Please select Into the mobile phone version | Continue to access the computer ver.
hovering question
1038 3 2015-2-1
Uploading and Loding Picture ...(0/1)
o(^-^)o
jorukavi1
lvl.2
Croatia
Offline

Any information about the distances from the picture would be fantastic. Also I'd like to discuss the issue if you have some experience. Thank you in advance
Inspire 1_1.jpeg
2015-2-1
Use props
TravisSRT
lvl.4
Flight distance : 68555177 ft
  • >>>
United States
Offline

What are you asking, how much drift is acceptable?  I think DJI advertises GPS accuracy of around 6' or so, at least I think I read that somewhere.  Mine tends to stay inside of a 1-2' area horizontally and once above 6-8' off the ground holds its altitude very well.  Below 6-8' when outdoors mine will have 1-2' of altitude drift.  When inside and using P-OPTI it holds both extremely well and will even fight against outside forces to keep it's position.  I tested this by using a finger to pull one leg while in optical mode and it moved itself back to it's original hover spot!
15 - 00178.jpg
2015-2-1
Use props
jorukavi1
lvl.2
Croatia
Offline

Question is ... can I fly beneath bridge and than go under construction. (concrete and metal construction can make some problem with quality of gps signal and also propellers are making some air disturbance. I will show you in the picture.

bridge

Red arrow is location
2015-2-1
Use props
Tahoe_Ed
Second Officer
Flight distance : 2605 ft
  • >>>
United States
Offline

jorukavi1 Posted at 2015-2-2 12:18
Question is ... can I fly beneath bridge and than go under construction. (concrete and metal constru ...

If you travel under a bridge or construction with concrete and rebar or iron you will loose GPS and will be flying in ATTI mode.  Can you do that?  That is the question.  If so you will have no issues if not I would not attempt it.
2015-2-1
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules