I have been lucky and have not had any problems with v3.10. I have about 5 flights with 3.10.Should I revert back to 3.08 or is that mainly for the people that had the problems with 3.10?

DJI might be the only ones that know the answere but what is your opinion?

I've had zero problems with V3.10.  In fact, by upgrading to V3.10, upgrading the range extender (using the app) and ensuring that the camera on my Phantom Vision had the latest firmware...the Vision App went from crashing all the time to being ROCK SOLID.  Just finished a flight with zero crashes of that app - smooth, perfect...very cool!

Are you flying a vision or vision plus? I have a phantom 2 vision and have upgraded all the firmware ,camera etc but am terrified to fly it after reading about all the issues people have been having

I'm flying a Vision...and with V3.10...perfect flying.  In fact, features that were supposed to work previously, like the "Ready to Fly" notification, started working once I went from 3.8 to 3.10.

Hi. When I opened DJI Assistant today, an announcement popped out saying "...please reset your firmware to the prior version (v3.08) immediately." which I just did.

ian.ford.ymail Posted at 2015-2-5 17:40
Are you flying a vision or vision plus? I have a phantom 2 vision and have upgraded all the firmware ...

I am flying a vision plus v3.0.

I just went back to 3.08 and took the phantom out for a test flight with no problems.
Even though 3.10 work ok for me, Still, the lesson I learned form this is don't update the Phantom if all is working well until DJI's "BATA tester" I mean customers test it first and give the green light.

can any one tell me how to revert back to 3.08?

I can't believe this - I had 3.08 firmware - tried to upgrade to 3.12 -
Just spent an hour on the phone with DJI - Error - now is mis match firmware - upgrade you MC
they tell me there is no way to go back to 3.08 -
or - I can try redownloading 3.6 - which I did and it only gives you latest version to update as well.
can anyone please tell me how to get back to 3.08???

beapilot.gmail Posted at 2015-2-5 08:41
I've had zero problems with V3.10.  In fact, by upgrading to V3.10, upgrading the range extender (us ...

Same here. 3.10 has been great for me (so far)

flybyvideopros@ Posted at 2015-3-17 03:56
I can't believe this - I had 3.08 firmware - tried to upgrade to 3.12 -
Just spent an hour on the p ...

I fortunately haven't had to reinstall a previous version, but can you take the Assistant Software off your computer and download the older Assistant software off of the DJI website?

I"m pretty sure DJI uploads a new Phantom Assistant software application to their site when firmware is totally upgraded.

flybyvideopros@ Posted at 2015-3-17 03:56
I can't believe this - I had 3.08 firmware - tried to upgrade to 3.12 -
Just spent an hour on the p ...

If you want or can figure a way to send me an email I will send 3.06 to you...I have the original .exe. Files from when released...

DJI recommend not using 3.10

tonyphantom147@ Posted at 2015-3-22 04:55
DJI recommend not using 3.10

Tony,
Thanks, where you been,
This was posted back on February 6th...
http://forum.dji.com/forum.php?m ... ht=3.10&lang=en

and replaced with this on March 3rd,
http://forum.dji.com/forum.php?m ... ht=3.12&lang=en

Northofthe49th Ok , I installed your assistant is also lowering 3.06 3.12 firmaware please as we get the 3.08

mhorellana@hotm Posted at 2015-3-22 05:48
Northofthe49th Ok , I installed your assistant is also lowering 3.06 3.12 firmaware please as we get ...

mhore,
Sorry, not sure what you are asking,
If you installed the 3.6 Software on the Computer then updated the firmware then you now have or should have firmware v3.08 in your Phantom. PLEASE SEE NOTE BELOW.....

Please confirm with screen capture!!

Note:
Phantom Vision Assistant 3.6 Software includes the Phantom 3.08 Firmware. (This is the old/last version).
Phantom Vision Assistant 3.8 Software includes the Phantom 3.12 Frimware. (This is the most current).

Hi, Nort, The DJI Phantom 2 Vision Assistant version 3.6 and 3.8, both are downloading firmware 3.12 , you can not have access to version 3.08