update. You will have to rollback the RC to its original configuration . Hopefully the aircraft is really not at 1.2 becasue that would make no sense if the origingal RC was at 1.58. It would not have been able to communicate with the Aircraft if this was so.
Ok, if you have 1.6 on the RC and the Aircraft does not have a blue flashing light , try and load 1.9 FW to the Aircraft and then see if you can get a connection to the RC transmitter.
This is not the normal procedure, I think you need an different go app device to tell you the truth. ( even the yellow circle that indicates the amount of download is not working properly , try an I pad if you can borrow one and load the go app, it is super simple ) But the update should now work on the Aircraft if you have 1.6 on the RC and No Blue Light flashing on the Ac, this would indicate you are stuck in travel mode.
The only problem you may have is if the AC is not on version (at least ) 1.3 If 1.9 does not load then load the 1.3 file and then wipe the sd card and re format and load the 1.9 .
***Make sure you charge the RC transmitter as well to 100%, trying to update with a low battery on the RC is not good.
The strange thing is the "about " page does not list the "Aircraft Version" it just says 1.2.... If it indeed is this version then you must start with 1.3 and then go to 1.9.
Where did you buy this at ? If it has all this old FW on it it must have been in stock a LONG time.
donnie
|
-
|