Please select Into the mobile phone version | Continue to access the computer ver.
A2 Control of Mark 2 Dual video switching
1675 4 2014-9-30
Uploading and Loding Picture ...(0/1)
o(^-^)o
craig
lvl.2
Flight distance : 2913648 ft
United States
Offline

The title pretty much sums up my scenarion.

I am trying to use the dual videom feature of the iosd Mark 2. I am flying an s900 with an A2 controller. I cannot tel if the canbuss connection already between them will pass the switching command from my futaba 14sg to the iosd. The port on the Mark 2 appears to go to a seperate reciever, not the A2.


Any insight?

Thanks

Craig Thompson
https://www.GlobalVideoHQ.com
2014-9-30
Use props
Blade_Strike
Super Moderator
Flight distance : 872694 ft
  • >>>
United States
Offline

Craig -

correct, the MarkII video switcher need to be connected to an rx output. If using the internal A2 rx you have 4 available external outputs, F1-F4. Just map the desired channel to one of those outputs.
2014-9-30
Use props
craig
lvl.2
Flight distance : 2913648 ft
United States
Offline

Worked perfect once I got the programming figured out. Thank you.
2014-10-2
Use props
wsdinc307
New
United States
Offline

will this work just as well with the Specktrum DSM2 system?
2014-10-20
Use props
Blade_Strike
Super Moderator
Flight distance : 872694 ft
  • >>>
United States
Offline

yes as long as you have a free channel.
2014-10-21
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules