Are there known problems with iOS10 with the DJI GO app?

C1 buttons messed up

R&L Aerial  Posted at 2016-9-20 04:40
C1 buttons messed up

Could you elaborate as to what issue you are having with the C1 button?

There have not been a lot of issues repoorted with iOS 10 specifically, since this is a reletively new update. It has helped many iOS users with image transmission issues.

DJI-Jamie Posted at 2016-9-20 00:13
Could you elaborate as to what issue you are having with the C1 button?

I can tell that when trying to use C1 button to recenter the camera it resenter the camera but at the same time give me a message saying that the Go app would like to communicate with the C1 button. I get a chance to Ignore or to allow. happens every time clicking the C1 button.

nilsblix@gmail. Posted at 2016-9-19 18:16
I can tell that when trying to use C1 button to recenter the camera it resented the camera but at  ...

Exactly....

I am also having the C1 button issue. Every time I press the C1 button, I get a message along the lines of "DJI Go app wants access. Ignore or allow?"

All worked well for me th is weekend, but I did have to reprogram  my C1 button. Took a few seconds while flying.

llbr22 Posted at 2016-9-20 06:29
All worked well for me th is weekend, but I did have to reprogram  my C1 button. Took a few seconds  ...

I did reprogram the C1 button - did not help

I am also having the C1 button issue. Every time I press the C1 button, I get a message along the lines of "DJI Go app wants access. Ignore or allow?"

This issue has been reported to our R&D team for further review, we should have a resolution soon. In the meantime, could you guys try resetting your RC using the following button combination:

* Turn on the controller, and the aircraft should be off.
* Press C1, C2, and shutter on the controller then turn the controller off.
* Turn on both the aircraft and the controller and link the remote.

After that, try reprogramming your C1 and C2 controls.