Please select Into the mobile phone version | Continue to access the computer ver.
Ronin Motor Wont Stop Shaking
3181 7 2014-10-1
Uploading and Loding Picture ...(0/1)
o(^-^)o
thalesbanzai
lvl.1

Brazil
Offline

Hi. I just bought a Ronin a couple days ago. I did a few tests with my Red Scarlet and a Canon 7D, on both cameras it worked perfectly.
The problem is that now that I recharged the battery, onde I try to start the Ronin, it starts to tremble very violently and noisy, and wont stop
until I hit the MOTOR KILL.
Here is a video that I shot, where you can see and here the problem:



How can I solve this? Any idea? I really need it to work.

Thanks,
2014-10-1
Use props
titorolon
lvl.2
Flight distance : 4131 ft
Spain
Offline

Reduce motor Stiffness.
Every time you setup a new camera you have to click on the Auto Tune, and then set Stiffness Manually.
For 7D values goes from 15 to 20 aprox.
For Scarlet, I don't know because I always use Epic, for Red Epic values are around 60.
2014-10-1
Use props
thalesbanzai
lvl.1

Brazil
Offline

Ok. I'll try it out a few more times to see what happens.

Thanks.
2014-10-1
Use props
titorolon
lvl.2
Flight distance : 4131 ft
Spain
Offline

thalesbanzai@gm Posted at 2014-10-2 02:35
Ok. I'll try it out a few more times to see what happens.

Thanks.

I forgot to say that the Ronin has to be balance.
In your video you have no camera on it, and it is not balance.

Put a camera, balance it as per manual or video tutorial, and then do what I said before.
2014-10-1
Use props
thalesbanzai
lvl.1

Brazil
Offline

Yeah. The problem was that it had no camera. As I said, I tried with the Scarlet and 7D and both worked.

Thanks.
2014-10-1
Use props
dylan
lvl.2
United States
Offline

titorolon Posted at 2014-10-2 02:24
Reduce motor Stiffness.
Every time you setup a new camera you have to click on the Auto Tune, and th ...

EPIC and Scarlet weight the same (5 lbs body only)  - differences are primarily internal.
2014-10-25
Use props
nick.galanti
lvl.1

United States
Offline

I have a GH4/7d and if I understand the stiffness should be set manually to 15 - 20 manually?  After autotune it is set to 55 then I go down from there?
2014-11-6
Use props
sochin33
New

United States
Offline

Where is the answer to above ^^^^^ question ?
2014-11-13
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules