Hello everybody, i have a problem with my ph 3 advAnced, it has a delay in the transmission from the camera to the smartphone, i use a iphone 5s. Thank you

Would you please help clarify the firmware for aircraft and remote controller? the APP is the latest one?
You notice it after a firmware upgrading or out of the box? how long it delays?
Please cool it down, enable "Hardware decoding", and turn off all background programs.

Some delay is inevitable, given the MPEG method of video encoding, and the device used to display it can add to that with a decoding delay. Around 1 to 2 seconds is quite normal, anything longer may be an issue.

Are you experiencing 5-6 second lag?? Reset the camera. Unplug the 2 cables coming into the gimbal board. Wait 30 seconds or so and reseat them.
If this occurs again, send it back into DJI if you still have warranty. If not, then you can do the fix yourself.
DJI is renowned for heat-sink issues (un-perforated wifi module). Unlike the Pro, the adv does NOT have a cooling fan. It relies on some padding and a bit of good-luck-paste. Follow the instructions below to keep the processors cool. Its a tutorial on pulling the camera apart and adding some addition cooling pads to overheating chips/processors.

http://uavdoc.com/2016/phantom-3-advanced-video-lag-fixed/7/

quanthonytrang Posted at 2016-10-25 06:38
Are you experiencing 5-6 second lag?? Reset the camera. Unplug the 2 cables coming into the gimbal b ...

+1 On my P3A it's the narrower connector that needs re-seating now and again. It's the hardest one to get to too!!!

You could also turn off video caching in the Go app. Personally I only view and use the video on the SD card anyway.

Hi, my version are: app3.0.1.
Controller1.8.0.
Ph1.9.6.
It worked good at the first time,then i leave it for a week without use it and when i used again notes the delay. Sorry for my English,  but I'm learning. Thanks

Thanks everyone i fixed it

quanthonytrang Posted at 2016-10-25 01:38
Are you experiencing 5-6 second lag?? Reset the camera. Unplug the 2 cables coming into the gimbal b ...

Thank you very much, i did like you told me, god bless you

quanthonytrang Posted at 2016-10-25 01:38
Are you experiencing 5-6 second lag?? Reset the camera. Unplug the 2 cables coming into the gimbal b ...

Thank you very much, i did like you told me, god bless you

Hello, have somebody  used a a iPad mini 2 for dji 4?