hi,
i can not change channel mode for my p3p.
i have latest firmware craft 1.9.6 rc 1.8 dji go 3.01

anyone can help me?

i want try to reduce the delay and the lag.

thanks

dji go pic

That option is only available in the US I believe. However you can make it available by changing your device location to USA.

You would probably gain more however by leaving that on automatic as any delay or lag will likely be caused by the display device itself.

Have these delays/Lags always been there, or perhaps appeared after recent updates ?

Aardvark Posted at 2016-10-22 23:25
That option is only available in the US I believe. However you can make it available by changing you ...

thanks
they appear after ios 10 on my ipad mini 2
i'm thinking to downgrade to ios 9

massypic Posted at 2016-10-22 16:54
thanks
they appear after ios 10 on my ipad mini 2
i'm thinking to downgrade to ios 9

Have a look and see what's running in the background first, it might be easy enough to shut a few things down to free up memory and processing power for DJI Go.

massypic Posted at 2016-10-22 09:54
thanks
they appear after ios 10 on my ipad mini 2
i'm thinking to downgrade to ios 9

How do you downgrade an iOS firmware version?
Through iTunes... Hahaha


RedHotPoker

RedHotPoker Posted at 2016-10-22 23:26
How do you downgrade an iOS firmware version?
Through iTunes... Hahaha

Change region on your ipad to US.   CUstom icon will appear and stay even if you move region back.
Select custom and choose a channel, the one with the lowest bar.....   Problem gone......

vindes Posted at 2016-10-26 15:30
Change region on your ipad to US.   CUstom icon will appear and stay even if you move region back. ...

"Problem gone......"

Until you get interference on that channel, and the system no longer selects a clear channel to switch to. Better sticking to automatic channel select and finding the cause of the problem.

Aardvark Posted at 2016-10-26 18:48
"Problem gone......"

Until you get interference on that channel, and the system no longer selects ...

There is no reason whatsoever to believe that a single channel wouldn't function.
Check it out, and than at least you can confirm wher to look for a definite solution....

vindes Posted at 2016-10-26 18:38
There is no reason whatsoever to believe that a single channel wouldn't function.
Check it out, an ...

"There is no reason whatsoever to believe that a single channel wouldn't function."

So what happens when you get interference on that channel, loss of signal, loss of video, loss of control ?

If channel switching is on automatic then it will move to a clear channel if there is interference present.

vindes Posted at 2016-10-27 04:38
There is no reason whatsoever to believe that a single channel wouldn't function.
Check it out, an ...

DJI provide automoatic channel selection for a good reason. As Aardvark says, if another signal source comes up while you are flying, and the system is in custom mode, there is no way for it to switch to a clear channel. It coulds result is loss of the aircraft.

Geebax Posted at 2016-10-27 00:46
DJI provide automoatic channel selection for a good reason. As Aardvark says, if another signal so ...

The control of the aircraft is not via these channels......

Have fun.

vindes Posted at 2016-10-27 18:43
The control of the aircraft is not via these channels......

Have fun.

The channel used for control of the aircraft is also frequency agile.

Geebax Posted at 2016-10-27 11:08
The channel used for control of the aircraft is also frequency agile.

Yes, but it is always the same....
Have fun.

I came across This Post on another Forum. Another piece of evidence to confirm that the control channels as well as video channels are not fixed by default.

Have fun

Aardvark Posted at 2016-10-27 13:50
I came across This Post on another Forum. Another piece of evidence to confirm that the control chan ...

Changing to one channel solved my video lag problems for weeks now.  Just had another wonderful flight.  Fly, fly, fly, like a bird in the sky....