The thing is that the glue stripe that will attaches them got busted when I took the remote apart, now I can’t make them stick where they should and I have been looking at Ebay and DJI, seems like there are nowhere to find? Anyone know?
I have been testing a lot of glued stripes but none of them will stick, bummer. ..
Geebax Posted at 2016-10-14 17:31
Fair enough. There is a 3M tape that will stick to rubber, but not generally available to the publ ...
Yeah, I have noticed on several remotes that I have taken apart to do antenna mods on that the clear adhesive DJI uses is good stuff. Will be interesting to hear what you guys come up with. I have managed to always salvage it and get them to stick back on, but wondered what I would need to replace it with if they start coming off at some point. I thought the 3M double-sides tape would work too, but guess not. If I come across anything Ill let everyone know, but until then keep us informed if you guys find something. Good luck!
Well, I found a way to do it and it seems like it works. I took my glue gun; it’s a thing that warms up a glues tick so it melts and I glued it together, still holding.
good idea, hope it holds. if not, open the remote and mark holes in the rubber where the screws are and drill holes out of the rubber - then glue it permanently - that's what I will do.
04red6 Posted at 2016-10-18 05:29
Use the two sided tape that is used to hold screens to phones and tablets. I have some and it works. ...
I know that it exists, but haven’t seen it myself. But it could work, no doubt about it. I’m not working with that kind of stuff anymore, so I have to use what I have. So far, it sticks.