Please select Into the mobile phone version | Continue to access the computer ver.
Cone Prosight compatability
698 7 2016-9-27
Uploading and Loding Picture ...(0/1)
o(^-^)o
mikeLmedic04
lvl.3
Flight distance : 256519 ft
  • >>>
United Kingdom
Offline

I am hoping to install a Connex Prosight in the nose of my DJI Inspire 1v2 quadcopter to give a permanent FPV live view. Can anyone confirm that the transmitation frequency will not cause interference with the Inspire?

The Connex is a digital system transmitting between 5150MHz to 5925MHz

I thought the Inspire was only 2.4ghz with the built in lightbridge but the DJI spec page shows:

Operating Frequency922.7~927.7 MHz (Japan Only)
5.725~5.825 GHz
2.400~2.483 GHz


Thanks,

Mike
2016-9-27
Use props
Farnk666
Captain
Flight distance : 1711394 ft
Australia
Offline

"transmitation frequency"??

Seriously?

As you can see there is an overlap - if you are keen, best thing is to just try it out in a controlled environment.
2016-9-27
Use props
markaguille
Captain
Flight distance : 2031818 ft
Guernsey
Offline

Hi Mike,

2.4 is for the controls 5.8 is for the video feed and with the channel hopping auto setting they should be able to work alongside each other. I'm not familiar with the Connex Prosight, where are you getting it from and how much are they charging?

Mark G.
2016-9-27
Use props
mikeLmedic04
lvl.3
Flight distance : 256519 ft
  • >>>
United Kingdom
Offline

Hello, is about £450 over here in England. I am looking at Amazon at the moment.
2016-10-2
Use props
Donnie
Captain
Flight distance : 3636782 ft
United States
Offline

markaguille Posted at 2016-9-27 12:19
Hi Mike,

2.4 is for the controls 5.8 is for the video feed and with the channel hopping auto settin ...

Mark , Not 100% sure on this but I think the 5.8 is used for the Master and Slave Communication , the 2.4 is used for control and video ( but on Separate 2.4 frequencies )

I will look  for confirmation on this

donnie
2016-10-2
Use props
Mike-the-cat
Captain
Flight distance : 17145948 ft
  • >>>
Singapore
Offline

Donnie, You are correct about 5.8GHz being used for Master / Slave RC communication. The same frequency is used for control and video.
2016-10-3
Use props
markaguille
Captain
Flight distance : 2031818 ft
Guernsey
Offline

Donnie Posted at 2016-10-2 19:06
Mark , Not 100% sure on this but I think the 5.8 is used for the Master and Slave Communication ,  ...

I think you are right Donnie, ignore my last remark. Wow, what was I saying just a couple days ago about never being wrong? Well there you go it happened, remember, you saw it here first guys.


Mark G.
2016-10-3
Use props
Donnie
Captain
Flight distance : 3636782 ft
United States
Offline

markaguille Posted at 2016-10-3 12:19
I think you are right Donnie, ignore my last remark. Wow, what was I saying just a couple days ago ...

There is a first for everything........welcome to the club

donnie
2016-10-4
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules